Farm Supplies Machinery & Equipment

Specifications:
Capacity: 10,500L
Style: Standard
Diameter: 2,520mm
Inlet height: 2,260mm
Total height: 2,450mm
Features:
* Built with NEW Crown Force Technology
* A Unique Inbuilt Centre Crown - For maximum strength
* Triangular Fin roof design stemming out from the Crown To provide superior support
* Genuine Corrugated Design - For wall integrity and the classic Australian style
* Constructed with RGBlend20 raw material - for strength and UV protection
* 4 x Moulded in lifting lugs - For safe handling and moving into place
* 2 x 1 ½" BSP Outlets For flexible installation
* 1 x 1 ½" Ball Valve So your tank is ready for use
* 90mm Overflow Kit For simple installation anywhere around the tank
* 500mm Inlet Strainer & Dust Cover -To prevent algae growth in your water

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 10,500L LARGE CORRUGATED RAINWATER CROWN FORCE TANK

Southern Cross 6ft Slasher - 50-75hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Dupont powder coating
- 4mm deck
- Height adjustable skids with five different cuttings heights
- 75HP Bare-Co gearbox
- Bare-Co 8 inch slip clutch
- Bare-Co Series 6 PTO shaft
- Front and rear discharge deflectors (chain)
- Centre mount
- High tensile chains for durability
- Braced platforms for maximum strength
- 3 Year Gearbox Warranty
- Bare-Co gearbox / slip clutch safety guarding
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Optional wheel kits available (two wheel kits are recommended for the
6ft slasher)
Specifications:
- Recommended Tractor (HP) - 50-75
- Cutting Width (mm) - 1750
- Overall Width (mm) - 1870
- Cutting Height (mm) - 42-167
- Number of Blades - 2
- Blade Size (mm) - 360x12.7mm(Bare-Co B6002)
- Blade Tip Speed (m/s max.) - 60
- Deck Thickness (mm) - 4.0
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/75HP
- PTO Driveline - Bare-CO Series 6 PTO Shaft
- Grass Discharge - Rear Discharge
- Blade Carrier System - Cutter Bar
- Slip Clutch - Bare-Co 8" Slip-clutch included
- Gross Weight - 436kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 6FT SLASHER-SUIT 50-75HP

The IE Series is our most cost effective seed spreading solution that can be easily mounted at the back of most quad bikes, UTVs and utility style vehicle. It is powered by a 12-volt power source making it extremely user friendly and effective way to broadcast seed.
Features:
* Spreading rate can be controlled by electric shutter.
* Yellow poly hopper makes rust free and visible inside
* Stainless Steel Frame and spinner

Remote Controller
* Spreading Width Maximum 22m, Minimum 2m
* Spreading Width can be controlled by remote controller

Specifications:
* Capacity: 70ltr
* Working Speed: 6-12km/h
* Spreading Width: Min 2m - Max 22m
* No. Discs: 1
* Outlet Shutter Control: Manual
* Width Adjustment: 90-180 deg left or right
* Length: 600mm
* Height: 830mm
* Width: 550mm
* Hopper Material: Poly
* Power: DC

Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

IRIS 70L BROADCASTER SPREADER 12V - IE-70 SS/C

RCD PACK -8 kVA portable generator powered by Honda petrol engine. Featuring Worksafe aproved RCD protected outlets.
Newly designed frame
2 x 15 Amp IP56 RCD protected outlets
With these features, using your gentech generator on a work site will be a breeze. The RCD protected outlets are work safe approved and comply with Australian Standards. This hard working, light weight generator is ideal for small appliances (e.g. TVs, bar fridges) and small hand tools (e.g. drills and jigsaws).
Specifications:
Power Rating: 8 kVA
Model Rating 0.8pf @ 50Hz: 8 kVA
Alternator Rating: 9.5 kVA
Engine Model: Honda GX390
Phase: 1-phase
Starting System: Recoil
Fuel Tank Capacity: 6.5
Noise Level @ 7m: 74 dBA
Outlets: RCD protected 15 Amp
Approx. Fuel Consumption @ 80% Load: 2.90 L/hr
Operation Hours @ 80% Load: 2.24 hrs
Fuel Type: Petrol
Diam.: 900 x 550 x 680 mm (L x W x H)
Weight: 88 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 8 KVA RCD PETROL GENERATOR

This 7kVA Generator is the perfect size for almost everything, with 2 x 15 amp outlets, and Honda Australia Approved GX390 engine, this generator will run your power tools, small compressor, and much much more.
Searching for a tough, economical generator for around the farm or jobsite? Your search stops here. This workhorse combines the reliability and power of a Honda engine with the durability of a Gentech design. The Honda GX390 engine delivers more power, quieter performance and lower fuel consumption. The result is 7 kVA portable power suitable for hand tools and small to medium work appliances. A good size for drills, smaller welders, saws, pressure washers, small to medium pumps etc.
With fuel economy of 2.6 litres per hour, the 6.5 litre fuel tank delivers 2.5hours of operation at 80% load. A recoil start, double 15 Amp outlet panel and great optional accessories complete the package. This generator is the real deal for farming and trade use; backed by a national service support netowrk.
The package is complete with a 2 year generator warranty backed by a national service network. The Honda engine comes with a 4 year warranty.
Specifications:
Power Rating: 7 kVA
Model Rating 0.8pf @ 50Hz: 7 kVA
Alternator Rating: 7 kVA
Engine Model: Honda GX390
Phase: 1-Phase
Starting System: Recoil
Fuel Tank Capacity: 6.5 L
Noise Level @ 7m: 69 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 2.60 L/hr
Operation Hours @ 80% Load: 2.50 hrs
Fuel Type: Petrol
Diam.: 735 x 545 x 525 mm (L x W x H)
Weight: 75 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA PETROL GENERATOR (240V ENGINE POWERED)

Bamawm 6 inch, 3m Grain Auger with the choice of a Hydraulic or Electric motor driven option (motor not included in listed price - option listed below). Grain auger includes 2mm wall tube on small augers and 3mm on large augers.
Also available in transportable options and we can custom build to your needs.
Features:
Electric motor or hydraulic motor drive (additional cost option)
Minimum 2mm wall tube on small augers and 3mm on larger augers
Gearbox drive on electric motor driven augers to eliminate belts, pulleys and maintenance
Torque arms with heavy duty top bearing standard on larger augers
Heavy duty triple lipped sealed bearings
Variable speed available
Also available: Galvanising, mounting brackets, clamps and hosing
Motor Option (Prices from $300):
Single Phase, Three Phase, Hydraulic, or Custom up to 4kw.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BAMAWM 6" (3M) GRAIN AUGER TO SUIT ELEC & HYD ROLLER MILLS (MOTOR NOT INCL)

Spraying weeds the traditional way introduces the potential for damaged crops, and possibly even health risks in farmers due to herbicide spray drift.
The Weed Wiper allows farmers to apply herbicide weed control whenever they want - even on windy days - because the application is wiped-on instead of sprayed.
Made in Australia
2m width - 1m tubes x2 (hinged)
20L Tank
Tube Type Frame with rope.
Weight = 32kg (empty)
With no off spray, wildlife habitats and species rich protected areas are less affected and it makes weed control healthier for the operator as well.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHERWOOD 2M WEED WIPER (ATV / BIKE)

Foam Marker Complete Assembly. Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX FOAM MARKER COMPLETE ASSEMBLY

Pallet Fork specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HIGH BACK SKID STEER PALLET FORK (2,000KG LOAD CAPACITY)

Specifications:
Capacity: 14,000L
Style: Standard
Diameter: 3000mm
Inlet height: 2150mm
Total height: 2420mm
Features:
* Built with NEW Crown Force Technology
* A Unique Inbuilt Centre Crown - For maximum strength
* Triangular Fin roof design stemming out from the Crown To provide superior support
* Genuine Corrugated Design - For wall integrity and the classic Australian style
* Constructed with RGBlend20 raw material - for strength and UV protection
* 4 x Moulded in lifting lugs - For safe handling and moving into place
* 2 x 1 ½" BSP Outlets For flexible installation
* 1 x 1 ½" Ball Valve So your tank is ready for use
* 90mm Overflow Kit For simple installation anywhere around the tank
* 500mm Inlet Strainer & Dust Cover -To prevent algae growth in your water

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 14,000L LARGE CORRUGATED RAINWATER CROWN FORCE TANK

The Side Discharge JACKY Bins are ideal for bagging feed, feeding out grain and pellets, filling seed drills and self-feeders, and dispensing into product blending systems. The steep slopes and large discharge opening assist with positive drainage and minimal retention of product in hopper.
Australian made and owned.
Specifications:
Capacity (kg): 700
Length (mm): 1,180
Width (mm): 1,180
Height (mm): 1,760
Benefits:
- 1,000L/1.0m³capacity.
- Safe Working Load (SWL) - 1,200kg.
- Large top opening for easy filling and cleaning.
- All working parts are UV stabilised polyethylene or stainless steel for longevity.
- 40° run slope allows the discharge rate of most granular products to be easily controlled.
- Standard colour is Faint Green.
- Serial numbering and custom branding available to assist in tracking batch lots.
Options:
- Raimo bulk bag dispenser
- Reaper knife blade
- Document holder heavy duty
- Tine pocket 1,000mm (folded 200mm x 100mm)
- Weather flap
- Lever (double sided)
- Lever (left)
- Lever (right)
- Chute 1,000mm
- Chute 280mm
- Chute with 100mm diameter nozzle
- Chute flexible
- Actuator kit 12 volt
- Leg extension to suit
- Clear sightglass point in face of Jacky bin
- Hatch assembly
- Lid to suit
- Eurohitch attachment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JACKY STORAGE 1,000L SIDE DISCHARGE BIN (STEEL FRAME)

The Centre Discharge JACKY Bin design incorporates a poly hopper mounted on a forkliftable base. The bin empties through an opening in the centre of the base, with the slide-hatch mechanism allowing precise control of the discharge rate.
Australian made and owned.
Specifications:
Length (mm): 1,160
Width (mm): 1,230
Height (mm): 1,790
Benefits:
- 1,200kg Safe Working Load
- 1,600L hopper volume
- Narrow frame size designed for feed mills
- Ideal for powdered products
- Large opening for easy filling and cleaning
- 54° run slope assists with complete evacuation of contents
- All working parts are UV stabilized polyethylene or stainless steel, for longevity
- Standard colour Natural (translucent white)
- Customizations such as serial numbers, branding etc. available please ask.
Options:
- Raimo bulk bag dispenser
- Reaper knife blade
- Document holder heavy duty
- Tine pocket 1,000mm (folded 200mm x 100mm)
- Transition nozzle piece
- Actuator kit 12 volt
- Clear sightglass point in face of Jacky bin
- Hatch assembly
- Chute flow director poly
- Garnet outlet
- Base poly
- Lid to suit
- Eurohitch attachment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JACKY STORAGE 1,600L CENTRE (FAST DISCHARGE) BIN (NARROW FRAME)

Find Farm Machinery For Sale from $2,000 to $5,000. Browse 865 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $2,000 to $5,000

Farm Supplies Machinery & Equipment

Sale Price

RAPID PLAS 10,500L LARGE CORRUGATED RAINWATER CROWN FORCE TANK

SOUTHERN CROSS AG MACHINERY 6FT SLASHER-SUIT 50-75HP

IRIS 70L BROADCASTER SPREADER 12V - IE-70 SS/C

GENTECH 8 KVA RCD PETROL GENERATOR

GENTECH 7 KVA PETROL GENERATOR (240V ENGINE POWERED)

BAMAWM 6" (3M) GRAIN AUGER TO SUIT ELEC & HYD ROLLER MILLS (MOTOR NOT INCL)

SHERWOOD 2M WEED WIPER (ATV / BIKE)

SPAREX FOAM MARKER COMPLETE ASSEMBLY

SPAREX HIGH BACK SKID STEER PALLET FORK (2,000KG LOAD CAPACITY)

RAPID PLAS 14,000L LARGE CORRUGATED RAINWATER CROWN FORCE TANK

JACKY STORAGE 1,000L SIDE DISCHARGE BIN (STEEL FRAME)

JACKY STORAGE 1,600L CENTRE (FAST DISCHARGE) BIN (NARROW FRAME)

Farm Supplies Machinery & Equipment

Dealer Address