Farm Supplies Machinery & Equipment

600mm RC4 Series Auger (Earth/Rock combo - Tapered Teeth) up to 5T for Ramdrill PTO - Hydraulic downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
RC4 earth/rock
Digga's RC4 Augers come with tapered tungsten TAPERLOC teeth, which are designed for drilling in earth, shale, asphalt, permafrost and fracturable rock.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: Combo Earth & Rock
- Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TT
- Pilot: PM-HX-3
- Ideal Drives: PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: not recommended
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 600MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL PTO -HYDRAULIC DOWNFORCE

This range of mulcher is ideal for all mowing and mulching with small and compact tractors of 12 to 35 hp from cutting fine lawns to high grass or light vegetation.
The MU-C mulchers display their overall versatility, their good cutting and mulching quality and their robust construction.
Features:
Manufactured from High Quality QSt/E Steel with centre mounted Cat. I Headstock for rear mounting.
Rear mounting: Gearbox with integrated over run clutch for 540 / 1000 r.p.m. (distance of the ground to P.T.O. shaft cc. 50 cm).
Front mounting: Low positioned gearbox with integrated over run clutch for 1000 r.p.m. (2000 r.p.m. possible as option) (distance of the ground to P.T.O.shaft cc. 25 cm).
Belt protection with tension measuring slot.
Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles; bearings protected against dirt, wear and tear.
Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment.
High tempered spring steel one way protection flaps in front of the mower hood.
Skids
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards.
Options:
2 point Linkage parts to original mower deck linkages for Front Mowers (Iseki SF 230 etc.) instead of Head Stock Cat.I (only for MU-C 100 and MU-C 120 available).
Special Carbide wearing skids, removable (Rear mounting only).
Height adjustable rubber wheels, 360º swivel in front of the mulcher.
Hydraulic Weight Transfer MU-SOFA, for Front mounting recommended.
Mount for municipal quick-coupling triangle (installed on implement) for front mounting.
3-point trestle (Cat 1) Alpine for converting rear-mounted MU-C to front mounting for carrier vehicles, 540 rpm or 1000 rpm (MU-C 140-160)
Linkage parts for Shibaura CM 214
Modification to different RPM
Second screw-type short chopping bar system with "shark fin" design-a Muthing patent (only for front mounting)
Hood wear plate (factory mounted)
Models:
MU-C080 WW-800mm Overall width-970mm Max hp-35 Weight 140kg Flails 12
MU-C100 WW-1000mm Overall width-1170mm Max hp-35 Weight 160kg Flails 16
MU-C120 WW-1200mm Overall width-1370mm Max hp-35 Weight 180kg Flails 20
MU-C140 WW-1400mm Overall width-1570mm Max hp-35 Weight 200kg Flails 24
MU-C160 WW-1600mm Overall width-1770mm Max hp-35 Weight 220kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING 80CM MULCHER SUITS UP TO 35HP MU-C080

Log Grabs to suit pallet Forks - Requires front remotes.

Specifications:

- Minimum diameter: 380
- Capacity: Thumb grab only
- Dimensions LxWxH (mm):1450x600x1030
- Weight (kg): 70+

BURDER LOG GRABS TO SUIT PALLET FORKS - THUMB GRAB ONLY

The heavy MU-H Vario series is the robust universal mulcher for green area maintenance for tractors and special system vehicles up to 90 hp.
This work horse for daily use in the widest possible range of mowing and mulching work has side shift, front and rear mounting, heavy fully proven universal M-Hammer flails and the patented "Shark fin" shredding bar system as standard.
Consequently this mulcher is not only capable of working perfectly on lawns, meadows and overgrown areas but also on fallow surfaces with woody growth and light scrub. The biomass is heavily shredded and spread evenly over the surface behind the roller.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat. I + II for Front or Rear mounting with mechanical side shift; MUL 180 280: 56 cm (as shown)
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar
System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards
Carbide wearing skids (removable)
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Hydraulic side shift (MU-H 220 Vario: 56cm)
Shock absorbing linkage springs (for front mount recommended)
MU-SOFA weight transfer system, recommended for font-mounted machines
Double free wheel gear box for PTO rotational direction
Modification of r.p.m/rotation direction
Rotor with triple Y-blades - additional charge
Rotor with triple M shackle flails - additional charge
Dust protection for front mounting MU-H 180 -220 Vario
Second patented removable shredding bar system: "Shark Fin"
Hood wearing plate (factory mounted)
Model:
MU-H 120 WW 1200mm Overall width 1370mm Max hp 90 Weight 380 kg Flails 10
MU-H 140 WW 1400mm Overall width 1570mm Max hp 90 Weight 400 kg Flails 12
MU-H 150 WW 1500mm Overall width 1670mm Max hp 90 Weight 415 kg Flails 12
MU-H 160 WW 1770mm Overall width 1770mm Max hp 90 Weight 430 kg Flails 14
MU-H 180 WW 1970mm Overall width 1970mm Max hp 90 Weight 530 kg Flails 16
MU-H 200 WW 2200mm Overall width 2370mm Max hp 90 Weight 505 kg Flails 18
MU-H 220 WW 2200mm Overall width 2370mm Max hp 90 Weight 575 kg Flails 18
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H VARIO 120 MULCHER (35-90HP) REAR OR FRONT MOUNT

This heavy professional range for tractors of up to 150 hp with side shift and front or rear mounting is the entry level to the top range of Müthing mulchers along with super heavy professional equipment covers performance ranges of tractors of more than 400 hp.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-M Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with heavy duty multi position Headstock Cat.
II for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Gearbox with integrated over run clutch and through drive for 1000 r.p.m.
Automatic belt tensioning.
High tempered M Hammer flails with self sharpening cutting edge to ensure a clean cut and maximum shredding using less power.
Spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Large self-cleaning roller to carry the flail mower, adjustable for different heights.
Wearing skids.
Stand.
P.T.O. shaft and guarding to ISO Standards.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut..
Purposely designed hood in conjunction with high rotor and cutting speeds and a fixed shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Shock Absorbing Linkage Springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Heavier PTO shaft with hardened inner pipe and cap bottom lubrication - additional charge.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Scraperhood inclusive bleed for displaced roller towards the back, starting from model 2016.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wearing Plate (Factory Mounted).
Model:
MU-M 220 2200mm 150 HP WW 2200mm Overall width 2400mm Weight 840kg Flails 18
MU-M 250 2500mm 150HP WW 2500mm Overall width 2700mm Weight 900kg Flails 22
MU-M 280 2800mm 150HP WW 2800mm Overall width 3000mm Weight 970kg Flails 24
MU-M 300 3000mm 150HP WW 3000mm Overall width 3200mm Weight 1100kg Flails 26
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-M 300 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

This heavy duty professional range for tractors of up to 220hp with side shift and front or rear mounting is the entry to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-PRO Vario are required.
Features:
Manufactured from High Quality QST/E Steel with multi position headstock Cat. II + III for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Heavy duty gearbox with integrated over run clutch and through drive for 1.000 RPM.
Automatic belt tensioning.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear. Patented removable shredding bar System: Shark fin.
Large pivoting rear support roller for depositing mulch material either behind or in front of the roller, adjustable to different heights, with Roller Bearing by Starinth.
Side, wearing skids.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Support leg.
Slotted holes in the lower link receiver for perfect contour following and an even quality cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Heavy duty PTO shaft with hardened inner pipe and cap bottom lubrication.
Adjustable Vario cutting bar for adjusting the shredding rate.
Hood Wear Plate (Factory Mounted).
Options:
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Hydraulic adjustment of cutting bar.
Scraper bar for displaced support roller MU-PRO Vario.
Second Patented removable shredding bar system: "Shark Fin".
Model:
MU-PRO 250 2500mm 220 HP WW 2500mm Overall width 2700mm Weight 1330kg Flails 22
MU-PRO 280 2800mm 220HP WW 2800mm Overall width 3000mm Weight 1400kg Flails 24
MU-PRO 300 3000mm 220HP WW 3000mm Overall width 3200mm Weight 1460kg Flails 26
MU-PRO 320 3200mm 220HP WW 3200mm Overall width 3400mm Weight 1500kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-PRO 300 MULCHER INC HYDRAULIC SIDE SHIFT

500mm TP series Tree Planting Auger (soft earth) up to 5T for Ramdrill PHD - Hydraulic Drive.
Price inclusions: Tree Auger, pilot, pin and clip.
TP - Tree planter
Designed to drill a smaller diameter hole for the tap root and a larger secondary hole at the top for the root ball.
The design of the Tree Planter cutting system will leave the hole walls rough and not glazed, meaning the plant stock has the maximum chance of establishing.
The angle and geometry of the teeth to the pilot
is the key to the efficiency in which these augers
perform.
Available for drilling in earth (TS tooth
style), providing longer wear life and greater
cutting performance. Not suited for rock.
Features:
- Designed to easily dig and place trees and shrubs of all sizes
- Cutting system designed to prevent root binding
- Improves plant establishment
- Adaptors & extensions to maximise drilling depth
- Robust Auger body construction for long life
- Heavy duty tu7be with highest grade steel
- Replaceable wear parts
- Quality Australian made
Specifications:
- Drilling Conditions: soft earth
- Standard Hub: 50.8mm Round
- Hub Options: 50.8mm Hex, 65mm Round, 57mm Square
- Overall Length: 1200 mm
- Flights (Lead): 6 mm
- Flights (Carry): 6 mm
- Teeth: TS
- Pilot: PS
- Ideal Drives: PDD-PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay:45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N/A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 500MM TREE PLANTING AUGER FOR RAMDRILL - HYDRAULIC DRIVE

The carryall really does do what it says it carries all!
Farm Aid carryalls are entirely Australian products Designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction, they are built to serve and built to last.
FA503: 4 x 3 with Dressed Hardwood Floor (85kg)
Options:
Collapsible headstock option available enquire today.
Our carryalls are also available in other configurations and can be made to specification.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FARM-AID 4FT CARRYALL WITH HARDWOOD FLOOR - 4FT X 3FT - FA503

250mm - 1 Series Auger for Post Hole Borer.
Standard conditions - Tungsten Carbide.
A1 soft earth
Bladed teeth for soft earth/clay.
Earth Auger for general purpose drilling.
Designed to reduce auger jam, the A1 auger features its cutters on one side as well as a restrictor plate to reduce overrun.
Available in earth or tungsten carbide (TC), providing longer wear life and greater cutting performance. Not suited for rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
Specifications:
- Drilling Conditions: Soft earth
- Hub: Stihl One man Style 25mm Round
- Overall Length: 960mm
- Flights (Lead): 6mm
- Flights (Carry): 6mm
- Teeth: TS
- Pilot: PS
- Ideal Drives: One man borer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 250MM AUGER (STANDARD - TUNGSTEN CARBIDE) FOR 1 MAN BORER

Painted AES/120 Slasher - suitable for pasture slashing and light to medium regrowth.
Features:
- 120cm /48 inch cutting width
- 40 HP gearbox
- Cat '1' (AES) clevis hitch 3 point linkage
- 4 series drive shaft with friction clutch.
- Laminated Bisalloy blade beam with offset suction lift blades for clean cutting.
- Adjustable side skids built-in blade trim.
- Body reinforcement layout eliminates entrapment of swath or water.
Optional extras:
- Slasher galvanised (4WAES120-G)
- Chain top link
- Chain guard front in lieu of rubber
- Chain guard rear in lieu of rubber
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM PAINTED 120CM ROTARY SLASHER (40HP) - AES SERIES

Stone Bucket 3000 series -1.35m.

The stone bucket is designed for picking up stones and other debris. 

The 105mm spacing from tine to tine allows dirt to fall through while retaining the collected stones and debris. 

The stone bucket is a useful implement for the landscaping and agriculture industry.

Specifications:

- Width (m): 1.35m 	
- HP Range: 20-45	
- Struck Capacity (m3): 0.23
- Rated Capacity (m3): 0.25
- Dimensions LxWxH (mm): 1400X900X600
- Weight (kg): 135

BURDER STONE BUCKET 3000 SERIES 1.35M - 20-45 HP RANGE

By using the MU-H/S rear and side mounted mulcher you can turn your tractor into a universal mower for verges, embankments and ditches with working widths of up to 4.00 m.
To do this you only need 2 double acting hydraulic valves on your tractor, one of which should have a floating position.
The patented safety breakaway system of the MU-H/S via a mechanical arm is the active collision protection for both tractor and mulcher.
This allows the mulcher to permanently reduce its load upwards, thus reducing the forces bearing on the lower link and the device.
Features:
Manufactured from High Quality QSt/E Steel with Headstock Cat. II for Rear mounting.
Hydraulic parallelogram side shift.
Patented Safety Mechanical Break Away System.
Working angle 90° up to 60° down.
Gearbox with integrated over run clutch for 540 r.p.m.
Belt protection with tension measuring slot.
Hydraulic transport safety lock at an angle of 90° with shut-off tap, (2 double acting spool valves required, at least one with floating position).
Stand.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights.
Wearing skids.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark Fin spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
P.T.O. shaft and Guarding to ISO Standards.
Carbide Wearing Skids (removable).
Adjustable Vario cutting bar for adjusting the shredding rate.
Options:
Electro-Hydraulic 6/2 distributer with handle and feeler (1 double acting spool valve with floating position required).
Rotor with triple Y-blades (additional charge).
Rotor with M shackle flails (additional charge) (please state exact working width).
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Model:
MU-H/S 140 1400mm 90 HP WW 1400mm Weight 640kg Flails 12
MU-H/S 160 1600mm 90 HP WW 1600mm Weight 670kg Flails 14
MU-H/S 180 1800mm 90 HP WW 1800mm Weight 705kg Flails 16
MU-H/S 200 2000mm 90 HP WW 2000mm Weight 735kg Flails 16
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H/S 200 REAR & SIDE MULTI PURPOSE FLAIL MOWER

Find Machinery Attachments For Sale. Browse 1375 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

DIGGA 600MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL PTO -HYDRAULIC DOWNFORCE

MUTHING 80CM MULCHER SUITS UP TO 35HP MU-C080

BURDER LOG GRABS TO SUIT PALLET FORKS - THUMB GRAB ONLY

MUTHING MU-H VARIO 120 MULCHER (35-90HP) REAR OR FRONT MOUNT

MUTHING MU-M 300 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

MUTHING MU-PRO 300 MULCHER INC HYDRAULIC SIDE SHIFT

DIGGA 500MM TREE PLANTING AUGER FOR RAMDRILL - HYDRAULIC DRIVE

FARM-AID 4FT CARRYALL WITH HARDWOOD FLOOR - 4FT X 3FT - FA503

DIGGA 250MM AUGER (STANDARD - TUNGSTEN CARBIDE) FOR 1 MAN BORER

AGRIFARM PAINTED 120CM ROTARY SLASHER (40HP) - AES SERIES

BURDER STONE BUCKET 3000 SERIES 1.35M - 20-45 HP RANGE

MUTHING MU-H/S 200 REAR & SIDE MULTI PURPOSE FLAIL MOWER

Farm Supplies Machinery & Equipment

Dealer Address