Farm Supplies Machinery & Equipment

Heavy duty hydraulic grader blade for tractors up to 130 hp. Ideal for general purpose grading, water table cutting, track earthworks and drain maintenance.
Features:
For tractors up to 130 hp
2700mm (9') wide
600kg
Reversible cutting edge
Full three way adjustment (manual or hydraulic)
Foot stand
Angle movement +/-44 degrees
Tilt movement +/- 26 degrees
Offset movement +/- 33 degrees
Adjustable turntable
Options:
Levelling wheel kit
Hydraulic levelling wheel
Adjustable rippers
Models:
Contractor 600-M (manual operation)
Contractor 600-1 (hydraulic - 1 ram)
Contractor 600-2 (hydraulic - 2 ram)
Contractor 600-3 (hydraulic - 3 ram)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARMGARD 2.7M (UP TO 130 HP) MANUAL CONTRACTOR GRADER BLADE

Made in Australia
Features:
- Heavy duty load guard
- Easy hook up with no hinging tynes
- Adjustable latch locked tynes - fixed at top and bottom to prevent bouncing
- Notch positions for multiple tyne spacing's
- Lifting capacity = 1,800 kg
- Tyne size = 40 mm x 100 mm
- Tyne length = 1,070 mm
- Weight = 145 kg
Note: 3PL Pallet Forks come standard with bottom linkage pin set 100 mm above ground level
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC CAT II 3PL PALLET FORKS (1,800 KG)

Made in Australia
Features:
- Tynes angled at front edge allow larger volume to be collected, while reaching over debris piles, without disturbing the ground
- Max Opening 800 mm
- Dual independent grapples, cylinder covers
- Greasable pivot points
- 200 mm tyne spacing's
- Inc hoses, fittings & couplings
Dimensions:
Suits: 60 - 120 hp
Max Opening = 800 mm
Tyne Spacing's = 200 mm
Tyne Diameter = 12 mm
Max Width = 2,135 mm
Weight = 402 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH DOUBLE CLAW BUSH GRAPPLE (2,135 MM)

The Nobili RMS series mulchers are a heavy duty, robust machine ideal for mulching on wide areas. The RMS series is suitable for all broadacre stubble including rice, cotton, wheat and corn as well as pasture mulching applications.
Features:
Suggested Use: Grass or stubble and grass prunings up to 100mm in diameter for tractors up to 450HP.
Construction: High profile, adjustable tailboard and two mulching bars.
Control: Fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys. Dual drive with 5 rows of blades in special formation.
Attachment: Cat. III and IV quick hitch, three point linkage.
Height Control: Four rear wheels.
Specifications:
Connection Type: Linkage
Blades (Y with Straight): 144/72
PTO RPM: 1000
Working Width (mm): 6076
HP: 200-350
Product Weight (kg): 3650
Width / Height / Depth (mm): 6455 / 846 / 1600
NOTE: There is a surcharge for machinery assembly and blade changes (Excludes price of blades).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI RMS STUBBLE MULCHERS 6.07M - RMS610/012

The Auger Torque VM1000 perfect for excavators and skid steers and can cut up to 1m in width.
Suitable for excavators and skid steer loaders, these mulchers are capable of handling some of the toughest clearance applications as well as more precise hedge trimming, and a working width of up to 1m.
Making this mulcher unique is the option of different drums and the variety of easy to fix teeth. The fixed tungsten teeth drum gives a robust blunt cutting edge for thick timber, hedges and branches, the swinging hammer teeth gives a cleaner and more precise cut and level surface for hedges.
So, whatever the job at hand you can easily switch between the options, providing the ultimate solution for all your land clearing needs.
Specifications are shown in images.
Features:
- Working width options of 1m and 1.5m
- Suitable for excavators up to 15T and skid steer loaders
- Heavy duty drum assembly - easily swapped on-site
- Fixed tungsten tooth drum - mulch trees down to the ground
- Heavy duty hydraulic motor & steel construction
- Hinged debris cover for optimal mulching performance
- Replaceable skid plates for ground protection & drum storage
Fixed Tungsten teeth:
- The fixed solid steel teeth feature tungsten tips with a robust blunt cutting edge. The tungsten teeth are the toughest and most versatile option, grinding through the thickest solid timber up to several inches thick, but will also function on smaller lighter material like hedges and tree branches.
- For the heaviest duty jobs requiring completely clearing trees from an area or for mulching felled timber into chippings the fixed tooth is the best option.
Options:
- Drum assembly
- Push bar assembly
Mulcher wear parts:
- Fixed tungsten tooth
- Swinging hammer tooth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AUGER TORQUE 1M WIDTH SERIES 2 VARIABLE MULCHER WITH FIXED TUNGSTEN

Silvan 102 General Purpose Slasher - 1.5m (5ft)
Suit 30-40 HP. 102RS5
Ideally suited to clearing paddocks, fields and private roadsides where general cutting is required with a low HP tractor.
Features:
- Construction: 3mm top deck plate, downfolds front and rear, steel understructure.
- Gearbox: 40HP, 540RPM, 1:1.93 ratio.
- PTO Shaft Rating: 40HP, series 4 with integral clutch.
- Head Stock: Collapsible floating hitch.
- Clutch: Adjustable friction clutch with 2 x 150mm (6in) clutch plates.
- Finish: Premium quality powder coating.
- Skids: Adjustable from 50 90mm cutting height.
- Blades: 3 leaf rotor bar with hardened bushes and 2 Boron step down blades.
- Mounting: Cat I TPL attachment with offset or centre mount.
- Instructions: Operators manual and holder supplied.
- Safety Guards: Front & rear rubber guards.
Specifications:
- Market: Turf, Ag Lifestyle
- Connection Type: Linkage
- Min PTO HP: 30-40 HP
- Working Width (mm): 1500
- Product Weight (kg): 258
Options:
- Height Control Wheel
- Over-run Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 1.5M 102 GENERAL PURPOSE SLASHER (SUIT 30-40HP)

3.0m Silage Grab (16 tines in base). Made in New Zealand.
Rata Silage Grabs are a multi-task attachment built to perform on your Tractor front end loader, Telehandler (2.2m sizes or larger) or Skid Steer.
With the ability of a fork & the versatility of a grab, this attachment makes bulk silage and bale handling work easy.
Being manufactured from high tensile steel makes it the strongest Silage Grab of its type available on the Australian & New Zealand market.
Rata Silage Grabs are ideal for high volume silage handling. The Grab has been the popular choice on NZ farms for many years due to its high quality build & ability to secure large amounts of silage & leave the stack or pit face clean.
All Rata Silage Grabs feature powerful hydraulic rams that bite through any silage stack and securely clamp the feed, All grabs have x2 rams apart from the ASG120 (1.2m model) which has a single centre mounted ram.
Tines are high quality and manufactured from silicium spring steel by a renowned German manufacturer, these tines are also supported with tapered conus bushes that provide extra support when under load.
With a wide opening width of 1510mm this grab can easily handle large quantities of silage or large bales. The dimension is taken from the tip of the base tine directly to the tip of the top tine.
The pin geometry has been designed to provide maximum pressure possible at every point in the open and close arc. This makes it easier to use with high clamping pressure available at all times.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 3.0M SILAGE GRAB (ALSO SUITS TELEHANDLERS)

The Nobili rear mount BKE series of mulchers are a multi-purpose machine ideal for pasture topping with the option of side shift suited to tractors up to 100HP with cutting height maintained by adjustable skids.
Suggested Use: Grass mowing and green pruning's up to 50mm in diameter.
Construction: Low profile body, no opening tailboard.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced rotor.
Control: Two position fixed headstock.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Skids
Specifications:
Connection Type: Linkage
Tractor HP: 70-100 HP
PTO RPM: 540
Rotor RPM: 2205
Y Blades: 52
Working Width (mm): 2295
Weight (kg): 690
Dimensions WxHxD (mm): 2511W 550H 1222D
Options:
Full Width Roller
Wear Plate
Semi Swivel Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI BKE PASTURE MULCHERS 2.3M - BKE230/01-F, Y FLAILS, SUIT 70-100HP

Murray Series 62 - 7 Tine Chisel Plow complete (small frame).
Field proven through the toughest seasons
Machines are supplied with all components, including long shank tines, clamps, bottom linkage pins, clips and 75mm reversible points (Standard) etc, to fully complete the size specified.
Adjustable Tine Spacing (standard spacing 300mm) just move mount clamps and / or add additional Tine assemblies if required
Suitable for tractors fitted with Cat II three-point linkage systems. (Top link and pin NOT supplied).
Frame construction 100mm square RHS, underframe clearance 630mm (24), Rank spacing 760mm (30), optional depth control wheels 500mm 100mm approx. Tine steel shank size 75 25mm.
Power requirements; This depends very much on soil type, working depth and conditions; however, allow up to 8 kw (10 hp) (PTO) per tine. ie 9 tines = approx 72 kw (90 hp).
Specifications:
- Tine Spacing: 300mm
- Weight kg: 318
Options:
- One pair of depth control wheel assemblies.
- Recommended in most applications to avoid the Chisel Plow digging in.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 7 TINE RIGID CHISEL PLOW COMPLETE (SMALL FRAME)

Silvan 2.1m (7ft) Shireboss Slasher - Heavy Duty.
Min 75hp.
With reinforced sub frame and sides, Contracting and Shireboss slashers are used for clearing heavy scrub, creating firebreaks, roadsides, council contract work and where all types of cutting and clearing is required.
Features:
- Construction: 6mm top deck plate, rear corners tapered to improve manoeuvrability.
- Gearbox: 130HP, 540RPM, 1:1.93 ratio.
- PTO Shaft Rating: Shireboss: Blue torque 4 plate clutch 150HP.
- Head Stock: Collapsible floating hitch.
- Finish: Long lasting galvanized top deck.
- Skids: Adjustable from 40 140mm cutting height.
- Blades: 3 leaf (130mm) spring steel rotor bar with hardened bushes and 2 heavy duty, twist profile blades.
- Mounting: Cat. II TPL centre mount attachment.
- Instructions: Operators manual and holder supplied.
- Safety Guards: Replaceable front/rear quickfit chains.
Specifications:
- Connection Type: Linkage
- Min Tractor PTO HP: 75 HP
- Working Width (mm): 2,100
- Product Weight (kg): 790
- Height / Width (mm): 1,140 / 2270
Factory Options:
- Height Control Wheel (two recommended for 7ft model)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 2.1M 145 HEAVY DUTY SHIREBOSS SLASHER (MIN 75HP)

4 in 1 Bucket 8000 series - 2.10m. Includes Log Teeth as standard.
The 4 IN 1 bucket has many advantages over the standard bucket:
Features:
- Allows the operator to open the bucket to release material instead of dumping the material.
- When the bucket is opened, the exposed blades on the rear and front end of the bucket can be used for earthmoving activities.
- Allows the clamping of objects and is ideal for picking items like broken branches.
Specifications:
- Width (m): 2.10m
- HP Range: 50-100
- Struck Capacity (m3): 0.44
- Rated Capacity (m3): 0.55
- Dimensions LxWxH (mm): 2160 x 730 x 720
- Weight (kg): 450
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 4 IN 1 BUCKET 8000 SERIES 2.10M - 50-100HP RANGE

TRP-RT 120, 145, 175 mulchers are tractor-mounted machines to be fitted to the tractor three-point linkage. Ideal to collect, to shred and to store pruning of vineyards, orchards and olive groves.
Unique for the big-bags made of special transpiring material ensuring a natural mulched product drying. TRP-RT mulchers properly shred pruning residues aimed to be collected for energetic purposes.
TRP-RT range is equipped with a pick-up device - for pruning lifting - avoiding grass, stones and soil entering into the mulching chamber.
Specifications:
Tractor Connection: Linkage (Cat II, floating top link)
Connecting position: Rear
Engine speed rpm: 540 / 1000
Tractor horse power HP: 80-130, KW: 59-96
Working Width: 1450mm
Overall Width: 1450mm
Weight: 1200kg
Features:
Suggested Use: Mulcher suited to stony ground with pick up front for green pruning's to 100mm.
Construction: High profile, adjustable tailboard, two mulching bars and filter grid.
Control: Fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Skids.
Options:
- Hydraulic pickup
- Roller wheels (adds 200mm to overall width for TRP120/06 RT + TRP145/06 RT, adds 190mm to TRP175/06 RT)
- Front wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 1.4M TRP-RT MULCHER (SUIT 80-130HP)

Find Machinery Attachments For Sale. Browse 1344 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

FARMGARD 2.7M (UP TO 130 HP) MANUAL CONTRACTOR GRADER BLADE

HIMAC CAT II 3PL PALLET FORKS (1,800 KG)

HIMAC EURO HITCH DOUBLE CLAW BUSH GRAPPLE (2,135 MM)

NOBILI RMS STUBBLE MULCHERS 6.07M - RMS610/012

AUGER TORQUE 1M WIDTH SERIES 2 VARIABLE MULCHER WITH FIXED TUNGSTEN

SILVAN 1.5M 102 GENERAL PURPOSE SLASHER (SUIT 30-40HP)

RATA 3.0M SILAGE GRAB (ALSO SUITS TELEHANDLERS)

NOBILI BKE PASTURE MULCHERS 2.3M - BKE230/01-F, Y FLAILS, SUIT 70-100HP

MURRAY 7 TINE RIGID CHISEL PLOW COMPLETE (SMALL FRAME)

SILVAN 2.1M 145 HEAVY DUTY SHIREBOSS SLASHER (MIN 75HP)

BURDER 4 IN 1 BUCKET 8000 SERIES 2.10M - 50-100HP RANGE

NOBILI 1.4M TRP-RT MULCHER (SUIT 80-130HP)

Farm Supplies Machinery & Equipment

Dealer Address