Farm Supplies Machinery & Equipment

Silvan 2.1m (7ft ) Heavy Duty Slasher with 100hp gearbox.
Suited to large acreage applications including clearance, firebreaks, private roadsides or where major cutting & cleaning is required.
Features:
- Construction: welded 6mm top deck plate, welded steel side plates with adjustable skids.
- Gearbox: 100HP Series 8, 1:1.93 ratio.
- PTO Shaft Rating: 540 RPM
- Head Stock: Collapsible floating hitch.
- Finish: Long lasting galvanized top deck.
- Skids: Adjustable from 50-150mm cutting height.
- Blades: 3 leaf spring steel rotor bar with hardened bushes and 2 Boron step down blades.
- Mounting: Cat. II TPL centre mount attachment.
- Clutch: 8" 2 plate friction clutch.
- Instructions: Operators manual and holder supplied.
- Chain Guards: Front and rear chain guards
Specifications:
- Connection Type: Linkage
- Working Width (mm): 2,100
- Overall Width (mm): 2,200
- Cutting Height (mm): 50-150
- Overall Height (mm): 1,020
- Product Weight (kg): 574
Options:
103WRSHC2 - Height Control Wheel (2 recommended for 7' models)
131RSHC2 - Heavy Duty Height Control Wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 2.1M (100HP GEARBOX) - INCL ROTOR & CHAIN GUARDS - HEAVY DUTY SLASHER

An excellent addition to your own steel posts & stays. Already have your own posts and stays? Our fitting kits have all the components you need to build your own end assembly.
Are you looking for a long lasting rust resistant fence straining kit that can take less than 15 minutes to set up? Our fitting kits are simple and very easy to install.
Everything is bolt on. No need to carry around your welder or drill. All you need is something to tighten the nuts and bolts.
The design of our Twist Tight Stay Connectors means you can run your end assemble at any angle or pair it with corner kit.
Our unique design incorporates a cable instead of a tension rod. It is a lot quicker to install just drop the loop over your post, or slip knot it if you have existing wire installed and run the tension cable to your footplate. No drilling required.
All components are either stainless steel or hot dipped galvanised to ensure a long lasting end assembly.
Be careful of other alternatives that say they are galvanised (when really, they aren't).
Price quoted is for one kit. Kit includes...
Cap, Post & Stay Connector, Footplate, & Tension Cable.
Discounts apply for bulk kit purchases of 5+, 50+ or 120+.
Features:
- Fast install
- Strong & reliable
- Galvanised
- Bolt-on
- Any angle
- Easy to store
Specifications:
- 100NB (114mm O.D) Post
- 40NB (48mm O.D) Stay
- Medium stay section
- 3.2mm Stay wall thickness
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL MEDIUM FITTING KIT (BOLT-ON COMPONENTS. NO PIPE INC) - 100NB X 40NB - SSFK10040M

2.31m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3501 - 2.31m (7ft 7in) 2/12 Tine, 1/16 Tine - 40kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 2.31M,4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

The Twist-Tight post and stay connectors have been designed specifically for
the demands of farm fences, not lighter duty applications like security fences.
A high tensile (8.8) M12 bolt secures the tongue and clamp onto the post. A bolt is secure, unlike a pre-drilled hole.
The 6mm thick tongue goes 125mm down inside the stay, this significantly
increases the strength and effectiveness.
The Twist-Tight clamp allows for adjustment at any time, unlike alternative
options, where the stay has been welded or inserted into pre-drilled holes.
Price quoted is for one item.
Discounts apply for bulk kit purchases of 20+, 40+ or 100+.
Features:
- No drilling
- No welding
- Adjustable
- Easy Install
- Fast install
- Strong
- Anti-bruise
Specifications:
- 80NB (89mm O.D) post
- 40NB (48mm O.D) stay
- Extra light stay section
- 2.3mm stay wall thickness
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL TWIST-TIGHT POST & STAY CONNECTORS (EXTRA LIGHT) 80NB X 40NB - PSC8040

2750 spreader is the weapon (spreader) of choice when your terrain is hilly or wet.
The corrosion, tear and weather resistant 25lb/11.4kg nylon bag hopper is equipped with a zippered top for easy filling and closure.
This nylon construction allows for the bag to remain upright when filling yet collapse for easy storage.
The contoured base for fitting around your hip, the adjustable shoulder strap, and the long crank handle; 2750 designed with comfortable operation in mind.
The exclusive rocking agitator provides smooth, even material feeding to the distribution plate. In addition, our high-speed direct-drive gearbox allows the operator to adjust the spread width between 8 ft/215 cm to 12 ft/457 cm by simply changing the crank rate.
Complete directional control and spring to close shut-off make 2750 the ultimate choice in hand operated spreaders.
Features:
- 25 lb / 11.4 kg Hopper capacity (fertilizer weight, grass seed weightless)
- Zippered top rustproof nylon construction
- Contoured moulded base
- Adjustable shoulder strap
- Rocking agitator
- Spring-loaded shut-off
- 1 Year Limited Warranty
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

EARTHWAY BAG SPREADER EARTHWAY 11KG - ES-2750

Powertech Honda GX50 Post Driver (PPD-120)
The Powertech Honda Post Driver 120 is 'THE HULK' of post-drivers, and photos don't do it justice. Designed for the commercial fencing market the PPD-120 is the largest of the Powertech Post Driver range and is a serious piece of kit. Capable of driving small wooden stakes and star pickets right through to larger steel and wooden strainer posts.
The Honda GX50 4-Stroke engine gives the PPD-120 its supreme punching power and reliability. This is the largest hand-held unit on the market so If you require a Post Driver that does it all then this is the model for you. Engineered with an oil and grease lubricated gearbox and piston housing this unit is build to last and requires minimal maintenance.
The kit includes 5 different post sleeves and inserts to help cover the large variety of fence posts on the market today. We also have a selection of other adaptors to suit the most common applications so please give us a call if you are unsure whether what is provided in the kit will suit your needs.
Powered by a genuine Honda 4-Stroke engine - Honda's GX50 general-purpose engine expands our Mini-Four Stroke line up with a model that offers high output and outstanding performance. Capable of performing in demanding commercial and rental applications with excellent fuel efficiency and reliability. The GX50 is the first Honda four-stroke model in the two-horsepower class that is 360-degrees inclinable during operation and storage.
Specifications:
- Capable of driving posts from 50mm - 120mm.
- Powered by the Honda GX50 4-stroke engine.
- Max Power: 1.47kw@7000rpm 2.2Nm@5500rpm
- Impact energy: 25-60J
- Hydraulic oil & grease lubricated internals
- Unit weight: 24kg
- 360-degree inclinable operation.
- Includes five post sleeves 45mm, 55mm, 60mm, 100mm & 120mm.
- Perfect for driving planting stakes, star pickets and a range of fencing posts from steel to wooden strainers.
- Internal spring-mounted handles for vibration absorption.
- Durable carry case and tool kit included.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POWERTECH HONDA GX50 POST DRIVER - PPD-120

Series 37 1.83m Mounted Spring Tine Harrow System - Heavy Duty 3 Rank- Kinked Tines.
A Heavy Duty Spring Tine Harrow. Designed to fit onto the rear bar of Scarifiers and Chisel Plows to assist in breaking
down ground and seed bed preparation.
Complementing scarifiers and chisel plows, it will break down cloddy ground and aid final seedbed preparation.
Using larger 465mm (183/4) by 12mm Diameter tines with a 75mm (3) spacing, the Series 37 is put together using a heavier tine section frame.
Available in a 3 Rank model, it is supplied with two mounting arms for each section. Two sizes are available 1.83m (6) and 2.28m (76).
Experience the difference with our kinked tine designed to exert aggression in breaking down cloddy ground and final seedbed preparation.
Specifications:
- Coverage: 1.83m
- Weight: 146kg
- Tine spacing 75mm (3) 3 Rank.
- Tine Diameter 12mm Kinked Tine.
- Tine length 465mm (18 1/4) approx.
- Rank spacing 305mm (12).
- 2 Mount Arms per unit.
Features:
- Unit features two Mount Arms (Model 37004 with reinforced bolt-on clamp plate).
- Standard mount clamp suits 75mm to 100mm (3 to 4) square frames positioned on the flat.
- Adjustable Tine angle
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1.83M MOUNTED SPRING TINE HARROW SYSTEM - HEAVY DUTY - 3 RANK

XLE Series Slasher. 1.5m, suits 60-100 HP - Australian Made
Specifications:
Working width: 1.5m (5')
Weight: 360kg
HP: 60-100
Finish: Galvanised Deck.
Features:
5mm galvanized deck.
Suits 60-100 HP tractors.
Cat I & II.
Adjustable skids.
Pivoting headstock with chain backstays.
PTO driveshaft.
Friction clutch.
Front and rear chain guards.
Gearbox available in red or yellow.
Optional Extras:
Wheelkit (adjustable)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP XLE SERIES SLASHERS 1.5M - SUIT 60-100HP

3.25m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3305 - 3.25m (10ft 8in) - 2/9 Tine, 2/12 Tine - 46kg
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

The rigid chisel plough is used in a similar fashion to the stump jump as a primary cultivator.
The rigid tine is harder to pull as it has not got the jack hammering effect of the stump jump tine. It should also be used in country which is known to be clean, as the tine is clamped onto the frame and will only shear the clamp bolts under load.
The tines are extremely strong for this reason, using the same tines as the stump jump plough. The machine is ideal for lighter sandy soils where penetration and draft are not a problem.
Features:
9 Tines at 12 adjustable spacings.
Heavy duty 100x100x6mm frame.
Overall width of the machine is 9 wider than the cut width ie 5 tine is 5 9, 7 tine is 79 and so on.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Available in 5, 7, 9 and 11 tine sizes with tines at 12 adjustable spacings.
Horsepower requirements vary widely but 10 HP per tine is a rough guide.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18).
Options:
0200 Depth Wheels (Pair Holden)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 9'9" (2.9M) - 0184

Champion 4,500W Inverter Generator - Enclosed
Champion is renowned as a top manufacturer of small engines and the #1 selling generator brand in the USA.
The Champion 4500W Inverter Generator is the perfect combination of versatility and convenience. A quiet and lightweight companion for your next camping or tailgating weekend, this inverter can also provide backup power during an outage. Start and stop your generator from up to 25 metres away with the included wireless remote key fob.
The convenient electric start includes a battery, plus the Quick Touch Panel allows access to controls in one spot. The reliable 192cc Champion single-cylinder OHV engine produces 4500 starting watts and 3400 running watts and can handle the essentials during an outage. Since this inverter produces only Clean Power (less than 3% THD), you can connect your sensitive electronics with confidence. Designed for safety with a low oil shut-off sensor, this inverter has a 0.6L oil capacity (recommended 10W-30).
Included are two 230V 15A household outlets plus a 12V DC automotive-style outlet with a dual port USB Adapter. Enjoy up to 7.5 hours of run time with a full 6L tank of gasoline at 25% load. From 7 metres, this inverter operates at 59 dBA - about the same noise level as normal conversation.
Champion's Inverter Technology includes smart Economy Mode, which can reduce the electrical load, providing you with quieter operation, extended engine life and better fuel economy. Fully assembled with easy set-up, the foldaway handle makes it easy to store, while the never-flat tires make transport a cinch.
Pure sine wave inverter
Fuel, Unleaded petrol
Auto overload protection
Manual choke
What's Included:
Oil Funnel
Engine Oil
Battery
Remote Key Fob
USB Adapter
Protective Cover
Quick Touch Panel
Access all your controls in one spot, plus Champion's safe design includes a low oil shut-off sensor.
Ultra-Quiet Operation
59 dBA is perfect for RVs, tailgating, your next project or backup power for your home, featuring 4500 starting watts and 3400 running watts with up to 7.5 hours run time
Clean Electricity for Sensitive Electronics
Parallel Ready
Increase your power output by connecting to one or more 2800-watt (or higher) inverters with the optional Parallel Kit
Specifications:
Warranty 2 Years
Battery Yes
Engine 192 cc, 4 stroke
Start Mode Recoil, Electric, Remote
Fuel Tank Capacity 6
Low Oil Sensor Yes
Noise 59 dB(A)
Oil Capacity 0.6 L
Oil SAE 10W-30
Size (LxWxH) 615x470x500mm
Wheels 140mm, Solid
Weight 37 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POWERTECH CHAMPION 4,500W INVERTER GENERATOR - ENCLOSED

High quality range of augers which feature 6mm flighting, alloy plate boring heads with double cutting edges for greater drilling effectiveness.
Material: 50mm pipe
Finish: Premium enamel top coat.
Flights = 5
Weight = 14kg
Diameter = 152mm or 6 inches
Other sizes (152mm, 203mm, 254mm, 305mm) available as listed on this same website.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 152MM DOUBLE START AUGER

Find Farm Machinery For Sale in Queensland. Browse 7614 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 2.1M (100HP GEARBOX) - INCL ROTOR & CHAIN GUARDS - HEAVY DUTY SLASHER

ROTECH RURAL MEDIUM FITTING KIT (BOLT-ON COMPONENTS. NO PIPE INC) - 100NB X 40NB - SSFK10040M

MURRAY SERIES 03 LEVELLING HARROW 2.31M,4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

ROTECH RURAL TWIST-TIGHT POST & STAY CONNECTORS (EXTRA LIGHT) 80NB X 40NB - PSC8040

EARTHWAY BAG SPREADER EARTHWAY 11KG - ES-2750

POWERTECH HONDA GX50 POST DRIVER - PPD-120

MURRAY 1.83M MOUNTED SPRING TINE HARROW SYSTEM - HEAVY DUTY - 3 RANK

FIELDQUIP XLE SERIES SLASHERS 1.5M - SUIT 60-100HP

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 9'9" (2.9M) - 0184

POWERTECH CHAMPION 4,500W INVERTER GENERATOR - ENCLOSED

SILVAN 152MM DOUBLE START AUGER

Farm Supplies Machinery & Equipment

Dealer Address