Farm Supplies Machinery & Equipment

A rugged, extra tough slasher built to take real punishment from continuous work ideal for contractors.
Features:
Extra strong build 6mm top plate with exceptionally strong perimeter and centre tubular crossmembers where it counts.
Adjustable skids. Contractor option fitted with additional runner for wear.
Two-pack paint finish. Contractor option has hot dipped galvanised body.
Headstock made from heavy angle and RHS and fitted with floating (toggle) top link. Optional chain stays available.
Bondioli & Pavesi (Italian) Series 8 pto driveshaft with integrated 4 plate slip clutch protects slasher and tractor. An integrated clutch means less wear between the clutch and pto shaft.
110 HP oil lubricated Italian Comer gearbox with 1:1.5 ratio and excellent seal protection with 5 Year Manufacturers Warranty.
Straight reversible 100 x 12mm Boron slasher blades are standard with stepped configuration as an option. All bushes are through hardened. Made in Australia, the blades are hardened and tempered in the 40-45 Rockwell range. This range gives excellent hardness while delivering strength and fatigue resistance. Any harder and they potentially become brittle.
Hardened and tempered spring steel rotor blade assembly. Bolt head protection on contractor option allows easy changeover of blades.
Dual puncture proof solid rubber wheelkits enable easy depth control. Standard with contractor option.
Front and rear chain kits are standard with easy to replace chain pieces.
Specifications:
Adjustable Skids
Front and Rear Chains
Cutting Width 2050mm
Overall Width 2200mm
Tractor HP 75+
Cutting Height 25-100mm
Weight 635kg
Options:
0089 EHD210 with adjustable skids offset
0099 Wheel Kit suit EHD210 Solid Rubber Wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS EHD210 SLASHERS 2.1M - 0097- 75+HP

325MM 4 Series Auger (Heavy conditions-(MFT) Multi Facet Tungsten-Hard ground) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 325MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD - HYDRAULIC DRIVE

4 in 1 Bucket 6000 series - 1.65m
The 4 IN 1 bucket has many advantages over the standard bucket:
Features:
- Allows the operator to open the bucket to release material instead of dumping the material.
- When the bucket is opened, the exposed blades on the rear and front end of the bucket can be used for earthmoving activities.
- Allows the clamping of objects and is ideal for picking items like broken branches.
Specifications:
- Width (m): 1.65m
- HP Range: 40-60
- Struck Capacity (m3): 0.20
- Rated Capacity (m3): 0.26
- Dimensions LxWxH (mm): 1710 x 640 x 550
- Weight (kg): 230
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 4 IN 1 BUCKET 6000 SERIES 1.65M - 40-60 HP RANGE

7ft Stick Rake recommended for tractors less than 90HP.
Ideal for light grading, levelling, and general raking of sticks, leaves and stones.
Great for fire hazard reduction.
Includes 42 spring steel tines, rake rotates 360 degrees allowing for angular and reverse settings.
Heat treated and 5/16 x 1 spring steel tines.
Also available in sizes...
4ft stick rake
5ft stick rake
6ft stick rake
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 7FT STICK RAKE, 42 TINES- 7LR - SUIT UP TO 90HP

For front mounting vehicles without PTO Müthing supplies the MU-FM/Hydro flail mulcher with a powerful hydraulic motor.
As the basic professional model of the MU-FM/Hydro has the same build as the MU-FM. It of course also possesses the same impressive operating and quality advantages as the MU-FM, comparable versatility and identical optional equipment.
The drive of this mulcher requires an oil volume of 35 L/mIn at a pressure of about 180 bar up to a max of 70 LPM.
This means that the MU-FM/Hydro can be used both on yard loaders and special hydro traction vehicles. A large selection of mounting adapter plates for these vehicles simplifies mounting and optionally available hydraulic control blocks (spool) facilitates mounting onto vehicle hydraulic systems for oil volumes in excess of 48 L/min.
Features:
Manufactured from High Quality QSt/E Steel for front mounting for skid steering loaders.
Hydraulic drive for a volume flow from 35-70 l/min, with over run valve.
Belt protection with tension measuring slot.
Shackle M Carbide flails.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin
Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment.Side, wearing skids.
Carbide wearing skids, removable.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Hydraulic spool valves required: 1 x pressure flow, 1 x pressure less return flow (max. counter-pressure < 20 bar).
Hydraulic hoses without couplings.
Height Adjustable support wheels, 360 deg swivel in front of flail
Options:
Mounting plate for yard loaders (linkage parts to loader not included)
Mounting plate for yard loader Avant
Mounting plate for yard loader with EURO-3-socket
Mounting plate for yard loader Schaffer with old socket
Mounting plate for yard loader Schaffer with socket SWH
Mounting plate for yard Weidemann with hydraulic locking
Mounting plate with hydraulic side shift 700mm to the right not for a specific vehicle
Screw on socket for Avant, only in combination with MU-FMZ072
Screw on socket for EURO 3, only in combination with MU-FMZ072
Screw on socket for Schaffer old socket, only in combination with MU-FMZ072
Screw on socket for Schaffer SWH, only in combination with MU-FMZ072
Screw on socket for Weidemann with hydraulic locking, only in combination with MU-FMZ072
Hydraulic Comtrol Spool (for oil flow over 48L/Min) Headstock with A frame Cat. 0
Headstock with A triangle Cat. 1 N
Second Patented removable shredding bar system: "Shark Fin"
Hood wear plate (factory mounted)
Thatch blades
Vertically adjustable rear support wheels, 360 deg swivelling, instead of support roller ( only MU-FM Hyrdo 140-160) additional charge
Models:
MU-FM 120-Hydro WW 1200mm Overall width 1450mm Oil-slow 35-70 l/min Weight 201kg Flails 20
MU-FM 140-Hydro WW 1400mm Overall width 1650mm Oil-slow 45-70 l/min Weight 217kg Flails 24
MU-FM 160-Hydro WW 1600mm Overall width 1850mm Oil-slow 45-70 l/min Weight 232kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING 140CM MULCHER WITH HYDRAULIC DRIVE - SUITS 35-70 LPM - MU-FM140

The heavy MU-H Vario series is the robust universal mulcher for green area maintenance for tractors and special system vehicles up to 90 hp.
This work horse for daily use in the widest possible range of mowing and mulching work has side shift, front and rear mounting, heavy fully proven universal M-Hammer flails and the patented "Shark fin" shredding bar system as standard.
Consequently this mulcher is not only capable of working perfectly on lawns, meadows and overgrown areas but also on fallow surfaces with woody growth and light scrub. The biomass is heavily shredded and spread evenly over the surface behind the roller.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat. I + II for Front or Rear mounting with mechanical side shift; MUL 180 280: 56 cm (as shown)
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar
System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards
Carbide wearing skids (removable)
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Hydraulic side shift (MU-H 220 Vario: 56cm)
Shock absorbing linkage springs (for front mount recommended)
MU-SOFA weight transfer system, recommended for font-mounted machines
Double free wheel gear box for PTO rotational direction
Modification of r.p.m/rotation direction
Rotor with triple Y-blades - additional charge
Rotor with triple M shackle flails - additional charge
Dust protection for front mounting MU-H 180 -220 Vario
Second patented removable shredding bar system: "Shark Fin"
Hood wearing plate (factory mounted)
Model:
MU-H 120 WW 1200mm Overall width 1370mm Max hp 90 Weight 380 kg Flails 10
MU-H 140 WW 1400mm Overall width 1570mm Max hp 90 Weight 400 kg Flails 12
MU-H 150 WW 1500mm Overall width 1670mm Max hp 90 Weight 415 kg Flails 12
MU-H 160 WW 1770mm Overall width 1770mm Max hp 90 Weight 430 kg Flails 14
MU-H 180 WW 1970mm Overall width 1970mm Max hp 90 Weight 530 kg Flails 16
MU-H 200 WW 2200mm Overall width 2370mm Max hp 90 Weight 505 kg Flails 18
MU-H 220 WW 2200mm Overall width 2370mm Max hp 90 Weight 575 kg Flails 18
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H VARIO 220 MULCHER (35-90HP) - REAR OR FRONT MOUNT

XLE Series Slasher. 2m, suits 60-100 HP - Australian Made
Specifications:
Working width: 2m (6'8")
Weight: 510kg
HP: 60-100
Finish: Galvanised Deck.
Features:
5mm galvanized deck.
Suits 60-100 HP tractors.
Cat I & II.
Adjustable skids.
Pivoting headstock with chain backstays.
PTO driveshaft.
Friction clutch.
Front and rear chain guards.
Gearbox available in red or yellow.
Optional Extras:
Wheelkit (adjustable)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP XLE SERIES SLASHERS 2M - SUIT 60-100HP

Large Profile Buckets (high volume/light materials).
Specifications:
- Width (m): 2.1m
- HP Range: 150+
- Struck Capacity (m3): 1.89
- Rated Capacity (m3): 2.18
- Dimensions LxWxH (mm): 2150x1338x1110
- Weight (kg): 512
Options:
- Forged or Profile Top Grab.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER LARGE PROFILE BUCKET (9900 SERIES) 2.1M - (150+ HP)

Galvanised AHS-STS Series Rotary Slasher. Side Throw Model. Available in AHS and ACS series Slashers.
Note: Picture shows painted model.
Features:
- 180cm cutting width
- 75HP gearbox
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- Lifting throw blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- Clean body design eliminates grass entrapment
- 6 series European driveshaft with integral clutch
- Single adjustable height control wheel
- Rubber guards front & rear.
Optional Extras:
- Chain guard front in lieu of rubber
- Chain guard rear in lieu of rubber
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM GALVANISED 180CM SIDE DISCHARGE ROTARY SLASHER (75HP) - AHS-STS SERIES

Burder Drag Scraper with Tilt & Dual Wheels.
Made in Australia.
Specifications:
HP: 50-80
Cutting Width: 2.44m
Capacity: 1.34m3
Approx. Weight: 594kg
Options:
- Rippers
- Laser Mounts
The Burder Drag Scrapers are great for touch up and limited land levelling. They work great for short haul projects, smoothing, and small jobs that do not justify the expense of an Ejection Scraper.
This Drag Scraper comes with a tilt feature, allowing you to cut ditches, or crown roads.
The Drag Scraper comes in 4 widths from 8ft (2.44m) to 14ft (4.27m). Whatever your scraping job, we have a scraper to fit your needs.
Rippers (scarifiers) are available for all our standard drag scrapers. These are good for scarifying and loosening in advance of levelling and planning and with the ripper assembly being hydraulically operated you are able control the depth up to 6 inches from the bottom of the scraper with ease.
The Burder Drag Scraper is the Perfect tool for:
- Road and driveway maintenance
- Site prep
- Pulling material out of buildings
- Snow removal
- Land levelling
Features:
- Reversible cutting edges.
- Swivel hitch.
- Large capacity box.
- Large end plates.
- Ripper options available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BURDER 8FT (50-80HP) DRAG SCRAPER WITH TILT & DUAL WHEELS

4 in 1 Bucket 2000 series - 1.35m
The 4 IN 1 bucket has many advantages over the standard bucket:
Features:
- Allows the operator to open the bucket to release material instead of dumping the material.
- When the bucket is opened, the exposed blades on the rear and front end of the bucket can be used for earthmoving activities.
- Allows the clamping of objects and is ideal for picking items like broken branches.
Specifications:
- Width (m): 1.35m
- HP Range: 15-24
- Struck Capacity (m3): 0.09
- Rated Capacity (m3): 0.11
- Dimensions LxWxH (mm): 1410X440X420
- Weight (kg): 90
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 4 IN 1 BUCKET 2000 SERIES 1.35M - 15-24 HP RANGE

Heavy duty hydraulic grader blade for tractors up to 130 hp. Ideal for general purpose grading, water table cutting, track earthworks and drain maintenance.
Features:
For tractors up to 130 hp
2700mm (9') wide
600kg
Reversible cutting edge
Full three way adjustment (manual or hydraulic)
Foot stand
Angle movement +/-44 degrees
Tilt movement +/- 26 degrees
Offset movement +/- 33 degrees
Adjustable turntable
Options:
Levelling wheel kit
Hydraulic levelling wheel
Adjustable rippers
Models:
Contractor 600-M (manual operation)
Contractor 600-1 (hydraulic - 1 ram)
Contractor 600-2 (hydraulic - 2 ram)
Contractor 600-3 (hydraulic - 3 ram)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARMGARD 2.7M (UP TO 130 HP) HYDRAULIC (1 RAM) CONTRACTOR GRADER BLADE

Find Machinery Attachments For Sale. Browse 1320 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS EHD210 SLASHERS 2.1M - 0097- 75+HP

DIGGA 325MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD - HYDRAULIC DRIVE

BURDER 4 IN 1 BUCKET 6000 SERIES 1.65M - 40-60 HP RANGE

SOUTHERN CROSS AG MACHINERY 7FT STICK RAKE, 42 TINES- 7LR - SUIT UP TO 90HP

MUTHING 140CM MULCHER WITH HYDRAULIC DRIVE - SUITS 35-70 LPM - MU-FM140

MUTHING MU-H VARIO 220 MULCHER (35-90HP) - REAR OR FRONT MOUNT

FIELDQUIP XLE SERIES SLASHERS 2M - SUIT 60-100HP

BURDER LARGE PROFILE BUCKET (9900 SERIES) 2.1M - (150+ HP)

AGRIFARM GALVANISED 180CM SIDE DISCHARGE ROTARY SLASHER (75HP) - AHS-STS SERIES

BURDER 8FT (50-80HP) DRAG SCRAPER WITH TILT & DUAL WHEELS

BURDER 4 IN 1 BUCKET 2000 SERIES 1.35M - 15-24 HP RANGE

FARMGARD 2.7M (UP TO 130 HP) HYDRAULIC (1 RAM) CONTRACTOR GRADER BLADE

Farm Supplies Machinery & Equipment

Dealer Address