Farm Supplies Machinery & Equipment

Hydraulic Down Pressure Post Hole Digger - 50hp
Designed to provide extra down pressure to penetrate hard ground. This fixed frame design does not use the tractor linkage to raise or lower, instead it uses a powerful hydraulic ram to pivot the auger frame helping the auger penetrate the ground.
Features:
- 50hp gearbox
- Comes with slip clutch and PTO shaft.
- Digs up to 4 depth hole
- Galvanised finish
- 12 months warranty
- Weight: 200KG
* Auger not included, Sold separately.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN HYDRAULIC DOWN PRESSURE POST HOLE DIGGER - 50HP -82401DC

Southern Cross 5ft Slasher - 30-45hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Optional Wheel Kit(s) - Twin Kit available
Features:
- Built for Australian conditions
- Australian Slasher Health and Safety Standards Compliant
- Dupont powder coating
- 3.5mm deck
- Height adjustable skids with five different cuttings heights
- 45HP Bare-Co gearbox
- 3 Year Gearbox Warranty
- Bare-Co 6 inch slip clutch
- Bare-Co Series 4 PTO shaft
- Front and rear discharge deflectors (chain)
- Centre mount and offset left and right
- High tensile drag chains mounting system for durability
- Clear decks for easy maintenance
- Double plate gearbox mount
- Structural integrity located under deck with no impact on material flow
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Optional wheel kits available (one wheel kit is recommended for the 5ft slasher)
Specifications:
- Recommended Tractor (HP) - 30-45
- Cutting Width (mm) - 1470
- Overall Width (mm) - 1650
- Cutting Height (mm) - 30-116
- Number of Blades - 2
- Blade Size (mm) - 360X12.7mm(Bare-Co B6002)
- Blade Tip Speed (m/s max.) - 60
- Deck Thickness (mm) - 3.5
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/45HP
- PTO Driveline - Bare-CO Series 4 PTO Shaft
- Grass Discharge - Rear Discharge
- Slip Clutch - Bare-Co 6" Slip-clutch included
- Gross Weight - 323kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 5FT SLASHER, SUIT 30-45HP

No corners have been cut in their construction. They are built to serve and built to last.
Ideal for general farm use or specifically for turf farms, race clubs, ovals etc.
Farm Aid lawn rollers are entirely Australian products Designed and manufactured by our team here in Coopers Plains from Australian Materials.
75 x 50 x 6mm RHS Main frame.
Heavy Duty Linkage.
Round, seamless steel tubes, 14in diameter x 1/4in wall thickness.
Can be filled with water for additional weight.
FA452 8ft Lawn Roller (approx. 240kg empty or 432kg filled)
FA455 Optional drawbar can be made to order
Trailed Models can be made to order
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID LAWN ROLLERS - 8FT - FARM AID - FA452

Farm Aid 3PL pallet forks are entirely Australian products Designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction. They are built to serve and built to last.
Features
- 3pt linkage with 750 kg Capacity
- Solid Fork Lifting Tines 100 x 40mm
- Fully adjustable fork width
- Lift as high as your linkage allows
- Cat 1 & Cat 2 Pins
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID PALLET FORKS (SOLID TINES) - FA601

Jarrett Silverback Series Slasher 1.5m.
Cat I Tower, Hi- speed gearbox, 4mm body and 4mm front and rear apron.
A quality lifestyle slasher range specifically designed for the smaller tractor, smaller acreage farmer who wants features, style and reliability!
Features:
- One Piece body sheet - Eliminates collection points for grass and debris
- Unique clean-top design - Makes cleaning a breeze. 3-degree centre-to-front/back slope adds to the ease of keeping debris and water off
- Full length profiled side plates- Adds strength to the slasher body
- Hotdip-galvanized body- Keeps your slasher in good order for many years of service.
- Strong headstock and chain backtays - Allows the slasher to follow the ground contour.
- Central and offset mounting - Allows the slasher to be set in either Central, Left or Right offset.
- Double leg headstock mounting - The tower headstock is held securely by a clevis mounting bracket.
- Reinforced headstock mounting gussets - Hidden inside the body design and combined with the strong body sheet to ensure a rigid and strong fixing point for the headstock and backstays.
- Bolt-on chain guards are easy to repair when damaged, bolted on giving added strength to the leading edges.
- Skids reversible - Reversible and a slow 200mm radius front and rear leading edge keeps the skid from digging to help the slasher ride over irregularities on the ground.
- Skid adjustable plates - Adjusting plates give the skids 3 positive-lock height positions so you don't have to rely on just friction and aligning bolts and holes.
Specifications:
Body Plate thickness (mm) - 4
Total width (mm) - 1540
Cutting width (mm) - 1400
Total weight (kg) - 275
Gearbox hp/(kw)- 40/(30)
Drive Shaft Series - S4
Clutch Diameter (mm) - 150
Tip Speed ft/min/(m/s) - 16 400(85)
Options:
- Rear Chain curtain in lieu of rubber
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS SILVERBACK SERIES SLASHER 1.5M CAT 1 - 40HP - SB-150

Round Bale Grab 5 ft.

2 in 1 function is available with optional unrolling spikes installed onto a Burder round bale grab. It allows the grabbing of round bales as well as unrolling round bales.

Burder quick change hooks are standard and other mounts are available upon request. The pins can be easily replaced for the purpose of maintenance.

*Requires front remotes

Specifications:

- Open Width (mm): 1800
- Closed Width (mm): 300
- Dimensions LxWxH (mm): 1500x1500x650
- Weight (kg): 187

Optional unrolling spikes for round bale grab.

BURDER ROUND BALE SILAGE GRAB 5FT - REQUIRES FRONT REMOTES

Specifications:
Capacity: 5,000L
Style: Slimline
Diameter: 3320mm
Width: 1040mm
Inlet height: 2020mm
Total height: 2020mm
Catchment Size (m2): from 11 to 20, from 21 to 30
Features:
* 4 x Hand-grips to make it easier to handle
* 2 x Inlet Strainers (1 either end for versatility)
* 2 x 1" Outlets (1 either end)
* 1 x 90mm Overflow supplied - (position at either end)
* 1 x ¾ tap supplied
* Lifting lugs enable tank to be craned into restricted spaces

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 5,000L SLIMLINE RAINWATER TANK

Burders post hole digger comes complete with hoses and attachment frame. The auger drive is powered by hydraulics and downward pressure is applied when drilling a hole. The frame is designed to allow the auger unit to be adjusted infinitely from one end to another.
Note: Post hole digger pictured with optional Auger attached (refer to options below).
Features:
Available drills: 100 - 600mm
Burder Mounts as standard
Other loader mounts available
All fitted with tungsten dirt teeth
Hydraulic units plumbed to tractor remotes or front remotes
Cement mixer option available
Specifications:
Drive: 65mm round S4
Flow LPM: 50-95
Ideal Flow LPM: 75
Auger Range: 100 - 600
Optional Augers:
Model Description Drive Flow L/min
30-40101200 Auger Tungsten Teeth & Pilot 100mm S4 1200mm
30-40151200 Auger Tungsten Teeth & Pilot 150mm S4 1200mm
30-40201200 Auger Tungsten Teeth & Pilot 200mm S4 1200mm
30-40251200 Auger Tungsten Teeth & Pilot 250mm S4 1200mm
30-40301200 Auger Tungsten Teeth & Pilot 300mm S4 1200mm
30-40451200 Auger Tungsten Teeth & Pilot 450mm S4 1200mm
30-40601200 Auger Tungsten Teeth & Pilot 600mm S4 1200mm
31-4100200 Extension NA 1000mm
30-20102100 Auger Tungsten Teeth & Pilot 100mm S2 900mm
30-20152100 Auger Tungsten Teeth & Pilot 150mm S2 900mm
30-20202100 Auger Tungsten Teeth & Pilot 200mm S2 900mm
30-20232100 Auger Tungsten Teeth & Pilot 225mm S2 900mm
30-20253100 Auger Tungsten Teeth & Pilot 250mm S2 900mm
30-20303100 Auger Tungsten Teeth & Pilot 300mm S2 900mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 95 FLOW (50-95) LPM - HYDROSTATIC AUGER DRIVE

Polymaster aquaculture tank in food-grade, virgin polyethylene for healthy, productive fisheries and other enterprises.
* pump shown for illustration purposes only - pump to be ordered separately (6.5hp Chemical pump available as option - HTP750VR)

Capacity : 2,000 L
Diameter: 2,000 mm
Height : 1,000 mm
Features:
- Effective mixing with re circulation pump
- Self-draining tank no waste when emptying
- Safe mixing with venturis no moving parts
- Resistant to most fertilisers & trace elements
Ideal for vineyards, orchards or any fertilizer dosing applications, Polymasters fertigation mixing tanks and self-draining vessels aid in distributing liquid fertilizer through the irrigation system.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 2,000L LIQUID FERTILISER TANK INC BASE & VENTURI FITOUT

Specifications:
Capacity: 22,500L
Style: Low Profile
Diameter: 3840mm
Inlet height: 2060mm
Total height: 2440mm
Features:
* Built with NEW Crown Force Technology
* A Unique Inbuilt Centre Crown - For maximum strength
* Triangular Fin roof design stemming out from the Crown To provide superior support
* Genuine Corrugated Design - For wall integrity and the classic Australian style
* Constructed with RGBlend20 raw material - for strength and UV protection
* 4 x Moulded in lifting lugs - For safe handling and moving into place
* 2 x 1 ½" BSP Outlets For flexible installation
* 1 x 1 ½" Ball Valve So your tank is ready for use
* 90mm Overflow Kit For simple installation anywhere around the tank
* 500mm Inlet Strainer & Dust Cover -To prevent algae growth in your water

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 22,500L (LOW PROFILE) LARGE CORRUGATED RAINWATER CROWN FORCE TANK

13,500L Molasses Tank including lid and 3" Outlet.
Specifications:
Litres: 13,500L
Style: Standard
Diameter: 3000mm
Inlet height: 2150mm
Total height: 2330mm
Features:
Extra Heavy Tanks with thicker walls suitable for molasses storage.
Free delivery to site within our delivery area.
Available in any colour from our range.
Hinged and vented lid.
Manhole access.
3" brass outlet supplied as standard.
rated for 1.5SG liquids.
Options:
Upgrade to larger Brass Outlets.
Ball valve Tap available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 13,500L MOLASSES STORAGE TANK

3,000L Underground Septic Tank with Partition
Specifications:
Total height: 1875mm
Diameter: 1880mm
Weight: 137kg
Features:
AS1546.1:1998 tested and approved
Injection moulded polypropylene with UV stabilised lid
Lightweight yet strong
Partitioned type required in NSW for septic use check your local Council requirements
15 year warranty
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 3,000L UNDERGROUND SEPTIC TANK WITH PARTITION

Find Farm Machinery For Sale from $2,000 to $5,000. Browse 865 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $2,000 to $5,000

Farm Supplies Machinery & Equipment

Sale Price

DAKEN HYDRAULIC DOWN PRESSURE POST HOLE DIGGER - 50HP -82401DC

SOUTHERN CROSS AG MACHINERY 5FT SLASHER, SUIT 30-45HP

FARM-AID LAWN ROLLERS - 8FT - FARM AID - FA452

FARM-AID PALLET FORKS (SOLID TINES) - FA601

JARRETT IMPLEMENTS SILVERBACK SERIES SLASHER 1.5M CAT 1 - 40HP - SB-150

BURDER ROUND BALE SILAGE GRAB 5FT - REQUIRES FRONT REMOTES

RAPID PLAS 5,000L SLIMLINE RAINWATER TANK

BURDER 95 FLOW (50-95) LPM - HYDROSTATIC AUGER DRIVE

POLYMASTER 2,000L LIQUID FERTILISER TANK INC BASE & VENTURI FITOUT

RAPID PLAS 22,500L (LOW PROFILE) LARGE CORRUGATED RAINWATER CROWN FORCE TANK

RAPID PLAS 13,500L MOLASSES STORAGE TANK

RAPID PLAS 3,000L UNDERGROUND SEPTIC TANK WITH PARTITION

Farm Supplies Machinery & Equipment

Dealer Address