Farm Supplies Machinery & Equipment

NHVH XHD Series blade hydraulic model. - 2.12m.
Extra Heavy Duty.
For a wide range of material handling work.
NHVH models offer even more, such as fully hydraulic (or manual) angle, tilt and offset.
From landscaping to heavy duty dam-building jobs.
Up to 120hp tractor. Skid shoes increase the life of the cutting edge and avoid damaging the working surface while cleaning corrals or ploughing snow.
An important factor in the performance of the rear blade is he precision-formed moldboard with the exact curvature necessary to achieve maximum penetration.
This added precision allows to cut and roll the soil rather than dragging, which saves time, horsepower and fuel.
Attachments available:
End plates allow rear blade to hold in material for filling.
(Image shown is not the 2.12m model)
Features:
- Swing Angle: 43°L/R
- Tilt Adjustment: 15°U/D
- Offset Adjustment: 48cm L/R
- Tail Wheel: N/A
- Hose kits to rear remotes: 3 circuits
- Mounts: Cat II-3 PL
- HP Range: 120 (2WD) 110 (4WD)
- Cutting Edge: ½inch x 6 inch reversible interchangeable
- Weight : 527 kg
Options available at an extra cost:
- Single wheel upgrade
- Hydraulic depth wheel upgrade ( add single wheel where requires)
- 12v diverter kit.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BISON 2.12M HYDRAULIC GRADER BLADE EXTRA HEAVY DUTY (NHVH), SUIT UP TO 110HP (2WD)

76mm / 196mm Hammer Flail.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HAMMER FLAIL - 76MM TOP WIDTH, 196MM BOTTOM WIDTH - REPLACEMENT FOR PERFECT

150mm - 3 Series Auger up to 5T for 3 point linkage. Standard conditions - Tungsten Carbide.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 150MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

350mm - 1 Series Auger for Post Hole Borer.
Standard conditions - Tungsten Carbide.
A1 soft earth
Bladed teeth for soft earth/clay.
Earth Auger for general purpose drilling.
Designed to reduce auger jam, the A1 auger features its cutters on one side as well as a restrictor plate to reduce overrun.
Available in earth or tungsten carbide (TC), providing longer wear life and greater cutting performance. Not suited for rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
Specifications:
- Drilling Conditions: Soft earth
- Hub: Stihl Style 25mm Round
- Overall Length: 960mm
- Flights (Lead): 6mm
- Flights (Carry): 6mm
- Teeth: TS
- Pilot: PS
- Ideal Drives: One man borer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 350MM AUGER (STANDARD - TUNGSTEN CARBIDE) FOR POST HOLE BORER

Bush.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX BUSH - 16MM ID, 25MM OD - REPLACEMENT FOR MCCONNEL, BOMFORD, BERTI

Muratori MT11-105 is suitable for tractors up to 25HP, comes with rear roller, hammer blades and over run clutch in gearbox. For grass management.
Specifications:
HP 16-25
Number of hammer blades 16
Optional:
Y blades 32
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN MURATORI 1.05M MT11 105 MULCHER (16-25HP)

The Flex Wing Topper is a three point linkage mounted machine which folds up to 2.3m (7ft 6in) transport width.
Like all MAJOR machines, the Flex Wing Topper is of robust construction. CE conformity is achieved through full PTO guarding and heavy rubber skirting to prevent debris from escaping.
The wing cutting decks are raised by hydraulic control to transport position. The wings are capable of flexing from -15 to +25 degrees allowing the cutting unit to follow the ground contours.
Contra-rotating swinging blades are retained in hardened steel bushings and clamped by sprung steel blade backs.
Under-sole discs are fitted to prevent scalping and ensure a perfect finish every time.
Features:
Robust pivot points
Rubber shock absorbers
Slip clutch PTO protection
Hydraulic wing lift
ProCut swinging blades
88mm (3 1/2in) blade overlap to eliminate striping.
Model:
MJ38-540 5.4m (18ft) 1,395 kg 60-160HP 6 Rotors 50-250mm Cutting Height
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR FLEX WING TOPPER SERIES MJ38-540,60-160HP

Mower Blade Retainer.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX MOWER BLADE RETAINER - M12, 33MM LENGTH - REPLACEMENT FOR KUHN, TAARUP

Double 5ft Round Bale Grab with Spikes. Requires Front Remote.

BURDER DOUBLE 5FT ROUND BALE GRAB WITH SPIKES

Sliding Saucer.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX SLIDING SAUCER - 860MM OD - REPLACEMENT FOR PZ, DEUTZ-FAHR, VICON

400MM 4 Series Auger (Standard conditions- Tungsten Carbide) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 400MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD -HYDRAULIC DRIVE

450MM RC4 Series Auger (Earth/Rock combo - Tapered Teeth) up to 5T for Ramdrill PHD - Hydraulic drive.
Price inclusions: Auger, teeth, pilot, pin and clip.
RC4 earth/rock
Digga's RC4 Augers come with tapered tungsten TAPERLOC teeth, which are designed for drilling in earth, shale, asphalt, permafrost and fracturable rock.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: Combo Earth & Rock
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TT
- Pilot: PM-HX-3
- Ideal Drives: PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: not recommended
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 450MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL - HYDRAULIC DRIVE

Find Machinery Attachments For Sale. Browse 1375 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

BISON 2.12M HYDRAULIC GRADER BLADE EXTRA HEAVY DUTY (NHVH), SUIT UP TO 110HP (2WD)

SPAREX HAMMER FLAIL - 76MM TOP WIDTH, 196MM BOTTOM WIDTH - REPLACEMENT FOR PERFECT

DIGGA 150MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

DIGGA 350MM AUGER (STANDARD - TUNGSTEN CARBIDE) FOR POST HOLE BORER

SPAREX BUSH - 16MM ID, 25MM OD - REPLACEMENT FOR MCCONNEL, BOMFORD, BERTI

DAKEN MURATORI 1.05M MT11 105 MULCHER (16-25HP)

MAJOR FLEX WING TOPPER SERIES MJ38-540,60-160HP

SPAREX MOWER BLADE RETAINER - M12, 33MM LENGTH - REPLACEMENT FOR KUHN, TAARUP

BURDER DOUBLE 5FT ROUND BALE GRAB WITH SPIKES

SPAREX SLIDING SAUCER - 860MM OD - REPLACEMENT FOR PZ, DEUTZ-FAHR, VICON

DIGGA 400MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD -HYDRAULIC DRIVE

DIGGA 450MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL - HYDRAULIC DRIVE

Farm Supplies Machinery & Equipment

Dealer Address