Farm Supplies Machinery & Equipment

Silvan 102 General Purpose Slasher - 1.2m (4ft)
Suits 20-40 HP.
Ideally suited to clearing paddocks, fields and private roadsides where general cutting is required with a low HP tractor.
Specifications:
- Market: Turf, Ag Lifestyle
- Connection Type: Linkage
- Min PTO HP: 20-40 HP
- Working Width (mm): 1,200
- Product Weight (kg): 181
Features:
- Construction: 3mm top deck plate, downfolds front and rear, steel understructure.
- Gearbox: 40HP, 540RPM, 1:1.93 ratio.
- PTO Shaft Rating: 40HP, series 4 with integral clutch.
- Head Stock: Collapsible floating hitch.
- Clutch: Adjustable friction clutch with 2 x 150mm (6in) clutch plates.
- Finish: Premium quality powder coating.
- Skids: Adjustable from 50 90mm cutting height.
- Blades: 3 leaf rotor bar with hardened bushes and 2 Boron step down blades.
- Mounting: Cat I TPL attachment with offset or centre mount.
- Instructions: Operators manual and holder supplied.
- Safety Guards: Front & rear rubber guards.
Options Available:
- Height Control Wheel
- Over-run Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1.2M 102 GENERAL PURPOSE SLASHER (SUIT 20-40HP)

Medium duty left hand offset verge mulcher, for tractors 55 to 110hp. Ideal for general mowing and mulching on verges, banks and roadsides.
Specifications:
Actual Width: 270cm
Working Width: 250cm
Required HP: 85hp
Weight: 915kg
No of Blades: 22
Features:
110hp rated gearbox
Left hand offset
540rpm PTO (2278rpm-tip speed 52.5m/s)
4 belt transmission
Category 2 linkage
Shock absorber with pressure relief valve fitting onto side-shift arm
Front and upper counter knives
Rear roller
Side-shift & tilt (angle) adjustment by hydraulic rams
Gearbox with freewheel safety device
Side skids
Hammer flails
Double skinned chassis
Wide angle driveshaft
Models:
PEGASUS 175 175cm Working width 55hp 780kg 16 Blades
PEGASUS 200 200cm Working width 65hp 810kg 18 Blades
PEGASUS 225 225cm Working width 75hp 860kg 20 Blades
PEGASUS 250 250cm Working width 85hp 915kg 22 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.5M (85HP) PEGASUS SWING ARM SIDE MULCHER

Key Features:
- Cutting Width: 6.2m
- Transport Width: 2.8m
- Five rotors with 30 heavy-duty blades
- 250hp input gearbox
- Slip clutch protection
- Hydragas suspension with walking axle
- 7-year gearbox warranty
The Multicut 650 is boosted with additional output capability, enabling the comfortable clearance of more than 8 hectares per hour. A walking axle design is standard across the full width of the machine delivering exceptional ground contour following and reduced shock loading in harsh field conditions. Wider wheels are also fitted to add additional comfort and improved performance.
Renowned durability is built into this mower and the evenness of spread from the five rotors is unrivalled leaving a clean finish and high output unmatched by competitive three rotor machines of the same width. With a six gearbox driveline, each with slip clutch protection, the power is evenly spread to deliver exceptional reliability and durability whilst allowing enhanced forward speeds and fuel efficiency.
Features:
- Reinforced mega strength deck structure
- Built in shock absorbs
- LED light kit
- Full width walking axle
- Full width front & rear safety chains
- Heavy duty industrial tyres (wide)
- Premium long life shaft drive
- Universal drawbar for high or low towing
- Adjustable levelling tie bars
- Hydraulic wing lift and support
- Mechanical wing float support
- Full length side skids
- Slip clutch protection
- 111 HP rotor box
- Anti-scalp disc
- Heavy duty winged up draught blades
- 250 HP splitter box
- Integrated seal protector
- Includes carrier & hardware for easy fitting of starcut
Specifications:
Machine weight (with front and rear single chain guards): 2,850kg / 6,283lbs
Hitch: Multi-positional drawbar
Cutting width: 6.28m / 247"
Working machine width: 6.47m / 255"
Transport machine width: 2.70m / 106"
Maximum working length: 5.07m / 200"
Transport length: 4.93m / 194"
Deck height (underside of deck to skid): 0.23m / 9"
Transport height: 2.90m / 115"
Cutting height: 25mm - 210mm (1" - 8 1/4")
Cutting capacity: 100mm / 4"
Recommended tractor hp: 90hp / 67kW
Wing working angles: 45 degrees up / 15 degrees down
Power take-off speed: 1,000rpm
Gearbox (splitter): Cast iron housing
Gearbox (rotor gearboxes (x5)): Cast iron housing
Input shaft: 1" 3/8 Z21 or Z6 SFT 8 tractor end
Gearbox oil capacity (splitter gearbox): 2.7L / 4.7 pints
Gearbox oil capacity (centre + inner rotor gearboxes (x3)): 2.1L / 3.7 pints
Gearbox oil capacity (outer rotor gearboxes (x2)): 1.3L / 2.3 pints
Deck construction: All welded construction
Deck material thickness: 6mm (1/4")
Side skirt material thickness: 5mm (3/16")
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish (outer wing rotors): 5mm (3/16") round pan with blade holder bar
Blades (x15): 12mm (1/2") 30 carbon boron hardened and tempered. Free swinging high lift - low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed (1,000rpm): 79mps / 15551fpm
Driveline: ASAE Category 6
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x8): 21x9 14 PLY optional wider pneumatic tyre with steel hub
Front guard: Single chain guards on each deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

The Nobili VKD series mulchers are a medium duty, multi-purpose machine ideal for vineyard and orchard mulching, and for road side mulching by councils.
An adjustable tailboard is fitted for maintenance. A finer mulch is produced with two mulching bars, a restrictor bar and rakes. The VKD has side shift to the right with optional hydraulic side shift and height control is by an adjustable full width roller.
Features:
Suggested Use: Grass and green pruning's up to 80mm diameter.
Construction: Low profile body, adjustable tailboard, two mulching bars and one restrictor bar.
Control: Manual side shift with optional hydraulic side shift.
Drive Line: PTO drive shaft with durable safety cover, heavy duty gearbox fitted with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. I and II three point linkage, floating top link.
Height Control: Roller (standard fitment).
Specifications:
Connection Type: Linkage
Blades (Cast Hammers): 18
Tractor HP: 60-100 HP
Working Width (mm): 1718
Product Weight (kg): 560
Width / Depth / Height (mm): 1852 / 1075 / 510
Options:
Hydraulic Side Shift
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI 1.7M VKD ORCHARD MULCHER (60-100HP)

Heavy duty hydraulic folding mulcher suitable for tractors from 100-180 hp. Universal 10mm Y-shaped flails ideal for straw, grass, beet leaves and set aside areas.
Specifications:
Actual Width: 433cm
Working Width: 404cm
Required HP: 100-180hp
Weight: 2296kg
No of Blades: 88 Y shaped flails
Features:
180hp rated gearbox (Scorpio/P)
220 hp rated gearbox (Super Scorpio/P)
Integrated over-run clutch
Floating from linkage (cat 2)
Fixed front counter blades
Replaceable upper counter blades
Double skinned chassis
Side skids
4 x 4 belt side transmission
Opening rear doors
1000 rpm PTO
Front protection flaps
10mm Y-shaped flails with straight flail
Rear lights for road transport
Parking support
Options in lieu of standard:
Spreading fins (each) (400 = 12, 450 = 14, 500 = 16, 560 = 20, 640 = 24)
Rear wheel kit
Rear roller (Scorpio/P400 - P500)
Rear roller (Super Scorpio/P560)
Rear roller (Super Scorpio/P620)
Hydraulic door opening
Hammer flails in lieu "Y" flails (Scorpio)
Hammer flails in lieu "Y" flails (Super Scorpio)
Disc kit
Models:
SCORPIO/P 400 404cm Working width 100-180hp 2296kg 88 Blades
SCORPIO/P 450 454cm Working width 120-180hp 2410kg 96 Blades
SCORPIO/P 500 504cm Working width 140-180hp 2524kg 112 Blades
SUPER SCORPIO/P 564cm Working width 160-220hp 3300kg 128 Blades
SUPER SCORPIO/P 644cm Working width 180-220hp 3771kg 144 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 4.04M (100-180HP) SCORPIO/P 400 GENERAL PURPOSE MULCHER

250MM 4 Series auger (Standard conditions- Tungsten Carbide) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 250MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

500MM RC4 Series Auger (Earth/Rock combo - Tapered Teeth) up to 5T for Ramdrill PHD - Hydraulic drive.
Price inclusions: Auger, teeth, pilot, pin and clip.
RC4 earth/rock
Digga's RC4 Augers come with tapered tungsten TAPERLOC teeth, which are designed for drilling in earth, shale, asphalt, permafrost and fracturable rock.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: Combo Earth & Rock
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TT
- Pilot: PM-HX-3
- Ideal Drives: PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: not recommended
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 500MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL - HYDRAULIC DRIVE

5ft Stick Rake recommended for tractors less than 90HP.
Ideal for light grading, levelling, and general raking of sticks, leaves and stones.
Great for fire hazard reduction.
Includes 30 spring steel tines, rake rotates 360 degrees allowing for angular and reverse settings.
Heat treated and 5/16 x 1 spring steel tines.
Also available in sizes...
4ft stick rake
6ft stick rake
7ft stick rake
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 5FT STICK RAKE, 30 TINES- 5LR - SUIT UP TO 90HP

1.5m Funnel Bucket - Made in New Zealand.
Width 1.5 (m)
Capacity 750 (L)
Capacity 0.75 (m³)
Tare Weight 410 (Kg)
Includes Hydraulic Shutter
Optional - Bolt on Front Skirt
Rata Funnel Buckets feature a fully hydraulic actuation system powered by the Loader or Telehandlers 3rd service.
This enables you to load & discharge the material without having to leave the Tractor or Telehandlers cab.
Cutting edges on the Funnel Bucket are made of high tensile wear resistant steel to ensure a long abrasion resistant life.
The buckets side edges & base also feature 10mm wear strips to prevent wear to the 6mm bucket skin itself.
These buckets feature an overall heavy duty build to cope with heavy loads & demanding conditions. Gusseting around hitch areas helps to disperse stress across a greater portion of the bucket back frame.
A flexible canvas chute ensures material is dispensed accurately with minimum spillage or waste. The chute is 400 x 400 for fast unload times when the shutter is fully open.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 1.5M FUNNEL BUCKET (750L) WITH HYDRAULIC SHUTTER

The Nobili BV PRO series mulchers are a heavy duty multi-purpose machine used for road side mulching by councils and ideal for orchard use.
A double skin improves durability and height control is adjustable with a full width roller with removable ends. Two mulching bars and a restrictor bar are fitted to produce a finer mulch.
The BV PRO has side shift to the right with a hydraulic side shift option.
Features:
Suggested Use: Grass and green pruning's up to 100mm diameter.
Construction: Low profile body, double skin, two mulching bars and one restrictor bar.
Control: Manual side shift with optional hydraulic side shift.
Drive Line: PTO drive shaft with durable safety cover, heavy duty gearbox fitted with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. I and II three point linkage, floating top link.
Height Control: Roller (standard fitment).
Specifications:
Connection Type: Linkage
Blades: 24 Cast Hammers
Min PTO HP: 85-130 HP
Working Width (mm): 2331
Overall Width (mm): 2550
Product Weight (kg): 1,140
Options:
Hydraulic Side Shift
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI BV PRO ORCHARD MULCHERS 2.3M - BV2400/06, 85 - 130HP

One of the strongest mechanical grader blades on the market.
You cannot buy better value
Features:
Fitted with high tensile 66mm main pivot pin.
Main and tilt pivots sleeved and grease-able for ease of operation, strength and reduced wear.
Extensive use of high tensile steels for extra strength in high stress areas.
24 angle positions with adjustment from tractor seat.
Offset 3 positions to both right and left allowing blade to work outside the wheel even at an angle.
Blade rotates 360 degrees for forwards and backwards operation.
Easy to adjust ratchet tilt function as standard.
By having the tilt function below the turntable, the tilt angle is allowed to remain constant even when fully offset and ensures no decrease in tilting angle if the blade is offset.
Optional hydraulic available.
Curved 10mm mouldboard for strong cuts at the correct angle and high clearance for greater capacity.
Optional Holden depth wheel with either manual ratchet or hydraulic adjustment.
Hardened reversible cutting edge.
Over 400kg weight.
Available in 7ft (2.1m) and 8ft (2.4m) widths.
Suitable for tractors 60-120 HP.
Also Available:
0039 7ft Grader Blade Extra Heavy Model
Options:
0041 EH Hydraulic tilt option in lieu of ratchet
0042 EH Hydraulic tilt option as spare part
0026 Wheel kit suit Hyd/EH/HD G.Blade, Manual ratchet link
0027 Wheel kit suit Hyd/EH/HD G.Blade, Hydraulic c/w Rams & Hoses
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS EXTRA HEAVY DUTY GRADER BLADE 8FT (2.4M) - 0040, SUIT 60-120HP

This heavy duty professional range for tractors of up to 120 hp with side shift and front (or rear) mounting is the entry level to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-L Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat.
I + II for Front or Rear mounting with mechanical side shift;
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar.
System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standard
Carbide wearing skids (removable).
Adjustable Vario Intake Bar - cutting bar.
Options:
Hydraulic side shift (56cm lifting range).
Shock absorbing linkage springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modifications of r.p.m /rotation direction.
Rotor with triple Y-blades (additional charge).
Rotor with m shackle flails (additional charge).
Scraper bar for displaced support roller MU-L Vario.
Second Patented removable shredding bar system "Shark Fin".
Hood wear plate (Factory mounted).
Model:
MU-L 180 1800mm 120 HP WW 1800mm Overall width 1970mm Weight 530kg Flails 16
MU-L 200 2000mm 120 HP WW 2000mm Overall width 2170mm Weight 570kg Flails 16
MU-L 220 2200mm 120 HP WW 2200mm Overall width 2370mm Weight 610kg Flails 18
MU-L 250 2500mm 120 HP WW 2500mm Overall width 2670mm Weight 670kg Flails 22
MU-L 280 2800mm 120 HP WW 2800mm Overall width 2970mm Weight 790kg Flails 24
As shown in illustration - MUL 180 280: 56 cm.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-L VARIO 250 MULCHER - SUITS 45-120HP (FRONT OR REAR MOUNT)

Find Machinery Attachments For Sale. Browse 1320 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 1.2M 102 GENERAL PURPOSE SLASHER (SUIT 20-40HP)

CELLI 2.5M (85HP) PEGASUS SWING ARM SIDE MULCHER

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

NOBILI 1.7M VKD ORCHARD MULCHER (60-100HP)

CELLI 4.04M (100-180HP) SCORPIO/P 400 GENERAL PURPOSE MULCHER

DIGGA 250MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

DIGGA 500MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL - HYDRAULIC DRIVE

SOUTHERN CROSS AG MACHINERY 5FT STICK RAKE, 30 TINES- 5LR - SUIT UP TO 90HP

RATA 1.5M FUNNEL BUCKET (750L) WITH HYDRAULIC SHUTTER

NOBILI BV PRO ORCHARD MULCHERS 2.3M - BV2400/06, 85 - 130HP

JOHN BERENDS EXTRA HEAVY DUTY GRADER BLADE 8FT (2.4M) - 0040, SUIT 60-120HP

MUTHING MU-L VARIO 250 MULCHER - SUITS 45-120HP (FRONT OR REAR MOUNT)

Farm Supplies Machinery & Equipment

Dealer Address