Farm Supplies Machinery & Equipment

A spreader bar is a type of hook lifting device used for picking up large and heavy loads. It distributes the load of lift across more than one point increasing stability and decreasing the loads applied during hoisting.
With an easy 4-in-1 bucket pickup design, it is the perfect device for spreading and levelling soil to attach to your excavator and mini loader. These bars are built to suit any type of hitch and for all makes and models of excavators up to 2.5 tonne.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE 2100MM X 1800MM SPREADER BAR

3,000L Turbo Scram Trailed 3 Row Tri-Wrap: Includes sprayheads 6 x 320mm fans, Hydraulic drive stainless steel pump, automatic spray rate controller, self contained hydraulic drive system, tandem suspension axle
Specifications:
Market: Horticulture.
Tank Size (L): 3,000
Connection Type: Trailed
Min PTO HP: 80
Pump Size (L/min): 350
Application: Vineyards
Features:
Head: Two row spraying head: 28 venturi air shear adjustable nozzles with individual metering and on/off taps. Three row spraying head: 42 venturi air shear adjustable nozzles with individual metering and on/off taps. Left & right arms are independent hydraulic folding with adjustable width & centre frame. Boom frame is galvanised.
Pump: Stainless steel, hydraulic drive centrifugal pump, 350 L/min. Stainless steel shaft and Viton/ceramic seal. Driven by tractor remotes.
Fan Size: 320 mm turbine fan, one per air tube, 3600 rpm. Power consumed 29 kw / 38HP
Hydraulic Control: Hitch mounted hydraulic power pack with; 40L oil reservoir with cartridge particulate filter, motors fitted with case drain, hydraulic distribution block incorporates anticavitation and pressure relief valves, 12V oil cooler
Nozzles: Air shear.
Controls: Electric section valves with Bravo 180S automatic rate controller. Large 100mm pressure gauge.
Frame: Galvanised steel chassis, linkage hitch fitted with hydraulic power pack
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and hand wash tank. (205L flush tank on 3000L)
Agitation: Venturi agitator.
Filtration: Lid strainer and large capacity suction filter.
Wheel Equipment: Tandem suspension axle with 10 x 15" tyres (3000L) or 11.5 x 15.3" tyres (4000L).
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 65 PTO HP (2 row), Minimum 80 PTO HP (3 row).
Options:
- Bravo 180S spray rate controller with hydraulic controls (in lieu) (J99-180)
- IBX 100 ISOBUS controller (in lieu - requires compatible in-cab console) (J99-181)
- Hydraulic row width/height adjustment
- Hydraulic pump driven through power pack (D99-185)
- 100L flush tank (to suit 4000L) (J99-112)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 3,000L (3 ROW) TRAILED TURBO SCRAM TRI-WRAP - MIN 80PTO HP

CBM Lower Link Hook Repair Kit. Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CBM LOWER LINK HOOK REPAIR KIT (CAT 2S)

Standard Bucket 2000 series - 1.20m (No CX Mounts)
The standard or general purpose (GP) bucket is suitable for routine operations such as earth moving and scooping. The standard bucket is fitted with the following to ensure that the bucket stays durable under intense conditions:
Features:
- Stiffening rib
- Wear plates
- Reinforced ends
- Optional teeth upgrade to enhance loading or material handling applications.
Specifications:
- Width (m): 1.2m
- HP Range: 15-24
- Struck Capacity (m3): .01
- Rated Capacity (m3): 0.12
- Dimensions LxWxH (mm): 1240x450x430
- Weight (kg): 45
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER BUCKET STANDARD 1.2M - 15-24 HP RANGE

The Nobili mulcher TRP 95, 120, 145, 175 are provided with pick-up is a mounted machine that fits on the three-point linkage of the rear hydraulic lift of the tractor.
Through the pick-up device the machine picks up the pruning remains, lifting and carrying them inside the mulching chamber where they are cut and then put down on the ground through calibrated holes of the frame. In working position it is supported by steering wheels or by the roller.
The 8 rows rotor, provided with hammers, ensures a more regular rotation, less vibrations, low power requirement and high working speeds in every condition. The double output gearbox with built in overrunning clutch ensures sturdiness and reliability.
The mulcher has been constructed in compliance with EC Regulations.
Specifications:
Tractor Connection: Linkage (Cat II, floating top link)
Connecting position: Rear
Engine speed rpm: 540
Tractor horse power HP: 80-120, KW: 59-88
Cast Hammer Blade: 20
Working Width: 1450mm
Overall Width: 1711mm
Weight: 950kg
Features:
Suggested Use: Mulcher suited to stony ground with pick up front for green pruning's to 100mm.
Construction: High profile, adjustable tailboard, two mulching bars and filter grid.
Control: Fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Skids.
Options:
- Hydraulic pickup
- Roller
- Front wheels
- Reversible model (TRP175 only)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 1.4M TRP MULCHER (SUIT 80-150HP)

Suitable for ROPS and CAB (optional).
Titan products like Burder products are made with the same principles in mind. The products are built to be tough, efficient and suits even the most budget conscious.
Specifications (refer to images to see A, B, C, D & E):
Front Tyre Max: 8.3x16
Volume: 0.22m³
Tractor HP: 20-35
Bucket Width: 1.35m
Rated Capacity (std Bkt): 550kg
A. Lift Height to Pin: 2100mm
B. Dump Height: 1540mm
C. Dig Depth: 70mm
D. Crowd Angle Ground Level: 38° Max Crowd Angle: 57°
E. Dump Angle: 48°
FEL Weight Incl Std Bucket: 300kg
Features:
Mechanical Self Level
2 Bank Valve and Joystick Control (cable for CAB Tractors)
Adjustable Level Indicator
Quick Detach Loader
Gravel Bucket
Rams Horns Bump guard (Option for Full Mesh Grill Guard in Lieu of Rams Horns)
Choice of Titan 2 Pin Euro, or Titan "Burder" Quick Change at no Extra Cost
Plated Greasable Pins
Australian Made
2 Pack Epoxy Paint
Tractor Colour or Charcoal Paint Scheme
12 Month Limited Warranty
Options:
2 circuit remote (ROPS and CAB)
Electric front remote (1 circuit)
Hydraulic quick coupler (4 port dump line single QRC)
Full Mesh Grill Guard in Lieu of Rams Horns
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 3300 - 1.35M TITAN FRONT END LOADER (20-35HP)

Key Features:
- Cutting Width: 6.2m
- Transport Width: 2.8m
- Five rotors with 30 heavy-duty blades
- 250hp input gearbox
- Slip clutch protection
- Hydragas suspension with walking axle
- 7-year gearbox warranty
The Multicut 650 is boosted with additional output capability, enabling the comfortable clearance of more than 8 hectares per hour. A walking axle design is standard across the full width of the machine delivering exceptional ground contour following and reduced shock loading in harsh field conditions. Wider wheels are also fitted to add additional comfort and improved performance.
Renowned durability is built into this mower and the evenness of spread from the five rotors is unrivalled leaving a clean finish and high output unmatched by competitive three rotor machines of the same width. With a six gearbox driveline, each with slip clutch protection, the power is evenly spread to deliver exceptional reliability and durability whilst allowing enhanced forward speeds and fuel efficiency.
Features:
- Reinforced mega strength deck structure
- Built in shock absorbs
- LED light kit
- Full width walking axle
- Full width front & rear safety chains
- Heavy duty industrial tyres (wide)
- Premium long life shaft drive
- Universal drawbar for high or low towing
- Adjustable levelling tie bars
- Hydraulic wing lift and support
- Mechanical wing float support
- Full length side skids
- Slip clutch protection
- 111 HP rotor box
- Anti-scalp disc
- Heavy duty winged up draught blades
- 250 HP splitter box
- Integrated seal protector
- Includes carrier & hardware for easy fitting of starcut
Specifications:
Machine weight (with front and rear single chain guards): 2,850kg / 6,283lbs
Hitch: Multi-positional drawbar
Cutting width: 6.28m / 247"
Working machine width: 6.47m / 255"
Transport machine width: 2.70m / 106"
Maximum working length: 5.07m / 200"
Transport length: 4.93m / 194"
Deck height (underside of deck to skid): 0.23m / 9"
Transport height: 2.90m / 115"
Cutting height: 25mm - 210mm (1" - 8 1/4")
Cutting capacity: 100mm / 4"
Recommended tractor hp: 90hp / 67kW
Wing working angles: 45 degrees up / 15 degrees down
Power take-off speed: 1,000rpm
Gearbox (splitter): Cast iron housing
Gearbox (rotor gearboxes (x5)): Cast iron housing
Input shaft: 1" 3/8 Z21 or Z6 SFT 8 tractor end
Gearbox oil capacity (splitter gearbox): 2.7L / 4.7 pints
Gearbox oil capacity (centre + inner rotor gearboxes (x3)): 2.1L / 3.7 pints
Gearbox oil capacity (outer rotor gearboxes (x2)): 1.3L / 2.3 pints
Deck construction: All welded construction
Deck material thickness: 6mm (1/4")
Side skirt material thickness: 5mm (3/16")
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish (outer wing rotors): 5mm (3/16") round pan with blade holder bar
Blades (x15): 12mm (1/2") 30 carbon boron hardened and tempered. Free swinging high lift - low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed (1,000rpm): 79mps / 15551fpm
Driveline: ASAE Category 6
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x8): 21x9 14 PLY optional wider pneumatic tyre with steel hub
Front guard: Single chain guards on each deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

Pro Anvil Lopping Head.
This heavy duty lopping head has a 40mm cutting capacity.
The pruning head can be adjusted for the ideal cutting angle.
Use with any Wolf handles.
Can also be used with ARS pole and adaptor.
Replacement blades and other spare parts available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WOLF PRO ANVIL LOPPING HEAD

The Wiedenmann Terra Folding Rake s a high-performance verticutting harrow, engineered for heavy-duty, continuous use on natural and artificial turf.
Designed to remove thatch, dead plant material, and surface roots efficiently, it ensures healthy, resilient playing surfaces while maintaining high area coverage. Its foldable design allows for wide working widths, offering flexibility and convenience for larger maintenance tasks.
Features:
- Effective Thatch Removal: At travel speeds of 10 to 15 km/h, the parallelogram-guided scarifying tines vibrate aggressively to lift and remove thatch, placing it on the surface for easy collection.
- Optimised Tine Arrangement: Four rows of tines ensure blockage-free scarification between individual tines, delivering consistent results across the entire working width.
- Hydraulic Folding Mechanism: The two-part unit is easily moved from working to transport position via hydraulic cylinders, making it safe and simple to fold for transport or storage.
- Wide Working Widths: Available in 3.50m and 4.60m working widths, the foldable design provides high coverage efficiency without sacrificing precision.
- Durable Construction: Built for heavy-duty, continuous use, the Terra Rake Folding combines rugged stability with longlasting performance, ideal for professional turf maintenance.
- Tractor Compatibility: Designed for rear 3-point linkage, it can be integrated easily with a range of tractors for flexible operation.
Working Width = 3.5m
Weight = 560 kg
Min HP = 40 hp+
Optional:
1202435 - Load-Relieving Complete Kit Reduces Tine Penetration (2 Required)
1254205 - Lighting Kit
5239600 - Terra Rake 350 - Additional Year Warranty Extension (24 Months Total)
5249600 - Terra Rake 460 - Additional Year Warranty Extension (24 Months Total)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WIEDENMANN 3.5M FOLDING TURF RAKE (NATURAL & ARTIFICIAL) MIN 40HP+

NR1200 Netting Roller.
Made to order - allow 4 weeks.
The NR1200 Netting Roller is designed to mount to the front of a skid steer loader or tractor front end loader.
The Netting Roller is heavy-built, designed to handle all types of fence and can even pull netting out of the ground and roll it up.
With a capacity of 1200mm, the Netting Roller is suitable for winding up standard farm fencing that has the star posts removed.
For higher fences or to roll up a fence with the star posts still attached, we also manufacture an 1900mm model.
Netting Rollers are an order item, once an order is placed we will commence construction with a 3-4 week turnaround.
This listing is for a blank backed model with no mounting plate, please see our other listings for details on custom mounting plates available.
Shipping weight 280kg nominal, varies depending according to mounting plate.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

WALTERS FENCING NR1200 NETTING ROLLER

Medium duty offset discs ideal for all agricultural and cropping operations. With hydraulic gang and levelling control.
Manufactured in Italy.
Specifications:
Working width: 3700mm
Discs: 32
Weight: 2900kg
Features:
Hydraulic gang adjustment ( Separate ram for both gangs)
Manual levelling adjustment (Optional hydraulic)
12.5/80-15 PR14 tyres
Hydraulic drawbar offset (Optional manual)
660mm scollped discs
6mm thick disc blades
230mm disc spacing
8 bearings (double taper roller) GB280-320
12 bearings (double taper roller) GB370
Bearing protectors
40mm square shaft
150 x 100 x 8mm chassis and gang beam
Swivel hitch
Options:
Manual drawbar offset
Hydraulic levelling adjustment
Models:
GB280 2.8M 24 DISCS 2280kg
GB320 2.8M 28 DISCS 2550kg
GB370 2.8M 32 DISCS 2900kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

GB 3.7M, 32 DISCS (110-150HP) MEDIUM DUTY OFFSET DISCS

Sureweld Aluminium Walk Boards are built for use in a broad range of industries requiring portable foot access Ramps. Low profile side stiles with lengths and widths designed for the most common truck chassis sizes, these Walk Boards are particularly useful to the Motor Body Building Industry.
Walk Boards provide a lightweight, safe and convenient solution for manual handling and trolley work in a broad range of applications including:
Maintenance Vehicles, Removalists, Food Transport Vehicles, Events Organisers, Handymen, Repair Vehicles, Site Maintenance Services, Party Hire, Cleaning Services, Concrete Cutting Services, Rental Trucks, Charity Organisations, Commercial Equipment Hire, Delivery Vans, Taxi Trucks, Light Industrial Equipment, Animal Transport, Demonstration Vehicles, and Emergency Response Vehicles.
Specifications:
Rated Capacity: 300kg
Walk Board Mass: 44kg
Walk Board Length: 3.5m
Walk Board Width: 790mm
Walk Board Depth: 75mm
Features:
Tread Surface of Walk Boards.
Steel Pin Connection.
Foot matching Ramp gradient.
Models:
WB2772 - 300kg Rated Capacity, 33kg Walk Board Mass, 2.7m Walk Board Length, 720mm Walk Board Width, 75mm Walk Board Depth
WB2782 - 300kg Rated Capacity, 36kg Walk Board Mass, 2.7m Walk Board Length, 820mm Walk Board Width, 75mm Walk Board Depth
WB3572 - 300kg Rated Capacity, 41kg Walk Board Mass, 3.5m Walk Board Length, 720mm Walk Board Width, 75mm Walk Board Depth
WB3579 - 300kg Rated Capacity, 44kg Walk Board Mass, 3.5m Walk Board Length, 790mm Walk Board Width, 75mm Walk Board Depth
WB3582 - 300kg Rated Capacity, 45kg Walk Board Mass, 3.5m Walk Board Length, 820mm Walk Board Width, 75mm Walk Board Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 3.5M, 300KG CAPACITY (79CM WIDTH) CLIMAXX WALK BOARD SERIES LOADING RAMP

Find Farm Machinery For Sale in Queensland. Browse 7523 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

AUGER TORQUE 2100MM X 1800MM SPREADER BAR

SILVAN 3,000L (3 ROW) TRAILED TURBO SCRAM TRI-WRAP - MIN 80PTO HP

CBM LOWER LINK HOOK REPAIR KIT (CAT 2S)

BURDER BUCKET STANDARD 1.2M - 15-24 HP RANGE

NOBILI 1.4M TRP MULCHER (SUIT 80-150HP)

BURDER 3300 - 1.35M TITAN FRONT END LOADER (20-35HP)

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

WOLF PRO ANVIL LOPPING HEAD

WIEDENMANN 3.5M FOLDING TURF RAKE (NATURAL & ARTIFICIAL) MIN 40HP+

WALTERS FENCING NR1200 NETTING ROLLER

GB 3.7M, 32 DISCS (110-150HP) MEDIUM DUTY OFFSET DISCS

SUREWELD 3.5M, 300KG CAPACITY (79CM WIDTH) CLIMAXX WALK BOARD SERIES LOADING RAMP

Farm Supplies Machinery & Equipment

Dealer Address