Farm Supplies Machinery & Equipment

The rigid chisel plough is used in a similar fashion to the stump jump as a primary cultivator.
The rigid tine is harder to pull as it has not got the jack hammering effect of the stump jump tine. It should also be used in country which is known to be clean, as the tine is clamped onto the frame and will only shear the clamp bolts under load.
The tines are extremely strong for this reason, using the same tines as the stump jump plough. The machine is ideal for lighter sandy soils where penetration and draft are not a problem.
Features:
5 Tines at 12 adjustable spacings.
Heavy duty 100x100x6mm frame.
Overall width of the machine is 9 wider than the cut width ie 5 tine is 5 9, 7 tine is 79 and so on.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Available in 5, 7, 9 and 11 tine sizes with tines at 12 adjustable spacings.
Horsepower requirements vary widely but 10 HP per tine is a rough guide.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18).
Options:
0200 Depth Wheels (Pair Holden)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 5'9" (1.75M) - 0182

Features:
100HP two speed gearbox (540 RPM).
Phased rotors 200mm pitch.
Head stock centre mounted.
Leveling bar standard.
Floating side shields.
2460mm working width.
80 270mm Working depth.
1 3/8in 6 spline PTO with slip clutch.
Phased Rotor Benefits:
Reduces the absorption of power and fuel consumption.
Eliminates vibrations.
Better soil crumbling.
MF100-250CR Specifications (with Cage Roller)
Connection Type: Linkage
Min Tractor PTO HP: 70-100 HP
No. of Blades: 24
Working Width (mm): 2460
Product Weight (kg): 770
Total Width (mm): 2550
MF100-250PR Specifications (with Packer Roller):
Connection Type: Linkage
Min PTO HP: 70-100 HP
No. of Blades: 24
Working Width (mm): 2460
Product Weight (kg): 880
Total Width (mm): 2550
Factory Options:
Stone Collar Protection
Wheel Track Eradicator
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI MEKFARMER 100 POWER HARROWS 2.46M - BREVIGLIERI - MF100-250CR, MIN 70-100HP

This Low Profile 2,270L rainwater tank provides a handy supplement to your households main water supply for a range of uses such as garden irrigation and laundry. As with all Polymaster rainwater tanks, this certified tank is manufactured with strength in mind.
When you invest in a rainwater tank its important that you get one that lasts and is fit for purpose. Australian standards are put in place to give households, peace of mind when it comes a tanks usability.
Dimensions:
Capacity : 2,270 L (500 gallons)
Diameter: 1,700 mm
Inlet Height : 1,200 mm
Overall Height : 1,310 mm
Features:
- Self supporting roof means no support poles are necessary
- One piece construction means no joins or seams
- Solid brass threaded outlet & ball valve as standard
- Upgraded outlet and ball valves are available at an additional cost
- Certified to AS/NZS 4766:2006 Standard
- Outlet standard position 6 o'clock
- Outlet position can be moved from standard based on positions on the Fit Out Clock
- Replacement manhole covers and strainers available
- Available in 22 Colours
- 90mm overflow as standard
Standard Fit Out:
Strainer Position: 12 o'clock
Outlet Position: 6 o'clock
Overflow Position: 11 o'clock
Strainer Size: 400 mm
Outlet: 25 mm (brass)
Ball Valve : 25 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 2,270L RAINWATER TANK (LOW PROFILE)

The Nobili mulcher TRP 95, 120, 145, 175 are provided with pick-up is a mounted machine that fits on the three-point linkage of the rear hydraulic lift of the tractor. Through the pick-up device the machine picks up the pruning remains, lifting and carrying them inside the mulching chamber where they are cut and then put down on the ground through calibrated holes of the frame. In working position it is supported by steering wheels or by the roller.
The 8 rows rotor, provided with hammers, ensures a more regular rotation, less vibrations, low power requirement and high working speeds in every condition. The double output gearbox with built in overrunning clutch ensures sturdiness and reliability.
The mulcher has been constructed in compliance with EC Regulations.
Specifications:
Tractor Connection: Linkage (Cat II, floating top link)
Connecting position: Rear
Engine speed rpm: 540
Tractor horse power HP: 60-120, KW: 44-88
Cast Hammer Blade: 12
Working Width: 956mm
Overall Width: 1217mm
Weight: 625kg
Features:
Suggested Use: Mulcher suited to stony ground with pick up front for green pruning's to 100mm.
Construction: High profile, adjustable tailboard, two mulching bars and filter grid.
Control: Fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Skids.
Options:
- Hydraulic pickup
- Roller
- Front wheels
- Reversible model (TRP175 only)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI 95CM TRP MULCHER (SUIT 60-150HP)

A robust harrow ideal for pasture renovation, landscaping, horse arenas, race tracks, sports fields and for seed/fertiliser incorporation.
Features:
12mm scarifier tines break up manure, loosens hard surfaces and increases aeration which in turn stimulates new growth.
12mm rear smudger bars spread manure and help level the ground.
Simple flexible design follows the ground contours without tangling up.
Self cleaning flexible action.
Trailing design with sturdy 100×50 channel iron draw bar and 12mm towing chain.
Trailing weights 4 on 8ft (2.4m)
Optional lifting frame available for easy transporting.
Very low maintenance.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 8FT PASTURE HARROWS - 0403

Merbein ploughs consist of left hand and right hand, two or three disc units attached to a range of toolbar sizes, to create just the right bed or channel for your needs.
Merbein ploughs can also be fitted with just a single two or three disc unit, balanced by a coulter. 6ft, 7ft and 8ft Toolbars are available.
Plough assemblies adjustable for width along the toolbar to either mound beds or reversed to form shallow channels. Should only be operated in cultivated soil.
This item includes:
Two 0520 units with x2 Discs each side plus one 0530 7ft (2.1m) Toolbar.
Please specify left or right hand when ordering. Left hand throws dirt to the left hand side and right hand throws dirt to the right hand side.
Also Available:
0536 Merbein rear coulter (one side only)
Please specify left or right hand when ordering. Left hand throws dirt to the left hand side and right hand throws dirt to the right hand side.
0528 6ft (1.8m) merbein toolbar
0530 7ft (2.1m) merbein toolbar
0532 8ft (2.4m) merbein toolbar
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MERBEIN PLOUGHS 2 DISC PER SIDE WITH 7FT TOOLBAR - 0520 X2 INCL 0530

Trailed 3,000 litre pasture sprayer with 132 L/min pump and 3 section electric valve controls. Ideal for spraying pasture.
Note: infield image shows 2,500L Pasture sprayer with optional 15m Devil boom, mudguards and hydraulic lift.
Specifications:
Market: Dairy & Livestock
Tank Size (L): 3000
Connection Type: Trailed
Pump Size (L/min): 132
Height / Width / Length (mm): 2500 / 2400 / 4400
Product Weight (kg): 850
Application: Pasture spraying.
Features:
Pump: Silvan self-priming oil-backed diaphragm type with nitrile diaphragms & corrosion resistant cast anodised aluminium body. BP130/20: 132 L/min. capacity 2000kPa pressure.
Tank: Polytuff impact resistant polyethylene construction with calibrated sight line & non-spill screw down lid.
Chassis: Galvanised RHS steel construction with adjustable drawbar and operator platform.
Axle: 2m track axle with 14.9 x 24" lug tyre (450mm clearance)
Bottom Fill: Bottom fill with 2" camlock coupling.
Filter: Lid strainer, suction line filter.
Controls: 3 section Silvamatic electric controls with pressure compensating direct acting valves. In cab on/off & pressure adjustment with pressure gauge.
Flush Tank: 100L
Fresh Water: Hand wash tap fitted to flush tank.
Options:
- BP200/20 pump, 195 L/min. capacity, 2000kPa pressure
- Hydraulic drive centrifugal pump
- 5 section Silvamatic electric controls (in lieu)
- Bravo 180S automatic rate controller (in lieu)
- Bravo 180S automatic rate controller to suit hydraulic control (in lieu)
- Bravo 400S automatic rate controller with GPS guidance (in lieu)
- IBX 100 ISOBUS controller (in lieu - requires compatible in-cab console)
- Mudguards (to suit 14.9 x 24" wheels)
- Adjustable track axle (minimum 1500mm) with 11.2 x 44" Lug tyres (2500L only)
- Simplicity tandem axle with 15" Lug tyres
- 2m track axle with 31 x 13.5" Turf tyre
- 10m HD Devil boom with self levelling
- 12m HD Devil boom with self levelling
- 14m HD Devil boom with self levelling*
- 15m HD Devil boom with self levelling*
- Hydraulic lift, galvanised single hydraulic system - 10, 12, 14 and 15 HD Devil booms
- Airbag suspension & hydraulic lift (to suit HD Devil boom)
- Parallelogram/airbag suspension (to suit HD Devil boom) - no hydraulic lift
- 57L Paddock Foam Marker
- Venturi suction probe
- Silmix Chemical Hopper
- 3 Section electric over hydraulic control
- 5 Section electric over hydraulic control
* When fitting 14 & 15m HD devil boom 032-40DLAB or 032-40DLAB-3 must be added.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 3,000L TRAILED PASTURE SPRAYER

The Daken Spring Gate comes with Gate Handle, Gate anchor, gate spring and securing insulator.
Suitable for gate ways up to 5 meters. Simple to use and install.
Use 1 or more on a gate way depending on the stock you are wishing to control.
The Daken Spring Gate comes with Gate Handle, Gate anchor, gate spring and securing insulator. Suitable for gate ways up to 5 meters. Simple to use and install. Use 1 or more on a gate way depending on the stock you are wishing to control.
- Extends to 5 meters
- All in one kit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN SPRING GATE KIT - 76030D

The Feral Animal Trap is ideal for foxes and feral dogs. The Feral Animal Trap is hand made in Brisbane from galvanised steel mesh. Solid non-collapsible construction & all welds are painted with protective paint.
The trap is activated by the animal stepping on a plate which triggers the door to drop.
Length: 1,200mm
Width: 510mm
Height: 610mm cage, 840mm inc frame
Galvanized Steel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID EXTRA LARGE FERAL DOG TRAP

Specifications are shown in images.
The PF1800 high capacity pallet forks built to make life on a construction site that bit easier!
Material handling around a construction site demands a great deal of flexibility. Heavy duty construction, the precision mounting plate and various other ingenious features make our Pallet Fork attachment for the skid steer loader a must have item. The ideal solution for locations where pallet handling is needed but the site is unmade or too rough for a forklift truck. The PF1800 can hold a weight capacity of 1,800kg.
Features:
- Fully adjustable Tines with locking pins.
- Tines are fixed at the top and heel preventing bouncing while carrying loads.
- Sidestep for easy entry and exit of the cab.
- High visibility brick guard giving you good vision whilst loading and unloading - crucial in a safety conscious age.
- Auger Torque pallet fork tines are manufactured to ISO2328:2011 / AS2359.11-1995 and ISO2330:2002 / AS2359.14:2005 standards
- Auger Torque fork mounting frames are engineered and tested for strength and longevity
- Can be disassembled and packed into a compact storage space when not in use.
Options:
- Standard or Euro hook
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AUGER TORQUE 1,800KG PALLET FORKS (122CM TINES)

Linkage turbomiser 400 litre sprayer with a 140 L/min centrifugal pump and a 450mm fan. Ideal for vineyards and greenhouses. Note: spray head not included
Specifications:
Market: Horticulture. Viticulture.
Tank Size (L): 400
Connection Type: Linkage
Min PTO hp: 45
Pump Size (L/min): 140
Height / Width / Length (mm): 1150 / 1100 / 1000
Product Weight (kg): 207 (dry)
Application: Vineyards, greenhouse
Features:
Pump: CD32 centrifugal pump 140L/min constructed from toughened nylon. Stainless steel shaft & viton/ceramic seal.
Fan Size: P42E: 420 mm dia. turbine fan, 3900 rpm. Power consumed 18 kw / 35HP. P45E: 450mm dia. turbine fan, 4500 rpm. Power consumed 34 kw / 45HP.
Nozzles: Air shear.
Gearbox: Multiplication type through multi-grip, multi-vee belt and pulley, over-run free wheeling hub and oil bath fan housing.
Controls: Two sided electric on/off control with control box mounted in cabin. Rotary plate distribution regulators with 15 settings and manual pressure adjustment.
Frame: Galvanised RHS steel construction, cat II linkage.
Tank: 400L Polytuff impact resistant polyethylene construction, calibrated sight line, non spill lids, hydro chemical mixer in larger basket, lids with basket strainers, seperate in-built 18L fresh water hand wash tank.
Agitation: Bypass and pneumatic
Pressure Gauge: Protected 100mm glycerine gauge fitted at front of sprayer
Filtration: Lid strainer and suction line strainer
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 25PTO HP (P42), 45 PTO HP (P45)
Options:
- Super cannon for P42E (GT42-1)
- Super cannon for P45E (GT45-1)
- Manual turntable for Super Cannon (GT55-4)
- Hydraulic turntable for Super Cannon (GT55-9)
- Double sided diffuser head (5 outlets per side) for P42E (GT40-2)
- Double sided diffuser head (5 outlets per side) for P45E (GT45-2)
- Vineyard head - 4 heads (4x4) for P45E (GT45-11)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 400L P45E LINKAGE TURBOMISER - MIN 45PTO HP (SPRAY HEAD NOT INCLUDED)

The Auger Torque hedge trimmer is the perfect addition for excavators (1.5T 8T) and offers a variety of motor sizes to suit your application.
Attaching the hedge trimmer to an excavator provides extra-long cutting reach, gaining access to those taller trees, deeper hedges and hard to reach shrubbery.
The hedge trimmer is also ideal for cutting long grass and brush. Attaching the optional tooth extension bar provides a full 2.5m cutting length, helping you make trimming more precise, efficient and will provide yet another way to expand the versatility of your existing machines.
Specifications are listed in images.
Features:
- Suits 1.5-8T Excavators
- Bar Length 1.5m
- Extension Length 1.0m
- Variety of motor sizes
- Max cutting Ø 40mm
- Replace individual cutting teeth
- Neat & Accurate
- High Performance
- Low Maintenance
- Extreme Durability
- Hoses included
Options:
- 1m hedge trimmer cutting extension
- hedge trimmer blade (coarse)
- hedge trimmer finger
Hedge trimmer excavator hitches & skidsteer frames options:
- 25mm Pin diameter
- 30mm Pin diameter
- 32mm Pin diameter
- 35mm Pin diameter
- 38mm Pin diameter
- 40mm Pin diameter
- 45mm Pin diameter
- 50mm Pin diameter
- hedge trimmer angle mount
- hitch adjuster
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE 1.5M HEDGE TRIMMER

Find Farm Machinery For Sale in Queensland. Browse 7603 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 5'9" (1.75M) - 0182

BREVIGLIERI MEKFARMER 100 POWER HARROWS 2.46M - BREVIGLIERI - MF100-250CR, MIN 70-100HP

POLYMASTER 2,270L RAINWATER TANK (LOW PROFILE)

NOBILI 95CM TRP MULCHER (SUIT 60-150HP)

JOHN BERENDS 8FT PASTURE HARROWS - 0403

JOHN BERENDS MERBEIN PLOUGHS 2 DISC PER SIDE WITH 7FT TOOLBAR - 0520 X2 INCL 0530

SILVAN 3,000L TRAILED PASTURE SPRAYER

DAKEN SPRING GATE KIT - 76030D

FARM-AID EXTRA LARGE FERAL DOG TRAP

AUGER TORQUE 1,800KG PALLET FORKS (122CM TINES)

SILVAN 400L P45E LINKAGE TURBOMISER - MIN 45PTO HP (SPRAY HEAD NOT INCLUDED)

AUGER TORQUE 1.5M HEDGE TRIMMER

Farm Supplies Machinery & Equipment

Dealer Address