Farm Supplies Machinery & Equipment

Heavy duty fixed mulcher, for tractors from 60-90hp. Ideal for mowing grass and mulching pruning's up to 70mm in diameter (Vineyards and Orchards etc).
Specifications:
Actual Width: 193cm
Working Width: 175cm
Required HP: 60-90hp
Weight: 515kg
No of Blades: 16
Features:
90hp Rated gearbox
Integrated over-run clutch
2 Internal counter combs
Double skinned chassis
Adjustable rear roller for cutting height
Side skids
4 Belt side transmission
2 position headstock for offset or centre mount operation
540rpm PTO
Front protection flaps
Flat hammer flails
Parking support
Options In Lieu of Standard:
Rear collection spikes (each) (150 = 11, 175 = 13, 200 = 15, 225 = 17, 250 = 19)
Opening rear door
Set of steering wheels in lieu of roller
Y flails in lieu of hammer flails
Models:
MIZAR/F 150 150cm Working Width 50-90hp 490kg 14 Blades
MIZAR/F 175 175cm Working Width 60-90hp 515kg 16 Blades
MIZAR/F 200 200cm Working Width 65-90hp 600kg 18 Blades
MIZAR/F 225 225cm Working Width 70-90hp 650kg 20 Blades
MIZAR/F 250 250cm Working Width 75-90hp 700kg 22 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.75M (90HP GEARBOX) MIZAR/F LOW BODY MULCHER

A rugged, extra tough slasher built to take real punishment from continuous work ideal for contractors.
Features:
Extra strong build 6mm top plate with exceptionally strong perimeter and centre tubular crossmembers where it counts.
Adjustable skids. Contractor option fitted with additional runner for wear.
Two-pack paint finish. Contractor option has hot dipped galvanised body.
Headstock made from heavy angle and RHS and fitted with floating (toggle) top link. Optional chain stays available.
Bondioli & Pavesi (Italian) Series 8 pto driveshaft with integrated 4 plate slip clutch protects slasher and tractor. An integrated clutch means less wear between the clutch and pto shaft.
110 HP oil lubricated Italian Comer gearbox with 1:1.5 ratio and excellent seal protection with 5 Year Manufacturers Warranty.
Straight reversible 100 x 12mm Boron slasher blades are standard with stepped configuration as an option. All bushes are through hardened. Made in Australia, the blades are hardened and tempered in the 40-45 Rockwell range. This range gives excellent hardness while delivering strength and fatigue resistance. Any harder and they potentially become brittle.
Hardened and tempered spring steel rotor blade assembly. Bolt head protection on contractor option allows easy changeover of blades.
Dual puncture proof solid rubber wheelkits enable easy depth control. Standard with contractor option.
Front and rear chain kits are standard with easy to replace chain pieces.
Specifications:
Adjustable Skids
Front and Rear Chains
Cutting Width 2050mm
Overall Width 2200mm
Tractor HP 75+
Cutting Height 25-100mm
Weight 635kg
Options:
0089 EHD210 with adjustable skids offset
0099 Wheel Kit suit EHD210 Solid Rubber Wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS EHD210 SLASHERS 2.1M - 0097- 75+HP

Heavy duty hydraulic folding mulcher suitable for tractors from 100-180 hp. Universal 10mm Y-shaped flails ideal for straw, grass, beet leaves and set aside areas.
Specifications:
Actual Width: 533cm
Working Width: 504cm
Required HP: 140-180hp
Weight: 2524kg
No of Blades: 112 Y shaped flails
Features:
180hp rated gearbox (Scorpio/P)
220 hp rated gearbox (Super Scorpio/P)
Integrated over-run clutch
Floating from linkage (cat 2)
Fixed front counter blades
Replaceable upper counter blades
Double skinned chassis
Side skids
4 x 4 belt side transmission
Opening rear doors
1000 rpm PTO
Front protection flaps
10mm Y-shaped flails with straight flail
Rear lights for road transport
Parking support
Options in lieu of standard:
Spreading fins (each) (400 = 12, 450 = 14, 500 = 16, 560 = 20, 640 = 24)
Rear wheel kit
Rear roller (Scorpio/P400 - P500)
Rear roller (Super Scorpio/P560)
Rear roller (Super Scorpio/P620)
Hydraulic door opening
Hammer flails in lieu "Y" flails (Scorpio)
Hammer flails in lieu "Y" flails (Super Scorpio)
Disc kit
Models:
SCORPIO/P 400 404cm Working width 100-180hp 2296kg 88 Blades
SCORPIO/P 450 454cm Working width 120-180hp 2410kg 96 Blades
SCORPIO/P 500 504cm Working width 140-180hp 2524kg 112 Blades
SUPER SCORPIO/P 564cm Working width 160-220hp 3300kg 128 Blades
SUPER SCORPIO/P 644cm Working width 180-220hp 3771kg 144 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 5.04M (140-180HP) SCORPIO/P 500 GENERAL PURPOSE MULCHER

The Auger Torque VM1000 perfect for excavators and skid steers and can cut up to 1.5m in width.
Suitable for excavators and skid steer loaders, these mulchers are capable of handling some of the toughest clearance applications as well as more precise hedge trimming, and a working width of up to 1.5m.
Making this mulcher unique is the option of different drums and the variety of easy to fix teeth. The fixed tungsten teeth drum gives a robust blunt cutting edge for thick timber, hedges and branches, the swinging hammer teeth gives a cleaner and more precise cut and level surface for hedges.
So, whatever the job at hand you can easily switch between the options, providing the ultimate solution for all your land clearing needs.
Specifications are shown in images.
Features:
- Working width options of 1m and 1.5m
- Suitable for excavators up to 15T and skid steer loaders
- Heavy duty drum assembly - easily swapped on-site
- Swinging hammer tooth drum dense bushes, hedges & grass
- Heavy duty hydraulic motor & steel construction
- Hinged debris cover for optimal mulching performance
- Replaceable skid plates for ground protection & drum storage
Swinging Hammer teeth:
- The swinging hammer teeth drum features spade like steel teeth with a long horizontal cutting edge. This edge gives a cleaner cutting performance on soft materials like hedges, resulting in a more level surface finish after cutting. The more bladed cutting edge is especially useful for tough but stringy materials like brambles.
- The swinging mount allows the teeth to pivot backwards when they do impact a particularly solid object. This reduces the shock to the tooth and to the drum.
- Paddles are also better suited when working close to the ground in rocky environments as they can bounce back if they strike a rock or hard surface. For lighter duty work where clean cutting of soft vegetation is required, e.g. reshaping dense hedgerows or processing hedge and branch trimmings into mulch the hammer tooth is an ideal choice.
Options:
- Drum assembly
- Push bar assembly
Mulcher wear parts:
- Fixed tungsten tooth
- Swinging hammer tooth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AUGER TORQUE 1.5M WIDTH SERIES 3 VARIABLE MULCHER WITH SWINGING HAMMER

The Nobili RMS series mulchers are a heavy duty, robust machine ideal for mulching on wide areas. The RMS series is suitable for all broadacre stubble including rice, cotton, wheat and corn as well as pasture mulching applications.
Features:
Suggested Use: Grass or stubble and grass prunings up to 100mm in diameter for tractors up to 450HP.
Construction: High profile, adjustable tailboard and two mulching bars.
Control: Fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys. Dual drive with 5 rows of blades in special formation.
Attachment: Cat. III and IV quick hitch, three point linkage.
Height Control: Four rear wheels.
Specifications:
Connection Type: Linkage
Blades (Y with Straight): 144/72
PTO RPM: 1000
Working Width (mm): 6076
HP: 200-350
Product Weight (kg): 3650
Width / Height / Depth (mm): 6455 / 846 / 1600
NOTE: There is a surcharge for machinery assembly and blade changes (Excludes price of blades).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI RMS STUBBLE MULCHERS 6.07M - RMS610/012

Made in Canada
Suits 1,371 (54") - 2,413 mm (95") tyres
Features:
- Efficiently handle large tyres without physical stress, safety risks and additional personnel
- Extended reach gripper and 50° rotation
- 3-arm configuration balances the tyre perfectly
- Industry-certified and engineer-approved
- Euro Hitch standard. Other hitches available at cost
Dimensions:
Length = 2,108 mm
Width = 2,108 mm
Height = 1,219 mm
Teeth Length = 762 mm
Load Capacity = 1,814 kg
Swing - Manual / Sideways
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO TYRE GRABBER (XL) SUITS 1371MM (54") - 2413 MM (95") TYRES

2.4m Silage Grab (13 tines in base). Made in New Zealand.
Rata Silage Grabs are a multi-task attachment built to perform on your Tractor front end loader, Telehandler (2.2m sizes or larger) or Skid Steer.
With the ability of a fork & the versatility of a grab, this attachment makes bulk silage and bale handling work easy.
Being manufactured from high tensile steel makes it the strongest Silage Grab of its type available on the Australian & New Zealand market.
Rata Silage Grabs are ideal for high volume silage handling. The Grab has been the popular choice on NZ farms for many years due to its high quality build & ability to secure large amounts of silage & leave the stack or pit face clean.
All Rata Silage Grabs feature powerful hydraulic rams that bite through any silage stack and securely clamp the feed, All grabs have x2 rams apart from the ASG120 (1.2m model) which has a single centre mounted ram.
Tines are high quality and manufactured from silicium spring steel by a renowned German manufacturer, these tines are also supported with tapered conus bushes that provide extra support when under load.
With a wide opening width of 1510mm this grab can easily handle large quantities of silage or large bales. The dimension is taken from the tip of the base tine directly to the tip of the top tine.
The pin geometry has been designed to provide maximum pressure possible at every point in the open and close arc. This makes it easier to use with high clamping pressure available at all times.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 2.4M SILAGE GRAB (ALSO SUITS TELEHANDLERS)

LE Series Slashers. 2M, suits 50-75HP.
Features:
5mm galvanised deck
Cat I & II
Adjustable skids
Pivoting headstock with chain backstays
PTO driveshaft
Friction clutch
Front & rear chain guards
Standard to suit 30-75 HP tractors
Gearbox available in red or yellow.
Specifications:
Working width: 2m (6'8")
Weight: 500kg
HP: 50-75
Finish: Galvanised deck
Options:
Combination Friction & Overrun Clutch
Wheelkit (adjustable)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FIELDQUIP LE SERIES SLASHERS 2M - SUIT 50-75HP

Specifications shown in images.
The SP250 is suitable for Skid steers and Excavators from 1T-5T.
Removal of tree stumps is a job which, at best, is noisy, messy and time consuming. Traditional methods of removal, shower chippings over a wide area making clean up a time-consuming exercise. The Auger Torque Stump Planer is the quick and easy additional attachment to any earth drill for the effective, easy, and clean removal of tree stumps of any size and a must-have product for those working in ground preparation and woodland maintenance.
Features:
Hardened Steel Blades - Hardwearing, replaceable blades rotate, shaving the wood into a tidy pile.
Hub Options - A range of different hub options.
Stability Bars - A balanced, even cut is achieved thanks to the built-in stability bars.
Hardened Steel Pilot - The unique, replaceable pilot engages with the tree Stump, drawing the blades down to the surface of the stump.
Multi-Pass Cutting Pattern - Tackle very large tree stumps with ease by making multiple cuts in a spiral pattern, starting from the outside and working towards the centre.
Spare Parts:
- Stump planer pilot head assembly and/or Tip
- Blades (complete kit)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AUGER TORQUE 250MM STUMP PLANER (65MM ROUND HUB)

Super heavy duty , high clearance hydraulic grader blade for large grading applications. Suitable for tractors up to 150 hp.
Features:
For tractors up to 150 hp
2700mm (9') wide
820kg
Reversible cutting edge
Full three way hydraulic adjustment
Foot stand
Angle movement +/-40 degrees
Tilt movement +/- 27 degrees
Offset movement +/- 35 degrees
Adjustable turntable
Options:
Heavy duty height adjusting levelling wheel
Hydraulic levelling wheel
Adjustable rippers
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARMGARD 2.7M (UP TO 150 HP) HYDRAULIC (3 RAM) BULLDOZER GRADER BLADE

2.0m 4 in 1 Bucket - Made in New Zealand.
The Rata 4 in 1 bucket range consists of 4 width models to suit a range of different size machines. These are from 50 horse power machines up to 3 ton lift capacity Telehandlers / Loaders. See picture for range of sizing available.
4 in 1 buckets enable you to use one tool to dig, blade, pull back and clamp up.
(50hp +) Required.
Hydraulic rams on the Rata 4 in 1 Buckets are isolated from the working area towards the rear of the bucket. Some sizes feature enclosed rams such as shown in some pictures.
Bucket teeth are an optional extra for 4 in 1 Buckets. Bucket teeth can be particularly handy where digging in tough ground is desired.
Rata Bucket teeth are also easily replaceable.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 2.0M 4 IN 1 BUCKET (50HP +)

Murray 53020, Series 53 Tow Hitch Hayman Reece style - 3PL.
Strong robust design to assist with hooking up trailers to your tractor. Available in four different styles.
Manufactured from global materials.
Features:
- All steel construction
- Hayman Reese compatibility
- Four different styles available
- Preassembled ready for use
- Upgraded specifications and steel wall thicknesses
Specifications:
- Tow Hitch Hayman Reece style Cat I & II.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY TOW HITCH HAYMAN REECE STYLE- 3 POINT LINKAGE

Find Machinery Attachments For Sale. Browse 1375 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

CELLI 1.75M (90HP GEARBOX) MIZAR/F LOW BODY MULCHER

JOHN BERENDS EHD210 SLASHERS 2.1M - 0097- 75+HP

CELLI 5.04M (140-180HP) SCORPIO/P 500 GENERAL PURPOSE MULCHER

AUGER TORQUE 1.5M WIDTH SERIES 3 VARIABLE MULCHER WITH SWINGING HAMMER

NOBILI RMS STUBBLE MULCHERS 6.07M - RMS610/012

HIMAC EURO TYRE GRABBER (XL) SUITS 1371MM (54") - 2413 MM (95") TYRES

RATA 2.4M SILAGE GRAB (ALSO SUITS TELEHANDLERS)

FIELDQUIP LE SERIES SLASHERS 2M - SUIT 50-75HP

AUGER TORQUE 250MM STUMP PLANER (65MM ROUND HUB)

FARMGARD 2.7M (UP TO 150 HP) HYDRAULIC (3 RAM) BULLDOZER GRADER BLADE

RATA 2.0M 4 IN 1 BUCKET (50HP +)

MURRAY TOW HITCH HAYMAN REECE STYLE- 3 POINT LINKAGE

Farm Supplies Machinery & Equipment

Dealer Address