Farm Supplies Machinery & Equipment

Cross Shaft.
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX CROSS SHAFT (HYDRAULIC LIFT)

Bale Frame specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX BALE FRAME - 2 X M22 X 1,100MM - CONUS 1 TINES

Gate Valve specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX GATE VALVE WITH OILDYNAMIC RAM WITH SPRING - DOUBLE FLANGED HD 6"

Counterweights are important in maintaining the stability of the tractor when using front end loaders. With a front end loader fitted onto a tractor, the centre of gravity shifts forward. The centre of gravity is further amplified when the loader lifts a load thus putting pressure on the tyres, axle and rims.

To eliminate such risks, a 3 point linkage should be used. The counterweight is hooked up with a 3 point linkage set behind the rear axle. This is the best method to improve stability and it reduces the amount of pressure placed on the tyres, axle and rims.

BURDER 200KG CONCRETE COUNTER WEIGHT (3PL)

600MM 4 Series auger up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 600MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD - HYDRAULIC DRIVE

375mm - 3 Series Auger up to 5T for 3 point linkage. Light conditions - Earth.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: 3PT Linkage
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 375MM AUGER (LIGHT- EARTH) FOR 3 POINT LINKAGE

A hard working, light weight generator that is ideal for small appliances (e.g. TVs, bar fridges) and small hand tools (e.g. drills and jigsaws).
This Gentech EP3400HSR 3.4 kVA portable generator will be the hardest working tool on your worksite - its your top choice for powering lights, pumps, and hand tools around the farm and job site.
Not to mention the reliability and quality that comes from a Honda GX200 engine. This one compact package is packed with everything you need for over two hours of operation running on a single 3.6 litre tank at 80% load. Need power for longer? Simply add on the 8.5 litre long-range fuel tank for extra running time.
The design incorporates a recoil start and 2 x 15 Amp outlets. It has a noise level of only 67 dBA and weighs in at only 40 kg. Add on the lifting bar kit, wheel kit or wheelbarrow kit for easy transportation from your ute to the job site.
The package is complete with a 2 year generator warranty backed by a national service network. The Honda engine comes with a 4 year warranty.
Specifications:
Power Rating: 3.4 kVA
Model Rating 0.8pf @ 50Hz: 3.4kVA
Alternator Rating: 3.4 kVA
Engine Model: Honda GX200
Phase: 1-Phase
Starting System: Recoil
Fuel Tank Capacity: 3.6 L
Noise Level @ 7m: 67 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 1.55 L/hr
Operation Hours @ 80% Load: 2.32 hrs
Fuel Type: Petrol
Diam.: 650 x 460 x 415 mm (L x W x H)
Weight: 40 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 3.4 KVA PETROL GENERATOR (240V ENGINE POWERED)

190L medium Longline Feed trough. 2400mm (8') long x 360mm (14") wide. For sheep & goats.
Features:
Medium Troughs (300mm) - recommended for sheep, goats etc
Smooth interior with a 2" drain bung for easy cleaning.
Peg down points at each end
Available as either feed or water troughs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 190L LONGLINE FEED TROUGH

Grow Warm Flexible Heat Pad 1400mm x 400mm, 150W (with Thermostat).
This flexible propagation heat pad is manufactured in Australia. The pad is made from tough polyurethane to give water resistant properties combined with durability and flexibility. Designed for the horticultural and hydroponic industry.
Specifications:
Dimensions: 1400mm x 400mm
To Suit Number of Standard Seedling Trays: 4
With Thermostat: Yes
Thermostat Temperature Range: 0°C - 40°C
Watts: 150W
Features & Benefits:
- 240 Volt - just plugs into your power outlet.
- Low wattage
- Superior durability, can hold heavy loads.
- Washable
- 1 year guarantee
- Flexible
- Quality Product
- Economical
- Double insulated - safe for use
- UV resistant
- Water resistant
For Horticultural Use:
Soil temperature is crucial to an optimum growing environment, whether you are germinating lettuce seeds or propagating orchids. These fully portable pads produce spectacular results in higher seed/cutting germination and vigorous root development on cuttings and plants. The pad is of the highest quality and is economical to run. We don't recommend that the heat pad is wrapped or completely covered with insulating materials.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

REDZONE HEATING 150W - FOUR TRAY - GROW WARM FLEXIBLE HEAT PAD (WITH THERMOSTAT)

300mm - 1 Series Auger for 1 Man Borer.
Light conditions - Earth.
A1 soft earth
Bladed teeth for soft earth/clay.
Earth Auger for general purpose drilling.
Designed to reduce auger jam, the A1 auger features its cutters on one side as well as a restrictor plate to reduce overrun.
Available in earth or tungsten carbide (TC), providing longer wear life and greater cutting performance. Not suited for rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
Specifications:
- Drilling Conditions: Soft earth
- Hub: Stihl 1 man Style
- Overall Length: 960mm
- Flights (Lead): 6mm
- Flights (Carry): 6mm
- Teeth: TS
- Pilot: PS
- Ideal Drives: One man borer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 300MM AUGER (LIGHT- EARTH) FOR 1 MAN BORER

375mm - 3 Series Auger up to 5T for 3 point linkage. Heavy conditions-(MFT) Multi Facet Tungsten-Hard ground.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 375MM AUGER (HEAVY-HARD GROUND) FOR 3 POINT LINKAGE

350mm - 3 Series Auger up to 5T for 3 point linkage. Standard conditions - Tungsten Carbide.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 350MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

Find Farm Machinery For Sale from $500 to $2,000. Browse 1169 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $500 to $2,000

Farm Supplies Machinery & Equipment

Sale Price

SPAREX CROSS SHAFT (HYDRAULIC LIFT)

SPAREX BALE FRAME - 2 X M22 X 1,100MM - CONUS 1 TINES

SPAREX GATE VALVE WITH OILDYNAMIC RAM WITH SPRING - DOUBLE FLANGED HD 6"

BURDER 200KG CONCRETE COUNTER WEIGHT (3PL)

DIGGA 600MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD - HYDRAULIC DRIVE

DIGGA 375MM AUGER (LIGHT- EARTH) FOR 3 POINT LINKAGE

GENTECH 3.4 KVA PETROL GENERATOR (240V ENGINE POWERED)

RAPID PLAS 190L LONGLINE FEED TROUGH

REDZONE HEATING 150W - FOUR TRAY - GROW WARM FLEXIBLE HEAT PAD (WITH THERMOSTAT)

DIGGA 300MM AUGER (LIGHT- EARTH) FOR 1 MAN BORER

DIGGA 375MM AUGER (HEAVY-HARD GROUND) FOR 3 POINT LINKAGE

DIGGA 350MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

Farm Supplies Machinery & Equipment

Dealer Address