Farm Supplies Machinery & Equipment

Tubeline Bale Wrapper TL1700SR
Hydraulically powered, the TL1700SR can easily switch between round and square bales by moving the secondary drive shaft on either of the appropriate stub shafts. Each stub shaft changes the drive ratio to provide the appropriate advancement of the bale. When the carrier arm is placed in the wrapping position, the carrier can be raised or lowered, centering the wrap on the bale to provide even plastic coverage throughout the wrapping process. The TL1700SR is also equipped with Tubelines Offset Twin Wrap Kit which laminates two layers together to form a stronger 2-ply layer of plastic. The offset provides up to a 4 lead increasing the amount of overlap for greater protection.
The wrappers integrated bale mat protects the wrapped bale from being punctured as it is dumped, while the bale bumper ensures the bale lands far enough away from the wrapper so the table can rotate while the next bale is started. After dumping the bale, one of the two integrated knives easily slices through the plastic wrap. An easy to use wrap counter allows you to set the desired number of rotations of wrap per bale and displays the current rotation.
Specifications:
Bale Size (Round): 4ft x 4ft (121cm x 121cm) to 5ft x 5ft 6in (152cm x 167cm)
Bale Size (Square): 3ft High x 3ft Wide Bales up to 7ft Long (91cm High x 91cm Wide Bales up to 213cm Long)
Film Width: 30in (x2) 76.2cm (x2)
Length: 192in (488cm)
Width: 82in (208cm)
Height: 95in (241cm)
Weight: 2,865 lbs. (1300kgs)
HP Required: 13 HP
hitch: Trailer (Clevis)
Drive Type: Hydraulic
Bale Guides: 2
Offset Twin Wrap: Standard
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

TUBELINE ROUND & SQUARE BALE WRAPPER - TL1700SR

Tapered bolt on tines manufactured to the highest quality standards, pierces easily into tight silage.
Straight Conus II with coned nut.
Cat 1 linkage with Cat 2 bushes.
Lift capacity of 1,000kg evenly loaded.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS SILAGE FORK 1100MM LENGTH - 0291

Features:
2 inch high tensile spike.
Small spike stops bale from turning.
Cat 1 linkage with Cat 2 bushes.
Lift capacity of 500kg.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS ROUND BALE HANDLER - 0285

Big Square Bale Handling Fork (3 high tensile spikes welded)
Three 2inch high tensile main spikes.
Ideal for lifting big square bales.
Cat 1 linkage with Cat 2 bushes.
Lift capacity of 1,500kg evenly loaded.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS BIG SQUARE BALE HANDLING FORK - 0288

Euro Hitch Bale Spear Frame Only.
The Daken bale fork is designed to fit Euro hitch tractor front end loaders. It is made to carry up to 5 spears, each removable. Great for moving round and large square bales or moving silage.
Features:
- Frame takes up to 5 tines
- Heavy duty conus 2 tines
- Fits standard Euro hitch FEL
- Tines 1,240mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN EURO HITCH BALE SPEAR FRAME ONLY - 61012DC

Rata Hay Haulers are an essential hay bale transporter to have. If you are transporting bales from off the paddock to the wrapper, truck or storage area you can save considerable time & fuel by transporting more bales at a time & get the job done sooner.
Hay Haulers are especially handy in rolling hill country where trucks or even tractors with trailers have trouble in wet conditions. The Hay Hauler is also an awesome counter weight for tractors with front end loaders, so you can transport bales on the front as well.
Weight 440kg
Capacity 4,000kg
Minimum 115hp required
Hay Haulers feature a frame with extensive gusseting and bracing. This helps to make it as strong and rigid as possible and prevent fatigue. The hydraulic ram fitted to Hay Haulers is powerful enough to easily cope with the heaviest load of silage bales. All grease points on the Rata Hay Hauler are protected from other objects, yet easily accessed to make grease jobs as easy and fast as possible.
Rata Hay Haulers are built heavy and tough. Features such as the twin RHS box section frame help to make this the toughest and most rigid hay hauler available. The Rata Hay Hauler has also been designed to keep vision obstruction to a minimum when loaded and when unloaded.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 2.5M (WIDE) 3PL HAY HAULER

Rata 1.2m Bale Fork. Made in New Zealand.
This model of Bale Fork is the 'standard' or 'conventional' model, designed for use on just about any dairy or livestock farmers tractor.
A Telehandler spec model is also available upon request.
Tine Width = 1.2m
Machined Conus 2 Taper Cones
German Forged Spring Steel Tines
Small Centre Tine included
Frame is fully Welded RHS
Tines are forged spring steel, held in with a conus 2 welded taper bush. These high strength bale forks can be made to fit almost any Tractors front end loader or Telehandler
Tine length is from the overall length of the tine, from the nut right out to the point. This means that a 0.98m long tine has around 850mm of usable length to spear into a bale. The other 130mm of the tine is inside or behind the backframe.
Measurements are approximate.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 1.2M EURO HITCH BALE FORK

Suitable for raking, turning and spreading hay crops, silage and grain crop stubble.
Construction: Simple robust construction requiring minimal maintenance.
Drive Line: Ground drive.
Control: Single set hydraulics via tractor remote.
Attachment: Cat. II clevis to tractor drawbar.
Windrow Width: 3 6ft / 0.9 1.8m
Specifications:
Type: Trailed V with Dual Hydraulic Kicker Wheels Standard
Working Width (m): 7.6
Product Weight (kg): 1680
Number of rake wheels (L/R-Splitters): 6/6 +2
Tynes Per Wheel: 40
Rake wheel diameter: 1400mm
Transport width: 2.5m
Number of Ground Wheels/Size: 4 x 205-75/15
Note: Hayrakes Delivered Unassembled
* Maximum working width and speeds depend greatly upon product raked, volume and general conditions.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SITREX HYDRAULIC TRAILED MAGNUM V HAYRAKES - 6L/6R+2 RAKE WHEELS - SITREX - HR-MK12

Tapered bolt on tines manufactured to the highest quality standards, pierces easily into tight silage.
Straight Conus II with coned nut.
Cat 1 linkage with Cat 2 bushes.
Lift capacity of 1000kg evenly loaded.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS SILAGE FORK 1400MM LENGTH - 0293

1 x Bale Spear 1240mm for Euro Hitch Bale Frame.
It is made to carry up to 5 spears, each removable.
Great for moving round and large square bales or moving silage.
Features:
- Frame takes up to 5 tines
- Heavy duty conus 2 tines
- Fits standard Euro hitch FEL
- Tines 1240mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN BALE SPEAR 1240MM FOR EURO HITCH BALE FRAME- SSB-007

3pl Bale spike - Single Spike
The three-point linkage round bale spike is designed to handle a single round hay bale.
Features:
- Bolt-in main spike
- 2 stabiliser spikes
- Suits Cat 0 and 1
- Made from RHS
- Weight: 45kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN 3PL BALE SPIKE- SINGLE SPIKE - 61010DC

Tanco Round Bale Wrapper S100
Tanco has always been synonymous with the development of satellite wrapping systems. The S100 A is the entry model to the renowned S series and delivers many of the great features of the series at an affordable price.
The S100 A is fully automatic with all controls managed through the RDS Expert controller. Bales can be wrapped in the field or the yard with the unique Wrap & Stack feature. Compact and lightweight, this model is also ideally suited for hilly conditions as bale movement is reduced to a minimum during wrapping.
Furthermore, bales can be placed on their flat end with the optional End-Tip kit, ensuring bales do not roll once off-loaded.
Standard Features
Tanco Dual Stretch Aluminium Dispenser with 55% and 70% stretch options built in.
Individually driven pick-up rollers.
Single dispenser.
Telescopic cut and start.
RDS Expert Controller.
Optional Extras
End-Tip Kit, places bales on their end where plastic coverage is greatest and avoids bales rolling.
Ground roller takes the weight of the bale and machine in cases of lighter tractors.
Radio remote control.
6 and 4 metre extension cables.
Specifications
Height in Transport: 22.4m
Transport Width: 1.4m
Transport Length: 2.3m
Weight: 720kgs
Maximum Bale Diameter: 1.5m
Maximum Bale Weight: 1200 kg
Hydraulic Connection: Single Working and Free Return
Oil Pressure: 180 bar/2600psi
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

TANCO ROUND BALE WRAPPER - S100

Find HAY Tools For Sale from Farm Supplies Machinery & Equipment.

New & Used HAY Tools For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

TUBELINE ROUND & SQUARE BALE WRAPPER - TL1700SR

JOHN BERENDS SILAGE FORK 1100MM LENGTH - 0291

JOHN BERENDS ROUND BALE HANDLER - 0285

JOHN BERENDS BIG SQUARE BALE HANDLING FORK - 0288

DAKEN EURO HITCH BALE SPEAR FRAME ONLY - 61012DC

RATA 2.5M (WIDE) 3PL HAY HAULER

RATA 1.2M EURO HITCH BALE FORK

SITREX HYDRAULIC TRAILED MAGNUM V HAYRAKES - 6L/6R+2 RAKE WHEELS - SITREX - HR-MK12

JOHN BERENDS SILAGE FORK 1400MM LENGTH - 0293

DAKEN BALE SPEAR 1240MM FOR EURO HITCH BALE FRAME- SSB-007

DAKEN 3PL BALE SPIKE- SINGLE SPIKE - 61010DC

TANCO ROUND BALE WRAPPER - S100

Farm Supplies Machinery & Equipment

Dealer Address