Farm Supplies Machinery & Equipment

Trailed air assist Supaflo 2000 litre sprayer with 161 L/min diaphragm pump, electric controls, a Glideflex axle upgrade, wide angle shaft and a 900mm fan. Ideal for vineyards and orchards.
Specifications:
Market: Horticulture. Viticulture
Tank Size (L): 2000
Connection Type: Trailed
Min PTO hp: 60
Pump Size (L/min): 161
Height / Width / Length (mm): 1530 / 1540 / 3540
Product Weight (kg): 540 (dry)
Application: Vineyards and Orchards
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body with brass heads and manifold. IDS1701:161L/min. capacity, 5000kPa pressure.
Fan size: 900mm axial flow type, 10 bladed fan with curved nylon reinforced blades, air straightening vanes and protective mesh cover. Powerhead (920mm) & Radak (1,000mm) fitted with axial flow type, 10 bladed fan, centrifugal clutch and protective mesh cover.
Nozzles: Flip-over type for dilute/concentrate spraying. Ceramic jets, stainless steel swirl-plates. 16 double sided nozzles (8 per side) twist on/off. The Powerhead has 24 double sided nozzles (12 per side) and the Radak has 32 (16 per side).
Gearbox: 2-speed with neutral position, oil-bath type
Control: 40 bar electric section valves, master valve, electric pressure regulator and in cab controls.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip-top easy open lids, 40mm drain valve and built-in chemical mixer. 40L fresh water hand wash tank.
Frame: Galvanised steel with jockey wheel & adjustable drawbar.
Agitation: Pump bypass plus venturi agitator.
Pressure gauge: 100mm, 0-60 bar glycerine filled gauge.
Filtration: Lid strainer, suction line strainer & stainless steel nozzle filters.
Wheel Equipment: Glideflex suspension axle, 2x15" tubeless tyres on galvanised rims (max speed rating 30 km/h)
PTO Driveshaft: Quality Bondioli & Pavesi constant velocity driveshaft with quick release pins & safety cover.
HP Required: Min 60 PTO HP
Options:
- Powerhead Conveyor (in lieu of standard fan cowling) (D99-184)
- Radak Conveyor - Manual adjustment of top and bottom wings (In lieu of standard fan cowling) (D99-135)
- Hydraulic kit for Radak Conveyor (top wings) (D99-155B)
- SCRAM Jet (to suit Radak Conveyor) (D99-180)
- One sided conveyor (D99-41)
- Leaf guard (to suit Powerhead & Radak) (D99-175)
- Twin nozzle (includes extra nozzles) (D99-182)
- Two-sided poly vineyard conveyor (D99-111)
- Bravo 180S automatic rate controller (D99-143)
- Flotation tyres - 400/60 x 15.5" with fixed axle (in lieu of standard singles) (D99-80)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 2,000L SUPAFLO TRAILED SPRAYER - MIN 60PTO HP

Rigid box construction rotary hoes suitable for ground preparation on small farms and market gardens.
Features:
40 HP single speed gearbox.
1650mm working width.
Side chain drive with auto tensioner.
32 x C blades.
Cat I or II three point linkage.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Market: Ag Lifestyle
Connection Type: Linkage
Min Tractor PTO HP: 30-40 HP
Working Width (mm): 1650
Working Depth (mm): 50-150
Product Weight (kg): 245
Total Width (mm): 1820
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 1.65M B40F ROTARY HOE (MIN 30-40HP)

2.56m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3602 - 2.56m (8ft 5in) 1/12 Tine, 2/16 Tine - 56kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 2.56M, 4 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

Murray 1200 x 1200mm DIY Welding Table - Series 72.
The Hugh Murray Welding Tables jig / fixture table is a much needed design change from your typical fabrication
table. The removable centre plate allows you to get into those hard to reach spots without having to relocate yourself
and your equipment every time you need to adjust your position. The removable plate makes short work of those
arduous welding tasks and can accommodate even the most complex welding projects.
The other major design change is on the under side of the table; the installation of the legs is made easy and precise by
designing the leg adapter plates in such a way that the legs will run perfectly square and weld directly to the table, this
makes assembly of the legs a quick and easy task with no time wasting. This table is designed to only accept 50x50mm
square hollow section (SHS) as legs because it is a very common SHS dimension and can be found at every steel
supplier. This is so that the customer can choose the height of their table to suit their needs, rather than a one-size-fits-all approach.
Please note that the legs are not included.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1200 X 1200MM DIY WELDING TABLE - SERIES 72

The perfect family sprayer get rid of your weeds and bugs.
- Rechargeable 24V lithium ion battery
- 3.8L/min with 60psi Pump
- Lance clips storage
- 4ply, 10 inflatable tires
- Adjustable nozzles
- Comfortable locking trigger lance handle
- Removable trolley handle for easy storage
Make spraying easy with the trolley sprayer. Either push or pull, trolley sprayers can be used for either spot spraying or boom spraying with the easy attached broadcast nozzles. The smaller trolley sprayers are ideal for the smaller home garden versus the larger trolley sprayers are perfect for the larger garden, vegetable patches or lawn areas.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID SPRAY 30L RECHARGEABLE TROLLEY SPRAYER (24V)

The PLR is designed to till the floor material in poultry sheds in order to break up the large clods and aerate the material, improving animal health and increasing productivity.
Specifications:
Tractor HP: 22-40 HP
Connection Type: Linkage
Working Width: 1420mm
Weight: 240kg
Features:
- The reverse rotation rotor with increased speed for an effective till
- Front and rear debris guards to minimise noise and dust
- Adjustable full length skids for accurate height control
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 1.4M PLR ROTARY HOE (22-40HP)

The multi-purpose, heavy duty mulching mowers are ideal for a variety of mulching applications. From rejuvenating old pastures to cutting up pruning's, gorse bush and scrub up to 50mm in diameter. Designed and manufactured in Australia for Australian conditions.
Suitable for a large range of surfaces including sports and school grounds, golf courses, vineyards, orchards, general pasture and road side contracting. Also available with hydraulic side shift which moves the mulcher up to 230mm in either direction.
Features
Adjustable Cat 1 and 2 linkages with floating top link position for undulating ground.
Heavy duty belt cover with inspection hatch.
5mm thick front stone guards.
Sturdy 5mm top deck.
High quality 2 pack paint finish.
Heavy duty 85HP Italian Oil Bath Gearbox Series 7 Italian Driveshaft with optional over-run clutch.
Standard with adjustable rear roller. Fitted with triple sealed bearings with grease release seals.
Adjustable back flap doubles as a scraper for the roller when in the mulching position.
Optional adjustable skids and wheels are available for depth control.
Heavy duty 2 bearings with taper lock centres and dust protection plate. Also fitted with anti-wire rotor guard.
Also Available:
0120 Cyclomatic 2100 (7) Offset Mulcher
Specifications:
Cutting Width: 2.05m
Overall Width: 2.3m
Body Height: 500mm
Weight: 540kg
Tractor HP Range: 56-84
Blade tip speed: 200km/hr
Rotor speed at 540rpm: 2268rpm
No of Y blades (Standard): 48
No of Tee Hammers (Flails) (Optional): 24
No of SPB vee belts: 4
Rotor Size: 168x11mm
Alignment (adjustable): Offset/Centre
Options:
1612 Mulcher Adjustable Skids (Pair)
1611 Mulcher Hydraulic Side Shift (Does not suit 0122 model)
1613 Mulcher Adjustable Pair Solid Rubber Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS CYCLOMATIC 2100 (7') CENTRE LINE MULCHER - 0150,56-84HP

Simple. No Frills Latch. Looking for a simple way to keep your gate closed? Our galvanised hook latches offer an easy no frills way to keep your gate shut.
Price quoted is for one latch & one staple.
Discounts apply for bulk purchases of 10+, 25+, 50+.
Features:
- Simple to use
- No frills
- Long lasting
Specifications:
- 700mm chain length
- Standard hook latch
- Staple
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL HOOK LATCH & STAPLE 700MM - CLS700

Series 30 2.13m Mounted Spring Tine Harrow System - Light Duty 2 Rank- Straight Tines.
The Series 30 Light Duty is the perfect implement for sandy to light soils. Specifically designed to increase trash flow using wide spacing between each straight tine, the 2 rank is a lighter duty harrow available in five sizes ranging from 1.78m (510) to 3.20m (106). Each section is supplied complete with two mount arms.
Harrow depth control is adjustable by means of specially designed cam-action fitting within the mount arm.
Specifications:
- Coverage: 2.13m
- Weight: 62kg
- Tine spacing 85mm (3 3/8) 2 Rank.
- Tine Diameter 10mm Straight Tine.
- Tine length 385mm (15) approx.
- Rank Spacing 324mm (12 3/4").
- 2 Mount Arms per unit.
- Mount clamp suits 81mm to 100mm (3 1/4 to 4) square frame positioned on the flat or on the edge (Spacers
required for 75mm [3] square frame).
Features:
- May be attached to the rear bar of light duty cultivators, seeding drills, etc.
- Unit features two Series 30 Mount Arms.
- A cam incorporated in the mount clamp adjusts the height of the Harrow Tine Section.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 2.13M MOUNTED SPRING TINE HARROW SYSTEM - LIGHT DUTY - 2 RANK

The Twist-Tight post and stay connectors have been designed specifically for the demands of farm fences, not lighter duty applications like security fences.
A high tensile (8.8) M12 bolt secures the tongue and clamp onto the post. A bolt is secure, unlike a pre-drilled hole.
The 6mm thick tongue goes 125mm down inside the stay, this significantly increases the strength and effectiveness.
The Twist-Tight clamp allows for adjustment at any time, unlike alternative options, where the stay has been welded or inserted into pre-drilled holes.
Price quoted is for one item.
Discounts apply for bulk kit purchases of 20+, 40+ or 100+.
Features:
- No drilling
- No welding
- Adjustable
- Easy Install
- Fast install
- Strong
- Anti-bruise
Specifications:
- 80NB (89mm O.D) post
- 40NB (48mm O.D) stay
- Medium stay section
- 3.2mm stay wall thickness
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL TWIST-TIGHT POST & STAY CONNECTORS 80NB X 40NB (MEDIUM) - PSC8040M

The two-hole straining plate increases efficiency at every running post and corner in your fence-line. It serves two main functions: (1) to allows the wire to be quickly strained at running posts & corners without tying a knot and (2) to preserve 100% of the wire strength. No knot means no weakness in the wire, and it works on both plain and barbed wire.
In over 5 years of use there hasn't been a single wire slip.
(Tek Screws NOT included, but can be added to order). Simply attach and tighten it over the wire with two tek screws (14 gauge, 3/8 drive x 25mm) and you have a solid grip on the wire. Avoid over-tightening your tek screws.
Note: These are designed to replace knots along the line, where there are multiple running strainer posts. They don't replace your normal termination knot at both far ends of the fence.
Options:
- Two Tek Screws Per Two Hole Plate
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WALTERS FENCING TWO-HOLE STRAINING PLATES (BOX OF 50)

Series 08 - 4.31m Stump Jump Harrow System with Standard 4 point pull drawbar - Complete Set.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and 4 Point Pull Drawbar.
8105 - 5 Section with bar 4.31m (14ft 2in).
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 4.31m (14ft 2in)
- Weight 265kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 4.31M STUMP JUMP HARROW WITH STD 4 POINT PULL DRAWBAR COMPLETE SET- SERIES 08

Find Farm Machinery For Sale in Queensland. Browse 7660 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 2,000L SUPAFLO TRAILED SPRAYER - MIN 60PTO HP

BREVIGLIERI 1.65M B40F ROTARY HOE (MIN 30-40HP)

MURRAY SERIES 03 LEVELLING HARROW 2.56M, 4 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

MURRAY 1200 X 1200MM DIY WELDING TABLE - SERIES 72

RAPID SPRAY 30L RECHARGEABLE TROLLEY SPRAYER (24V)

BREVIGLIERI 1.4M PLR ROTARY HOE (22-40HP)

JOHN BERENDS CYCLOMATIC 2100 (7') CENTRE LINE MULCHER - 0150,56-84HP

ROTECH RURAL HOOK LATCH & STAPLE 700MM - CLS700

MURRAY 2.13M MOUNTED SPRING TINE HARROW SYSTEM - LIGHT DUTY - 2 RANK

ROTECH RURAL TWIST-TIGHT POST & STAY CONNECTORS 80NB X 40NB (MEDIUM) - PSC8040M

WALTERS FENCING TWO-HOLE STRAINING PLATES (BOX OF 50)

MURRAY 4.31M STUMP JUMP HARROW WITH STD 4 POINT PULL DRAWBAR COMPLETE SET- SERIES 08

Farm Supplies Machinery & Equipment

Dealer Address