Farm Supplies Machinery & Equipment

This CHPD107 can handle 105mm OD round posts, with 107-78mm & 107-52m reducing bushes supplied.
This post driver has recently been developed for the harsh Australian environment. It is lightweight and portable while being powerful enough to drive a star pickets to strainer posts into the hardest ground in a matter of seconds.
The CHPD107 has the capacity to drive larger section steel pipe from 65-90 nominal bore and comes with easy-install adaptors and anvils to suit. The design enables the operator to move along a fence line with ease much faster than traditional air and hydraulic driven units.
All internal components are manufactured from the highest quality precision machined materials to give the longest tool life possible. The harsh hammering action is isolated from the operator via spring cushioned handles allowing many hours of fatigue free operation even by commercial operators.
The power plant is the ultra-reliable Honda GX50 1.5kW motor boasting 3 year Australia wide warranty. The post driver now also carries a 3 year major parts failure warranty (Excludes normal wear).
See brochure for details.
The CHPD52 (another model) has a 52mm receiver guide tube which allows most standard posts and pipe up to 50mm diameter, as well as timber 35mm square to be driven, while the CHPD78 (another model) has a redesigned lower hammer section to allow much larger posts and pipe to be driven right up to 75mm diameter without any other adapters. The redesigned lower hammer transfers the impact to the post more efficiently allowing larger posts to be driven with ease.
CHPD107 (this model advertised) Blows Per Minute - 1780
Joules - 26
KW - 1.5 (2.0hp) at 7,000 rpm, 4-stroke, overhead cam Trigger throttle with integrated stop button, Spring isolated hand grips
Fuel Consumption - 0.71 L/h at 7,000 rpm. Meets strictest worldwide emission and noise requirements
Starting System - recoil (pull start)
Rating - Continuous use on standard posts
Weight - 17.5kg
Engine Warranty - 3 Year genuine Honda warranty
Post Driver Warranty - 12 months parts failure
Noise Level - 100dB Hearing protection required
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE

CHRISTIE CHPD107 - 105MM POST DRIVER

Farm Aid heavy duty stick rakes are entirely Australian products, designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction. They are built to serve and built to last.
Features:
Heavy duty 75mm x 75mm angle bottom linkage mounts
75mm x 50mm RHS Main frame
Double frame added for added strength
Anti-kick bar fitted for greater strength, greater production for tines and minimise tine breakage
3/4in or 1in special spring steel round curved tines
Tines spaced 6in apart other spacing available on request
Tines float independently approx 90mm max vertical movement
Rakes sit higher, approx 650mm clearance
allowing more debris to be collected.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID STICK RAKES (HEAVY DUTY) - 7FT - FARM AID - FA205

The Wheel Riser series ramps are the latest addition to the Climaxx Aluminium Ramp range. As with all the Climaxx ramps, they are made from Aluminium, ensuring ease of positioning and transport. These service ramps are built for raising Heavy Vehicles off the ground for a variety of uses.
The Wheel Riser series ramps are specifically designed for applications where access to the underside of heavy vehicles is either difficult or restricted. The Climaxx Wheel Riser Ramps are suited but not limited to the following applications:
- Service Centres
- Loading Docks
- Heavy Vehicle Wash Bays
- Heavy Vehicle Inspection Areas
The Wheel Riser ramps are built to comply with the Australian Standard AS. 2640:2016. Released in 2016, this standard outlines stringent requirements in which portable ramps are to be designed and manufactured in accordance with. This standard was released as a result of sub-standard products being used which resulted in fatal injuries.
With over 40 years of experience manufacturing Loading Ramp solutions, we have designed a safe and compliant service ramp product to meet the industry requirements.
Specifications: A, B, C & D shown in picture diagram.
Rated Capacity per Axle: 7,500kg
Ramp Length (A): 1.42m
Raised Bed Length (B): 770mm
Height of Raised Bed (C): 250mm
Height of Raised Bed Including Ramp (D): 302mm
Ramp Tread Width: 400mm
Overall Ramp Width: 500mm
Models:
WR7522-40 - 7,500kg Rated Capacity, 1.42m Ramp Length, 770mm Raised Bed Length, 250mm Height of Raised Bed, 302mm Height of Raised Bed Including Ramp, 400mm Ramp Tread Width, 500mm Overall Ramp Width.
WR7522-60 - 7,500kg Rated Capacity, 1.42m Ramp Length, 770mm Raised Bed Length, 250mm Height of Raised Bed, 302mm Height of Raised Bed Including Ramp, 600mm Ramp Tread Width, 700mm Overall Ramp Width.
WR7536-60 - 7,500kg Rated Capacity, 1.42m Ramp Length, 2,170mm Raised Bed Length, 250mm Height of Raised Bed, 302mm Height of Raised Bed Including Ramp, 600mm Ramp Tread Width, 700mm Overall Ramp Width.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 7.5 TONNE WHEEL RISER RAMP WITH 77CM BED, 1.42M RAMP (50CM RAMP WIDTH)

Box Blades are ideal tool for finish grading, levelling and backfilling.
Features:
17-40 HP Tractors
Cat 1 hookup with replaceable and reversable cutting edge
Manually retractable and height adjustable rippers
Models:
BBX72-01 Working Width: 1.8m Weight: 176kg 35HP Red Powder Coat
BBX72-03 Working Width: 1.8m Weight: 176kg 35HP Green Powder Coat
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FIELDQUIP BOX BLADES 1.8M - BBX72-01

Specifications are shown in images.
Features:
- Carrying capacity from 1.5 to 8 Tonnes
- Versatile and flexible
- Suitable for Steel and rubber tracks as well as pneumatic tyres
- Highest grade alloy
- Multiple safety features
Auger Torque Aluminium Ramps with capacity ranging from 1.5 to 8 tonnes.
With carrying capacities ranging from 1.5 to 8 tonnes, our ramps are over-engineered to ensure they can safely accept steel and rubber tracks as well as pneumatic tyres. This means you no longer need to have individual ramps to cope with various means of traction.
We use only the highest-grade alloy and unlike other companies we dont skimp on quality, so when other ramps start to wear out, ours will still be going strong.
All our ramps incorporate a design feature that prevents bottoming out when loading or unloading and all ramps are supplied with forged locking pins to ensure safe and secure attachment to the loading plate.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE 4 TONNE (3.9M) ALUMINIUM RAMP

Specifications:
Connection Type: Linkage
Weight: 104kg
Height / Width / Length (mm): 930 / 1100 / 1100
Capacity: 400L
Width of Throw: 6-14m
Key Features:
Construction: Heavy duty construction for long service life. The hopper is manufactured from non-corrosive UV stabilised impact resistant polyethylene. The frame is made of galvanised, high strength tubular steel. Spout formed from fibreglass reinforced nylon.
Drive Line: Quality PTO driveshaft with approved safety cover. Continuous stroke flywheel with spring loaded drive coupling. Oscillating mechanism operates in oil bath for long service life.
Height Control: Single lever control for adjusting spreading volumes. Two spouts supplied for banding. Long agitator supplied as standard.
The oscillating spreader is designed for precise application of fertiliser and seed at medium to low rates. The oscillating spout will apply product accurately from 5 to 14 metres depending on material being spread as well as left or right hand banding. Spreader is supplied with spouts for banded spreading for either 3 metre or 7 metre wide rows. (Note: Banded spreading will still allow some product to spread in centre)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 400 LITRE OSCILLATING SPREADER -RON-SQTF400

These finishing mowers are a great alternative to a ride on mower. They provide the same quality finish with a 4ft / 120cm width cut. Ideal for house paddocks, polo fields, golf courses and playing fields.
Manicure your acreage and mow close to shrubs and buildings.
Features include:
Four adjustable caster wheels for varying cutting heights
Three Year Gearbox Warranty
Three belt-driven blades
Quick coupler PTO driveline shaft
Category one hitch pins
Greaseable bearing spindles
Chain guard to prevent thrown objects
Bare-Co PTO shaft (Australian Standard Compliant)
* Please Note: 6ft Finishing Mower featured in images.

Specifications:
No of Blades - 3
Blade Tip Speed (m/s) - 71
Deck Thickness (mm) - 3
Recommended Tractor (HP) - 14-30
Cutting Width (mm) -1190
Overall Width (mm) -1210
Cutting Height (mm) - 35-116
Blade Size (mm) - 402 x 50 x 6
Blade Spindle - 6205 bearings
Belt Drive - V-Belt B1372
3 pt. Hitch - Free-Floating Category One
Gauge Wheel Solid Rubber (Width x Diameter mm) 79 x 208
Wheel Spindle - Greaseable Sealed Bearings
Gearbox: - 1:2.83 Ratio-Cast Iron Housing with Bevelled Gears
PTO Driveline - Bare-Co Series 4 PTO Shaft
Grass Discharge - Rear Discharge with wide 535mm throat.
** Please Note: Some images featuring the 6ft Finishing Mower appear with a Quick Hitch. This is an additional product and is not required to operate the mower.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 4FT FINISHING MOWER, TRIPLE BLADE. SUIT 14-30HP- 4FMOWR

The Selecta Fire Fighting SquatPak tanks are fitted with a base plate and are Baffled to reduce surge when travelling.
Suction fittings are provided to mount various pump and hose combinations.
Features:
- 1,100L tank
- galvanised sled with fork pockets and suction hose
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1,100L BARE DIY FIREFIGHTING TANK

Murray 3 sections with bar, 2.90m Series 04 Diamond Harrow System. Complete set with standard drawbar.
4103- 3 sections with bar - 2.90M
Suitable for open country and lighter loamy soils, Murray Diamond Harrows are an effective implement used for weed control and final seedbed preparation.
Specialising in shattering soil crusts allowing improved aeration and moisture penetration, it will give your crops every chance of reliable germination and subsequent vigour.
The Diamond frame design is constructed using flat bar material providing the Harrow with strength and rigidity. It features replaceable bolt-in 16mm square section High Carbon Steel tapered tines with a working depth between 50 to 80mm (2 to 3).
Murray Diamond Harrows are supplied in sets complete with drawbars, ranging from 2 sections 2.03m (68) to 10 sections 10.16m (334). Lift type sets using our 3 Point Linkage Hoist Frame (Series 21) are available, making transportation of your Harrows easy and convenient. The complete set is comprised of a Front Lift Drawbar, Harrow Sections, Rear Lift Drawbar and 3 Point Linkage Hoist Frame (Series 21).
Features:
- 2 Point Pull (2PP). Replaceable bolt-in 16mm square section High Carbon Steel tapered tines.
- Manufactured from flat bar material
Specifications:
-30 kg (66lb).
- Coverage 0.97M (32).
- Tine Spacing 51mm (2).
- Tine Length 152mm (6) approx
- Centre to centre of Front Hooks 508mm (20).
- 5 Rank / 20 Tines.
- Tapered Tines with working depth between 50 80mm (2 3)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 2.90M DIAMOND HARROW SYSTEM 3 SECTIONS WITH BAR - COMPLETE SET WITH STANDARD DRAWBAR

The fully galvanised Sabre slasher is built tough in Australia with a strong 5mm pressed deck, floating headstock, friction clutch, adjustable skids and front and rear chainguards. The ideal slasher to suit your compact tractor.
Features:
Suits 18-40HP tractors
SABRE range of offsettable rotary slashers
5mm galvanized deck
Cat 1
Adjustable skids
Floating top link
PTO driveshaft
Friction clutch
Front & rear chain guards
Gearbox available in red or yellow.
Specifications:
Overall width: 1.2m
Cutting width: 1.1m (3'6")
Weight: 180kg
HP: 18-40
Finish: Galvanised deck
Options:
- Combination Friction and Overrun Clutch
- 50HP Gearbox Option (50HP standard on SBR18-500)
- Wheelkit (adjustable)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP SABRE SERIES SLASHER 1.2M - GALVANISED DECK, SUIT 18-40HP

Designed and built in Australia, The Easyroll retractable hose reel is a simple, effective solution for operators to spray noxious weeds along fence lines, roadside, undulating scrub, Blackberries, nurseries, or glasshouses and more.
Ultimately minimizing fatigue.
The Easyroll hose reel has been designed to retro fit onto many sprayers with a flat surface that can hold the weight of the reel (20 kg)
Length = 52.7 mm
Width = 27.7 mm
Height = 54.7 mm
Weight= 20 kg
Construction: Lightweight and Compact combined with heavy duty thick gauge stainless steel construction. A stainless steel finish is superior to paint for ultimate resistance corrosion and scratches. An electric drive system assembly eliminates the use of chains, belts, and sprockets for more reliable and safer working conditions. This means that there are no belts or chains that need to be regularly checked and tensioned or replaced. A central Hub motor mechanism is free of pinch points and is effectively maintenance free along with a four-roller hose guide for smooth free running hose
Motor: 12V DC Brushless High Torque electric motor with Max 25amp Draw
Remote Control: Single channel control 433mhz with adaptive frequency hopping prevents interference for reliable performance across undulating terrain
Reel Mounted Controls: On/Off power switch and manual override rewind switch
Hose Reel (Specifications): Push Pull connections on outlet and hub. The Hose is 50m of 12mm O.D Kink resistant nylon tubing with push fit fitting. A 20Bar/290psi working pressure. The Spray Gun consists of an Atomiser with hose swivel and gun holder with spray performance of up to 15m distance
Mounting the Reel: Select a flat surface that can hold the weight of the hose reel. The position the hose reel on the surface, mark the hole locations (175mm x 175mm). Using a drill to create holes at the marked locations. Tighten the hose reel with M 10 Bolts, nuts & washers
Pump Pairing: Ideal pump to use is the Silvan Comet LBA-34C. The Comet MC20/20 18.5 L/min open flow capacity & 20 Bar / 290 psi maximum pressure. A Silvan self-priming positive displacement oil-backed diaphragm Pump with nitrile diaphragms and corrosion resistant, cast anodised aluminium body
Control Valve: Pressure regulator with pressure adjustment and automatic bypass, gauge and 2 outlets - 1 for the hose reel & 1 for an optional spray boom
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 50M EASYROLL 12V REMOTE RETRACTABLE REEL

Note: This model does include a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50
RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 28
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 2.8M S-TINE (28 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 56HP

Find Farm Machinery For Sale from $2,000 to $5,000. Browse 865 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $2,000 to $5,000

Farm Supplies Machinery & Equipment

Sale Price

CHRISTIE CHPD107 - 105MM POST DRIVER

FARM-AID STICK RAKES (HEAVY DUTY) - 7FT - FARM AID - FA205

SUREWELD 7.5 TONNE WHEEL RISER RAMP WITH 77CM BED, 1.42M RAMP (50CM RAMP WIDTH)

FIELDQUIP BOX BLADES 1.8M - BBX72-01

AUGER TORQUE 4 TONNE (3.9M) ALUMINIUM RAMP

SILVAN 400 LITRE OSCILLATING SPREADER -RON-SQTF400

SOUTHERN CROSS AG MACHINERY 4FT FINISHING MOWER, TRIPLE BLADE. SUIT 14-30HP- 4FMOWR

SILVAN 1,100L BARE DIY FIREFIGHTING TANK

MURRAY 2.90M DIAMOND HARROW SYSTEM 3 SECTIONS WITH BAR - COMPLETE SET WITH STANDARD DRAWBAR

FIELDQUIP SABRE SERIES SLASHER 1.2M - GALVANISED DECK, SUIT 18-40HP

SILVAN 50M EASYROLL 12V REMOTE RETRACTABLE REEL

JOHN BERENDS 2.8M S-TINE (28 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 56HP

Farm Supplies Machinery & Equipment

Dealer Address