Farm Supplies Machinery & Equipment

This is an economical unit ideal for the home-pasteuriser. It used the same principles as the best commercial pasteurisers, including pressurised heating and vacuum-sealed cooling.
It is thermostatically controlled to 70 degrees Celsius and has automatic shut-down when the process is completed.
Constructed of aluminium and stainless steel parts. 220v operated. Milk capacity 7.5L.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SAFGARD 7.5L PASTEURISER

7 kVA portable welder/generator powered by Honda petrol engine with electric start.
This generator is the workers choice, featuring 7 kVA of real grunt and up to 200 Amps of welding power for exceptional performance to keep you working until the job is done.
Specifications:
Model Rating 0.8pf @ 50Hz: 7 kVA
Alternator Rating: 7 kVA
Engine Model: Honda GX390
Phase: 1-Phase
Starting System: Recoil/E-Start
Noise Level @ 7m: 69 dBA
Outlets: Double GPO 15 Amp
Welder: 200 Amp
Duty Cycle: 60%
Approx. Fuel Consumption @ 80% Load: 2.44 L/Hr
Operation Hours @ 80% Load: 2.5 hrs
Optional Extras:
10-WELD LEADS-08 - 8MTR kVA, Heavy duty leads, clamps, electrode holder suits both 200A and 230A models.
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA WELDER PETROL GENERATOR (ELECTRIC START)

Heavy Duty Front Blade (straight) - 3000mm.
Specifications:
Height: 480mm
Width: 3000mm
Options:
Hydraulic Tilt
Hydraulic Angle
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER TELEHANDLER HEAVY DUTY FRONT BLADE - 3000MM

1550mm (61 inch) flat floor Agricultural bucket.
Price Inclusions: 16mm floor bucket, hoses and couplers.
Suits Tractors with most frame types.
Available in width sizes: 1550/1600/1650/1680/1727/1800/1880/2000/ 2130/2200.
See photos for more info and specifications.
An evolution from the tried and proven design of the Digga 4 in 1 Skid Steer Bucket. Updated to suit the needs of the agricultural industry, while still incorporating many of the features skid steer owners enjoy.
Ideal Use:
Grading, scraping, grappling, dozing dirt or material spreading most construction work.
Machine Suitability:
Suits all tractors including those with standard euro hitch
Features:
- Standard Heavy Duty 16mm floors
- 20mm floors available on request
- Light weight designed specifically for Agricultural machines
- Full range available from 1500mm to 2200mm
- Grabbing teeth profiled on both the front/rear overlap for greater grip of logs and other debris
- Same fitment on tractor as the general purpose bucket
Options:
- Optional Teeth: Chisel or Tiger teeth - pin on design
Accessories:
- Front bolt-on edge only available on Agricultural buckets. A 20mm floor is required for 2 or 3 edges.
- Spreada bars: 350 grade steel spreader bar with wear strips
- Kwik rips and replaceable chisel earth teeth
- Tractor 3rd Function kits.
Specifications:
- Depth (Bucket Closed) 826
- Bucket Cutting Width 1550
- Height 638
- Weight (kgs) 285
- Floor Thickness 16mm
- ISO Struck Volume m³ 0.22
- ISO Heaped Volume m³ 0.29
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 16MM AGRICULTURAL 4 IN 1 BUCKET -1550MM FLAT FLOOR - BUCKET-AG-1550

Cultivator - 4 Row 150
Cultivators are a secondary tillage product, for preparing seedbeds, and controlling weeds.
3 and 4 row models available with heavy duty S tines set up with trash flow pattern.
With the addition of a Bracket a Daken C Seeder can be mounted making it a simple but effective sowing device.
Features:
- Strong rugged construction
- Trash flow tine pattern
- Suits Cat 1 & 2
- C seeder bracket supplied
- 12mm heavy duty S tines
- 3 and 4 rows
- Suitable to have C Seeder mounted
- Tines mounted approx. every 300mm
- 2 Year Warranty
- Weight: 188kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN CULTIVATOR MODEL 4 ROW 150 GALVANIZED - 03105DC

Southern Cross 4ft Galvanised Slasher - suit 18-45hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Key Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Hot dipped galvanised body
- 4 mm deck
- Height adjustable skids with five different cuttings heights
- 45HP Bare-Co gearbox
- 3 Year Gearbox Warranty
- Bare-Co 6 inch slip clutch
- Bare-Co Series 4 PTO shaft
- Front and rear discharge deflectors (chain)
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Structural integrity located under deck with no impact on material flow
- Bare-Co gearbox / slip clutch safety guarding
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
Specifications:
- Recommended Tractor (HP) - 18-45
- Cutting Width (mm) - 1160
- Overall Width (mm) - 1350
- Cutting Height (mm) - 30-116
- Number of Blades - 2
- Blade Size (mm) - Bare-Co B6002
- Blade Tip Speed (m/s max.) - 66
- Deck Thickness (mm) - 4.0
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/45HP
- PTO Driveline - Bare-CO 6 inch slip-clutch and Series 4 PTO Shaft
- Grass Discharge - Rear Discharge
- Gross Weight - 233kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 4FT GALVANISED SLASHER, SUIT 18-45HP

Large capacity 1100L polytuff tank, UV stabilised for Australian conditions.
Features an internal baffle to reduce surge when travelling and moulded poly feet that can be securely mounted to platform or deck.
Hi-Flow pump 12V (open flow 80 L/min).
Specifications:
Tank Size (L): 1100
Product Weight (kg): 61
Height / Width / Length (mm): 1090 / 1180 / 1500
Tank: 1100L capacity polytuff tank, Internal Baffle, UV stabilised and impact resistant with calibrated fill mark. Moulded tank feet can allow secure mounting to the to a platform or deck. The filler cap is a large 122mm width including breather.
Pump Specifications: Input: 12V DC; Output: 80L/min (open flow); Power cord: 4m long with alligator clips; Amp: 35; RPM: 2000; Duty Cycle: 30mins; Internal Fuse: 35Amp; Pressure: 1.5 Bar max before internal bypass opens
Options:
PF26-X3 - Digital Litre Counter (customer fitment)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 1,100L HI FLOW DIESELPAK TRANSFER UNIT

PTO Wire Winder
Fencing around your property is worth thousands of dollars. Save your wire and re-use it for repairing or making new fences.
Now with the Daken PTO Wire Winder you can rewind and reclaim any gauge wire, be it barbed, plain, high tensile or soft wire, easily and economically.
This machine will reclaim fence wire and form a standard size wire role ready to use elsewhere , the wire can also be fed out manually from the same machine.
The Daken PTO Wire Winder will not pull wire through a fence , but will form a roll from a disassembled fence by backing along the fence line.
Features:
· P.T.O. shaft driven
· Automatic tensioning ensures firm wire rolls
· Traverse eye to give well formed rolls
· Fits any tractor linkage
· Rewinds and spins out wire without kinks
· Reclaimed wire - coil dimensions 600mm ID, 900mm OD, 150mm deep
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN PTO WIRE WINDER-82000DC

The rugged 12V DieselPak transfer units feature large internal baffles, heavy duty accessory mounting points and are manufactured with a diesel grade polyethylene that is UV stabilised and impact resistant.
The premium 12V pumps are made by PIUSI, a world class Italian pump manufacturer.
Features:
Pump: 12V PIUSI Self-priming pump.
Hose: 5m 3/4in delivery hose with auto shut-off nozzle.
Wiring Harness: 4m wiring harness with alligator clips.
Foot Screen: Suction foot screen filter on internal suction line.
Specifications:
Tank Size (L): 400
Pump Size (L/MIN): 45
Product Weight (KG): 42
Height / Width / Length (MM): 650 / 900 / 1060
Options:
354130B - Lid with breather
PF26-X3 - Digital Litre Counter (customer fitment)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 400L DIESELPAK TRANSFER UNIT

4ft Disc Harrows recommended for tractors 15-35HP
12" notched x 16" diameter disc blades for superior penetration.
4ft working width.
Category one hitch pins.
Dimensions = 129 x 113 x 72 (cm)
Weight = 170 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 4FT OFFSET DISC HARROWS - 12X16 INCH DISCS - 4DH -SUIT 15-35HP

Blade for FEL (Front End Loader) with reversible root rake 3000 Series - 1.35m. 

The reversible blade & root rake allows the operator to switch over to a root rake when the blade is not in use for earth moving activities. 

Top soil does not disappear as the reversible root rake will only pick up debris caught along the way. 

There are multiple configurations for the reversible blade & root rake.

Features:
- Manual angle
- Manual tilt
- Hydraulic angle
- Hydraulic tilt

Optional flip down root rake.

Specifications:

- Width (m): 1.35m	
- Height (mm): 570
- HP Range: 20-45
- Base Weight (kg): 95

BURDER FEL BLADE WITH REVERSIBLE ROOT RAKE 3000 SERIES 1.35M - 20-45 HP RANGE

PTO Shaft specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PTO SHAFT - WWCV WIDE ANGLE (ONE SIDE) 1,010MM LZ LENGTH

Find Farm Machinery For Sale from $2,000 to $5,000. Browse 863 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $2,000 to $5,000

Farm Supplies Machinery & Equipment

Sale Price

SAFGARD 7.5L PASTEURISER

GENTECH 7 KVA WELDER PETROL GENERATOR (ELECTRIC START)

BURDER TELEHANDLER HEAVY DUTY FRONT BLADE - 3000MM

DIGGA 16MM AGRICULTURAL 4 IN 1 BUCKET -1550MM FLAT FLOOR - BUCKET-AG-1550

DAKEN CULTIVATOR MODEL 4 ROW 150 GALVANIZED - 03105DC

SOUTHERN CROSS AG MACHINERY 4FT GALVANISED SLASHER, SUIT 18-45HP

SILVAN 1,100L HI FLOW DIESELPAK TRANSFER UNIT

DAKEN PTO WIRE WINDER-82000DC

SILVAN 400L DIESELPAK TRANSFER UNIT

SOUTHERN CROSS AG MACHINERY 4FT OFFSET DISC HARROWS - 12X16 INCH DISCS - 4DH -SUIT 15-35HP

BURDER FEL BLADE WITH REVERSIBLE ROOT RAKE 3000 SERIES 1.35M - 20-45 HP RANGE

SPAREX PTO SHAFT - WWCV WIDE ANGLE (ONE SIDE) 1,010MM LZ LENGTH

Farm Supplies Machinery & Equipment

Dealer Address