Farm Supplies Machinery & Equipment

Loader Tine specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHW LOADER TINE - STRAIGHT, 810MM LENGTH (FLUTED)

The Flex Wing Topper is a three point linkage mounted machine which folds up to 2.3m (7ft 6in) transport width.
Like all MAJOR machines, the Flex Wing Topper is of robust construction. CE conformity is achieved through full PTO guarding and heavy rubber skirting to prevent debris from escaping.
The wing cutting decks are raised by hydraulic control to transport position. The wings are capable of flexing from -15 to +25 degrees allowing the cutting unit to follow the ground contours.
Contra-rotating swinging blades are retained in hardened steel bushings and clamped by sprung steel blade backs.
Under-sole discs are fitted to prevent scalping and ensure a perfect finish every time.
Features:
Robust pivot points
Rubber shock absorbers
Slip clutch PTO protection
Hydraulic wing lift
ProCut swinging blades
88mm (3 1/2in) blade overlap to eliminate striping.
Model:
MJ38-540 5.4m (18ft) 1,395 kg 60-160HP 6 Rotors 50-250mm Cutting Height
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR FLEX WING TOPPER SERIES MJ38-540,60-160HP

This heavy duty professional range for tractors of up to 150 hp with side shift and front or rear mounting is the entry level to the top range of Müthing mulchers along with super heavy professional equipment covers performance ranges of tractors of more than 400 hp.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-M Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with heavy duty multi position Headstock Cat.
II for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Gearbox with integrated over run clutch and through drive for 1000 r.p.m.
Automatic belt tensioning.
High tempered M Hammer flails with self sharpening cutting edge to ensure a clean cut and maximum shredding using less power.
Spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Large self-cleaning roller to carry the flail mower, adjustable for different heights.
Wearing skids.
Stand.
P.T.O. shaft and guarding to ISO Standards.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut..
Purposely designed hood in conjunction with high rotor and cutting speeds and a fixed shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Shock Absorbing Linkage Springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Heavier PTO shaft with hardened inner pipe and cap bottom lubrication - additional charge.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Scraperhood inclusive bleed for displaced roller towards the back, starting from model 2016.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wearing Plate (Factory Mounted).
Model:
MU-M 220 2200mm 150 HP WW 2200mm Overall width 2400mm Weight 840kg Flails 18
MU-M 250 2500mm 150HP WW 2500mm Overall width 2700mm Weight 900kg Flails 22
MU-M 280 2800mm 150HP WW 2800mm Overall width 3000mm Weight 970kg Flails 24
MU-M 300 3000mm 150HP WW 3000mm Overall width 3200mm Weight 1100kg Flails 26
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-M 280 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

Loader Bracket specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX LOADER BRACKET (PAIR) - REPLACEMENT FOR BOBCAT

Rock Bucket 1740mm (68inch) with Euro Hitch.
Price inclusions: 2 inch Tyne spacing rock bucker and built in frame.
Suits Tractors - other frame types may be available.
The Digga Rock Bucket is used for fast clean-ups, sifting out debris & rocks, and gathering material away from buildings and obstructions. Rock buckets can also be used in waste processing applications.
Operators now wishing to minimise waste on site will find that with the use of this type of bucket, material can be sifted and sorted to clean out unwanted material and leave good soil or material behind.
Rock Bucket Features & Benefits:
- Sizes range from 1740mm (68") through to 2222mm (87")
- Manufactured from Solid 28mm 1045 grade steel round bar
- 52mm (2") tine spacing
* See photos for more information and specifications on other sizes.

Specifications:
- 1740mm
- Weight (with multifit frame): 299 kg
- Length: 1079 mm
- Width (Overall): 1740 mm
- Height: 537 mm
- Tyne Spacing: 52 mm
- Number of Tines: 22
Options:
- Bolt on frame
Accessories:
- Grapple attachment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA ROCK BUCKET 1740MM - EURO HITCH - RB-000109

The Nobili TLP mulchers are suited to low horsepower tractors up to 30HP for grass with cutting height maintained by the rear roller.
Features:
Suggested Use: Grass mowing only.
Construction: Low profile body, no opening tailboard.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with overrun clutch, taper locked pulleys and electronically balanced rotor.
Control: Fixed headstock.
Attachment: Cat. I and II three point linkage.
Height Control: Roller (standard fitment).
Specifications:
Connection Type: Linkage
HP: 25-60
Y Blades Standard
Working Width (mm): 1600
Weight (kg): 1205
Dimensions WxHxD (mm): 1750W 460H 760D
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI TLP PASTURE MULCHERS 1.6M - TLP160/06, SUIT UP TO 30HP TRACTOR

Front or Rear Mounting for Tractors up to 90HP.
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 200 MULCHER FRONT OR REAR MOUNTING

Painted AHS/150 Slasher. A heavy duty slasher for general farm pasture and small sucker regrowth slashing.
Features:
- 150cm/60 ins cut width
- 75 HP gearbox.
- 6 series drive shaft with friction clutch.
- 5mm plate body with Z formed front and rear apron -for maximum strength.
- Laminated Bisalloy blade beam with offset suction lift blades.
- Adjustable side skirts.
- Clevis hitch 3 point linkage.
- Optional extras.
Optional extras:
- Slasher galvanised (4WAHS150-G)
- Chain top link
- Chain guard front in lieu of rubber
- Chain guard rear in lieu of rubber
- Single height wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM PAINTED 150CM ROTARY SLASHER (75HP) - AHS SERIES

SPAREX LOADER BRACKET - REPLACEMENT FOR MANITOU

Bale Frame specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HD BIG SQUARE BALE FRAME - 2 X 1,100MM & 2 X 810MM (CONUS 2) - 1,500KG LOAD CAPACITY

750MM 4 Series auger up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 750MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Mulchers with a broad range of potential uses, ideal for the shredding of pruning residues, vine-cuttings, plant remains, bushes, grass.
Also ideal for the upkeep of roadsides, the maintaining of non-seeded areas, pastures and hunting grounds.
The VKM 210, 240, 280 and 305 series is equipped with mechanical or hydraulic axial side shift and wheels (or roller) with removable bottoms placed behind the rotor, to prevent the flattening of the chopped product.
Specifications:
Tractor Connection: Linkage (Cat II, floating top link)
Connecting position: Rear
Engine speed rpm: 540/1000
Tractor horse power HP: 90-150, KW: 66-110
Cast Hammer Blade: 28
Working Width: 2793mm
Weight: 960kg
Features:
Suggested Use: Grass and green pruning's to 90mm diameter.
Construction: Medium profile body and one mulching bars.
Control: Hydraulic side shift.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced 8 row rotor.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Roller with removable ends (standard fitment).
Options:
- Left hand offset
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 2.8M VKM MULCHER (SUIT 90-150HP)

Find Machinery Attachments For Sale. Browse 1375 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

SHW LOADER TINE - STRAIGHT, 810MM LENGTH (FLUTED)

MAJOR FLEX WING TOPPER SERIES MJ38-540,60-160HP

MUTHING MU-M 280 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

SPAREX LOADER BRACKET (PAIR) - REPLACEMENT FOR BOBCAT

DIGGA ROCK BUCKET 1740MM - EURO HITCH - RB-000109

NOBILI TLP PASTURE MULCHERS 1.6M - TLP160/06, SUIT UP TO 30HP TRACTOR

MUTHING MU-O 200 MULCHER FRONT OR REAR MOUNTING

AGRIFARM PAINTED 150CM ROTARY SLASHER (75HP) - AHS SERIES

SPAREX LOADER BRACKET - REPLACEMENT FOR MANITOU

SPAREX HD BIG SQUARE BALE FRAME - 2 X 1,100MM & 2 X 810MM (CONUS 2) - 1,500KG LOAD CAPACITY

DIGGA 750MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD - HYDRAULIC DRIVE

NOBILI 2.8M VKM MULCHER (SUIT 90-150HP)

Farm Supplies Machinery & Equipment

Dealer Address