Farm Supplies Machinery & Equipment

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3980kg
No. of Bearings: 20
No. of axles: 8
Cutting width: 5.26m (17ft 3inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 44 PLATE X 24 INCH DISCS - 0976

The Wiedenmann Terra Core M6 is a high-performance walk-behind aerator, purpose-built for golf greens, tees, and fine turf areas where precision matters most.
Delivering powerful aeration without the need for large machinery, it combines efficiency, control, and ease of use ideal for high-quality turf maintenance in confined or sensitive spaces.
Features:
- Deep Aeration Performance: Penetrates up to 15 cm, relieving compaction and promoting deeper root growth for improved water and nutrient uptake.
- Precision & Consistency: Intelligent two-wheel drive ensures accurate hole spacing and reliable performance, even on slopes, across a 132 cm working width.
- Compact Productivity: Walk-behind design delivers strong output with excellent manoeuvrability perfect for greens, tees, and tight-access areas.
- Smooth Operation: Proportionally controlled steering and an integrated gauge roller maintain traction, control, and consistent working depth over uneven ground.
- Quick Adjustments: Central depth adjustment and delay mode allow fast, precise setup and accurate start/stop positioning around obstacles.
- Minimal Downtime: Replaceable tine holders enable quick, single-screw tine changes to keep you working efficiently.
- Operator Comfort: Ergonomic one-handed operation and integrated storage improve ease of use and convenience on the job.
- Optional Add-On Versatility: Available with trailing roller, windrow deflector, turf retainer, and lighting kit to suit a range of conditions and applications.
Weight = 890 kg
Optional Items:
1237950 - 4 x 12 mm tine holders (6 required in total)
1237960 - 4 x 19 mm tine holders (6 required in total)
1237970- 6 x 12 mm tine holders (6 required in total)
1237973 - 8 x 8 mm tine holders (6 required in total)
1290068 - Turf Retainer Set 6x6
1290069 - Turf Retainer Set 8x6
12990077 - Spring Loaded Roller
12990088 - Core Swath Board
1290066 - Lighting System
1290088 - Set of Coring Tines
11049600 - Additional Year Warranty Extension (24 months total)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WIEDENMANN 1.3M WALK BEHIND AERATOR

Our rectangular balers are machines easy to use and ideal for small and medium-sized farm users. They are available with double twine binding,
They produce dense and well-shaped bales preserving forage qualities and meeting the specific requirements for animal feeding.
This 900 model has the cardan shaft transmission.
All machines are provided with light kit for road circulation.
Automatic oil lubricated system is standard.
Hydraulic Pickup Lifting and Bale Counter means more productivity and less time wasting. Using the hydraulic pick up lifting, you can adjust the height adapting it to the soils conditions and you do not have to get off the tractor. So you will save time and gain ease of use.
All machines are standard equipped with bale counter.
Adjusting Rear Springs - The bale density can be adjusted manually by using two adjusting springs, which allows the operator to choose the pressure on the product depending on its needs and then to reach the bale weight needed.
Bale size - min of 30 cm up to 135 cm
Working length = 640 cm
Transport length - 560 cm
Weight = 2,100 kg
Pick up width = 180 cm
Requires - 45hp (540 rpm)
Hitch type - Towing eye
Standard Equipment:
- Bale counter
- Hydraulic lifting of the pick-up
- Bale density adjustment: 2 springs
- Towing eye hitch
- Two-twines binder
- Binder cleaning fan
- Grease lubrication system on 5 points
- Tow hydraulic shiftment
- Cardan transmission
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ENOROSSI SMALL SQUARE BALER (UP TO 135CM) 4.4FT

The award winning range of Cyclone Mowers has been designed to do the work of a flail mower but requires a fraction of the power and fuel that a flail mower would consume.
MJ30-630 Mulching Slasher with rear wheels ideal for macadamias (140-190hp)
6.3 metre working width
3PL
9 rotors
weight 1875kg
140-190HP
Ideal Macadamias, also stubble, pasture, solar farms
Twin wing - folding
Rear wheels in lieu of rollers
Mulch and slash
Model:MJ30-630WRW
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR 6.3M MJ30 MULCHING SLASHER INC REAR WHEELS 140-190HP

Suitable for raking, turning and spreading hay crops, silage and grain crop stubble.
Construction: Simple robust construction requiring minimal maintenance.
Drive Line: Ground drive.
Control: Single set hydraulics via tractor remote.
Attachment: Cat. II clevis to tractor drawbar.
Windrow Width: 3 6ft / 0.9 1.8m
Specifications:
Type: Trailed V with Dual Hydraulic Kicker Wheels Standard
Working Width (m): 9.4
Product Weight (kg): 2400
Number of rake wheels (L/R-Splitters): 8/8 +2
Tynes Per Wheel: 40
Rake wheel diameter: 1400mm
Transport width: 2.5m
Number of Ground Wheels/Size: 6 x 205-75/15
Note: Hayrakes Delivered Unassembled
* Maximum working width and speeds depend greatly upon product raked, volume and general conditions.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SITREX HYDRAULIC TRAILED MAGNUM V HAYRAKES - 8L/8R+2 RAKE WHEELS - SITREX - HR-MK16

The Nobili RMS series mulchers are a heavy duty, robust machine ideal for mulching on wide areas. The RMS series is suitable for all broadacre stubble including rice, cotton, wheat and corn as well as pasture mulching applications.
Features:
Suggested Use: Grass or stubble and grass prunings up to 100mm in diameter for tractors up to 450HP.
Construction: High profile, adjustable tailboard and two mulching bars.
Control: Fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys. Dual drive with 5 rows of blades in special formation.
Attachment: Cat. III and IV quick hitch, three point linkage.
Height Control: Four rear wheels.
Specifications:
Connection Type: Linkage
Blades (Y with Straight): 144/72
PTO RPM: 1000
Working Width (mm): 6076
HP: 200-350
Product Weight (kg): 3650
Width / Height / Depth (mm): 6455 / 846 / 1600
NOTE: There is a surcharge for machinery assembly and blade changes (Excludes price of blades).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI RMS STUBBLE MULCHERS 6.07M - RMS610/012

3,000L Paddock Pak. BP130/20 pump, 3 section electric valve controls, 18m boom.
Specifications:
Tank Size (L): 3,000
Connection Type: Trailed
Pump Size (L/min): 132
Features:
Pump: Silvan self-priming oil backed diaphragm pump. BP130/20: 132 L/min. capacity 2000kPa pressure.
Boom: Hydraulic lift, fold and tilt with parallel arm boom suspension, nitrogen accumulator and spring-loaded breakbacks. Galvanised boom with stainless steel spraylines. Minimum 3 sets of hydraulic remotes required.
Controls: 3 section Silvamatic electric controls with pressure compensating direct acting valves. In cab on/off & pressure adjustment with pressure gauge.
Tank: Polytuff impact resistant polyethylene construction with calibrated sight line & non-spill screw down lid.
Flush Tank: 100L
Frame: Galvanised RHS steel construction with adjustable drawbar and operator platform.
Agitation: 2 stage agitation. Bypass action and Venturi agitation.
Filtration: Lid strainer, suction line filter.
Wheel Equipment: 2m track axle with 14.9 x 24" lug tyre
Bottom Fill: Bottom fill valve with camlock coupling.
Options:
- BP200/20 pump, 195 L/min. capacity, 2000kPa pressure
- Hydraulic drive centrifugal pump
- 5 section Silvamatic electric controls (in lieu)
- Bravo 180S automatic rate controller (in lieu)
- Bravo 180S automatic rate controller to suit hydraulic control (in lieu)
- Bravo 400S automatic rate controller with GPS guidance (in lieu)
- IBX 100 ISOBUS controller (in lieu - requires compatible in-cab console)
- Mudguards (to suit 14.9 x 24 wheels)
- Adjustable track axle (minimum 1500mm) with 11.2 x 44 Lug tyres (2500L only)
- 57L Paddock Foam Marker
- Venturi suction probe
- Silmix Chemical Hopper
- 3 Section electric over hydraulic control
- 5 Section electric over hydraulic control
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 3,000L PADDOCK PAK TRAILED SPRAYER (18M BOOM)

This rear mounting hydraulic folding six metre mulcher is German engineering at its best.
Ideal for both pasture and stubble management along with general wide area mulching.
Manufactured from high quality QSt/E Steel with Headstock Cat. II & III for rear mounting.
Recommended for tractors 140-250HP.
Four rubber trailing wheels with 360° swivel.
Features:
Manufactured from High Quality Qst/E Steel with Headstock Cat.II & III for rear mounting.
Four rubber wheels, 360° swivel, height adjustable, 23X10.50-12.
Gearbox with integrated over run clutch for 1000 r.p.m.
Automatic belt tensioning.
Hood wear plates.
Hydraulic transport safety lock at an angle of 90°.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Well balanced spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Patented removable shredding bar System : Shark Fin.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the wheels guarantees perfect contour following and an even quality of cut.
Two single acting spool valves requested.
PTO shaft with cap bottom lubrication.
Warning signs and lights (LED mounted).
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Scrapper rail for MU-M/F 600 Vario (2 units must be ordered for entire working width).
Additional protection device for heavy duty work in extremely stony conditions.
Second screw-type short chopping bar system: "shark-fin design" - A Muthing patent (2 units must be ordered for entire working width).
Hydraulic powered central strip mulcher.
Operating hours counter with sensor, time recording via angular momentum.
Quick-hitch adapter, Cat. 3.
Model:
MU-M600 41.1 (4 Wheels) 6000mm 250 HP WW 6000mm Overall width 6200mm Weight 2500kg Flails 52
MU-M600 41.2 (Support Rollers) 6000mm 250 HP WW 6000mm Overall width 6200mm Weight 2500kg Flails 52
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-M600 MULCHER - HYDRAULICALLY FOLDING INC 4 SUPPORT WHEELS

The compact design of this chipper makes it a versatile choice, suitable for the hire industry or arboriculture contractors alike. Simple and safe controls makes it easy to operate for all, while its powerful performance exceeds the expectations of the most demanding user.
An industry leading massive 7 x 13 wide infeed with single feed roller provides unbeatable feeding power. The C25 features a directly activated hydraulic variable speed feed roller and electronic control system, the adjustable auto feed system reverses the feed rollers to optimise engine recovery speed, therefore maximising output.
Engineered in New Zealand to last a lifetime, delivering on the tough expectations of the Australasian market. Made of steel and finished with a durable powder coated finish with zinc shield rust protection delivers longevity. Powered by the reliable Honda GX690 V-twin petrol engine and Parker hydraulics quality components to match Hansas superior standard.
The compact and lightweight design allows the chipper to be moved around unhitched with ease by one person. With a weight from 780kg, this chipper can be towed by any vehicle. Unbeatable weight to capacity & power ratio, well balanced with low centre of gravity.
Everything is accessible for routine servicing and maintenance by removing two bolts on the housing. The double sided knives and easily adjustable anvil makes for simple maintenance. If advice is required our specialist service team is here to help you get the best from your Hansa.
Specifications
Max Capacity - 160mm (6")
Engine Type - Honda GX690
Max Power - 25HP
Fuel Type - Petrol
Fuel Tank Size - 33L
Hydraulic Tank Size - 23L
Start Type - Electric
Inlet Chute Size - 330 x 178 mm
Knife Quantity - 2 (reversible)
Knife Size - 200 x 116 x 16 mm
Knife Material - A8 Modified Tool Steel
Cutting Disk Dimensions - 650 x 20mm
Cutting Disk Weight - 81kg
Cutting Disk Speed - 1,800 RPM
Belt Drive - 3x B Section
Hydraulic feed size - 220mm roller
Wheels - 13" rim (low profile)
Dimensions (l x w x h) 3,270 x 1,580 x 2,165 mm
Weight (depends on options) 780 - 885 kg
Outlet Chute Height - 2,165 mm
Outlet Chute Type - 360 Swivel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

HANSA C25 WOOD CHIPPER (25HP - 160MM CAPACITY)

7 leg Subsoiler with tines & discs up to 450mm working depth. Made in new Zealand.
304 Auto Reset Panerazers are the ultimate sub soiling machine. Especially when the soils to be aerated are heavy & full of obstructions.
Being auto reset makes your sub soiling job seamless as the legs simply lift over any obstruction & immediately reset automatically so you can continue aerating your soils without stopping. Leaf spring reset has a great advantage over rams, not only do they require less maintenance, but the legs are at the highest point of resistance while in the ground & resistance reduces as they lift.
This ensures the legs do not tip falsely but ensures they do clear obstructions when struck.
Rata Panerazer legs are in a 'V' formation. This reduces drag between the legs making it easier to pull and uses less fuel. V formation also means the legs leave the ground independently at the headlands which eliminates 'heaving'.
They feature a heavy duty build RHS main frame construction with reinforcing to cope with hard conditions. The wear protected legs are also securely bolted into the reset mounts.
Working depth is easily controlled via the rear roller setting and tractor 3 point linkage. The rear roller is secured to the main aerator frame with heavy machine pins.
The rear roller is securely mounted into a sealed bearing to ensure smooth operation with minimal wear. The roller is also kept clean by a scraper mounted just behind it.
An innovative modular leg, foot & point assembly provides maximum flexibility of parts. Cast point provides extra wear protection in the form of bevelled hard wearing plate.
Winged feet are an option on the Rata Panerazer range (see photos attached). These provide extra ground lift when sub soiling to create greater subsoil disturbance.
The auto reset system is powered by heavy duty leaf springs mounted on each leg. Leaf springs reset immediately after tripping & clearing the obstacle unlike other reset systems such as hydraulic. This tension is easily adjusted via the 'tension bolt' mounted on the leg. This enables the operator to adjust the tension to the ideal level required for the ground they're operating in. The tension adjustment spanner is included with the implement.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 7 LEG (AUTO RESET) SUBSOIL CULTIVATOR (150HP RECOMMENDED)

Heavy duty double drive fixed rotary hoe suitable for tractors up to 280 hp.
Specifications:
Actual Width: 413cm
Working Width: 391cm
Required HP: 180-280hp
Weight: 2000kg
No of Blades: 90
Features:
Rated up to 280 hp
Unique central split gearbox system for high horsepower loading and efficient torque distribution
Two speed side gearboxes with available gear speeds of: 208,230,260,284,310,340,375,410
Swinging lower links
Gear side drive
Side drive shafts with automatic safety clutches (CAM)
80 x 8mm 'L' blades
6 blades per flange
250mm working depth
Side skids or rear rollers with hydraulic adjustment
Adjustable , spring loaded tailgates
Options in Lieu of Standard:
Rotor Options
Double flange rotor (c/w 10mm blades)
Spike rotor spike (30x30x195)
Anti-pan rotor (10mm straight blade)
Roller Options
Cage roller (500mm diameter) with hydraulic adjustment
Packer roller (555mm diameter) with hydraulic adjustment
Models:
TIGER 280DD-400 391cm Working Width 180-280hp 2000kg 90 L blades
TIGER 280DD-450 441cm Working Width 200-280hp 2120kg 102 L blades
TIGER 280DD-500 491cm Working Width 220-280hp 2240kg 114 L blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.91M (180-280 HP) TIGER ROTARY HOE

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3680kg
No. of Bearings: 16
No. of axles: 8
Cutting width: 4.33m (14ft 3inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 36 PLATE X 24 INCH DISCS - 0974

Find Farm Machinery For Sale from $50,000 to $100,000. Browse 170 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $50,000 to $100,000

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 44 PLATE X 24 INCH DISCS - 0976

WIEDENMANN 1.3M WALK BEHIND AERATOR

ENOROSSI SMALL SQUARE BALER (UP TO 135CM) 4.4FT

MAJOR 6.3M MJ30 MULCHING SLASHER INC REAR WHEELS 140-190HP

SITREX HYDRAULIC TRAILED MAGNUM V HAYRAKES - 8L/8R+2 RAKE WHEELS - SITREX - HR-MK16

NOBILI RMS STUBBLE MULCHERS 6.07M - RMS610/012

SILVAN 3,000L PADDOCK PAK TRAILED SPRAYER (18M BOOM)

MUTHING MU-M600 MULCHER - HYDRAULICALLY FOLDING INC 4 SUPPORT WHEELS

HANSA C25 WOOD CHIPPER (25HP - 160MM CAPACITY)

RATA 7 LEG (AUTO RESET) SUBSOIL CULTIVATOR (150HP RECOMMENDED)

CELLI 3.91M (180-280 HP) TIGER ROTARY HOE

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 36 PLATE X 24 INCH DISCS - 0974

Farm Supplies Machinery & Equipment

Dealer Address