Farm Supplies Machinery & Equipment

The Cement Mixer can mix anything from cement to fertilizer, it fits quickly and easily to your Digga Planetary Auger Drive. Auger Drive sold separately.
Inclusions - Mixer bowl and hub, drive cradle, foot pin and clip. Purchase frame cradle separately (required).
Features:
- Easy connection: Simply pin cradle to existing auger frame and add mixer bowl. Change from drilling to mixing in under 2 minutes.
- Cement mixing attachment to suit Digga auger drives and frames only.
- Suit: Skid Steer Loaders, Mini Loaders and Tele-Handlers.
- Suits all Digga Auger Drives, Mini Auger Drives and auger drives fitted with Swing Control System.
- New Design with easy connection.
- Maintenance-free.
- Manufactured from quality materials.
Specifications:
Total Capacity * - 110L
Struck Capacity ** - 69L
57mm Square Hub
Length - 1202mm
Width - 1212mm
Height - 1324mm
Width (Bowl Only) - 610mm
Weight Complete with PD3 & Frame - 158 kg
Weight (Bowl and Cradle Only) - 38 kg
(*) An upright position depicts total capacity.
(**) Maximum struck capacity is measured at an angle of 45 degrees. See diagrams.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 110L CEMENT MIXER (WITH 57MM SQUARE HUB)

The RSE is compatible to any of the FencePro postdrivers (Excluding Farmtek). There's not many places you can't put a post with FencePro. Smash through those rocks with the industry's best Rockspike system. 2 spike sizes in stock 90 & 120mm, others available on request. Over 6 tonne of lift force. 

Has a chain claw for pulling out posts.

Ideal for punching a pilot hole through stoney ground but it is not so effective in hard or dense clays because it can get stuck. Can be mounted either side of the mast, hydraulic or manual positioning.


All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information

Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FENCE-PRO ROCKSPIKE EXTRACTOR (RSE) - ROCKSPIKE 90MM

500mm - 3 Series Auger up to 5T for 3 point linkage. Standard conditions - Tungsten Carbide.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 500MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

PTO Yoke - Quick Release.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PTO YOKE - QUICK RELEASE (U/J SIZE: 41 X 118MM) - SIZE: 1 3/8" (21 SPLINE)

Potato Ridger Body Assembly. Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX RIDGER BODY ASSEMBLY - REPLACEMENT FOR MASSEY FERGUSON

This separator is the 'economy' model, supplied by Milky of Austria (sold under their Farmland brand).
It will separate at the rate of 140L per hour. Bowl capacity is 12L. The separator is factory set to give around 10% cream production from whole milk at 35 degrees Celsius. It can be adjusted for different volume or density of cream as desired.
Components of cast bright food-grade alloy. Ten flat and eleven ribbed separation discs are original 'Milky' brand, as in their high-value separators.
240v operation.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FARMLAND 140L ELECTRIC CREAM SEPARATOR

Counterweights are important in maintaining the stability of the tractor when using front end loaders. With a front end loader fitted onto a tractor, the centre of gravity shifts forward. The centre of gravity is further amplified when the loader lifts a load thus putting pressure on the tyres, axle and rims.

To eliminate such risks, a 3 point linkage should be used. The counterweight is hooked up with a 3 point linkage set behind the rear axle. This is the best method to improve stability and it reduces the amount of pressure placed on the tyres, axle and rims.

BURDER 500KG STEEL FILLED COUNTER WEIGHT (3PL)

Need to move firewood, dirt, debris or gravel and unload it quickly? Jumbo Tipper Trailer - Australian Made
200kg load capacity
1200 x 720 x 240mm Steel tub
Towball Type (50mm) - suits Mowers, ATV, vehicles & even a Tractor.
- 1200 x 720 x 240mm Steel tub
- 200kg load capacity
- High build quality
- Fully welded steel construction
- Simple tipping operation with lift handle
- Angled back for easy emptying
- Heavy duty tube chassis
- Large wheels to roll over rough terrain
- Hot dipped galvanised for extreme protection against the elements
- Australian made!
Made tough from 2mm fully welded steel construction to last against all you can throw at it.
The perfect trailer for those large and heavy materials on your property or worksite, without needing a Tractor... but you can use a tractor.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CURRIE ENGINEERING 200KG (CAPACITY) MOWER/ATV TIPPER TRAILER (TOWBALL TYPE)

350MM 4 Series Auger (Standard conditions- Tungsten Carbide) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 350MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Pallet Fork specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PALLET FORK (2,000KG LOAD CAPACITY) 80MM X 40MM X 1,200MM

Levelling Box Assembly.
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX LEVELLING BOX ASSEMBLY (710MM MIN ADJUST)

Hydraulic Top Link (Cat.2/2) Ball and Ball
Cylinder Bore: 63mm
Min. Length : 620mm.
Specifications included in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HYDRAULIC TOP LINK (CAT 2/2) (63MM CYLINDER BORE) (620MM MIN LENGTH)

Find Farm Machinery For Sale from $500 to $2,000. Browse 1170 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $500 to $2,000

Farm Supplies Machinery & Equipment

Sale Price

DIGGA 110L CEMENT MIXER (WITH 57MM SQUARE HUB)

FENCE-PRO ROCKSPIKE EXTRACTOR (RSE) - ROCKSPIKE 90MM

DIGGA 500MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

SPAREX PTO YOKE - QUICK RELEASE (U/J SIZE: 41 X 118MM) - SIZE: 1 3/8" (21 SPLINE)

SPAREX RIDGER BODY ASSEMBLY - REPLACEMENT FOR MASSEY FERGUSON

FARMLAND 140L ELECTRIC CREAM SEPARATOR

BURDER 500KG STEEL FILLED COUNTER WEIGHT (3PL)

CURRIE ENGINEERING 200KG (CAPACITY) MOWER/ATV TIPPER TRAILER (TOWBALL TYPE)

DIGGA 350MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

SPAREX PALLET FORK (2,000KG LOAD CAPACITY) 80MM X 40MM X 1,200MM

SPAREX LEVELLING BOX ASSEMBLY (710MM MIN ADJUST)

SPAREX HYDRAULIC TOP LINK (CAT 2/2) (63MM CYLINDER BORE) (620MM MIN LENGTH)

Farm Supplies Machinery & Equipment

Dealer Address