Farm Supplies Machinery & Equipment

An implement for the small to mid range tractors which is easy to use but with the strength and reliability to match Australian conditions.
Features:
Hydraulic angle (3x12 ram) allows mouldboard to be angled at up to 45 deg in each direction from the tractor seat. Blade can also be reversed for back filling.
Can be manually offset in seconds to work outside the tractor wheel to the left or right hand side. Maximum of 600mm offset.
Tilt position can be controlled either via a ratchet or optional hydraulics (2 ram model). Allows approximately 30 deg tilt in both directions. Additional holes for the lower linkage arms provide extra tilt for extreme V-draining.
Diverter kits are available to allow 2 ram model to be used on tractors with a single set of remotes.
Heavy duty hardened reversible cutting edges for maximum life.
Optional pneumatic wheelkit available for depth control.
Specifications:
Cutting width: 6ft (1.8m)
Mouldboard thickness: 8mm
Mouldboard height: 450mm
Tractor HP: 30-60
No Offset Positions: 4
Weight: 240kg
Also available:
0415 6ft MD Hydraulic Grader Blade 2 ram (hydraulic angle/tilt)
Options:
0411 Grader Blade Wheel Kit
0419 Boxed ends suit Medium Duty model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MEDIUM DUTY GRADER BLADES 6FT (1.8M) 1 RAM HYDRAULIC ANGLE - 0414, SUIT 30-60HP

Specifications:
Connection Type: Linkage
Min PTO HP: 50
PTO: 40 - 75HP: Series 4.
Product Weight (kg): 107
Gearbox Ratio: 23.18:1 clockwise rotation.
Clutch: 2 x 150mm friction plates (40/50HP), 2 x 200mm friction plates (75HP).
Main Frame: 75 x 75 x 4mm RHS (158PHD30), 100 x 100 x 5mm RHS.
Moutning: Cat. I TPL with Cat. II bushes supplied.
Effective Digging Depth: 1m.
Options:
DCA6 - 6"auger
DCA8 - 8" auger
DCA10 - 10" auger
DCA12 - 12" auger
Ideally suited for a variety of farming purposes including digging post holes and tree planting on lifestyle, medium acreage, broadacre, viticulture and horticultural farms.
Note: Augers are NOT SUPPLIED with the Post Hole Digger
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 50HP POST HOLE DIGGER (AUGERS NOT INCL)

Made in Australia
Features:
- Heavy duty load guard
- Easy hook up with no hinging tynes
- Adjustable latch locked tynes - fixed at top and bottom to prevent bouncing
- Notch positions for multiple tyne spacing's
- Lifting capacity = 1,800 kg
- Tyne size = 40 mm x 100 mm
- Tyne length = 1,070 mm
- Weight = 145 kg
Note: 3PL Pallet Forks come standard with bottom linkage pin set 100 mm above ground level
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC CAT II 3PL PALLET FORKS (1,800 KG)

3.70m Murray Series 03 Levelling Harrow 5 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3807 - 3.70m (12ft 2in) 4/15 Tine, 1/20 Tine - 101kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.70M, 5 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

Designed for small to medium size tractors.
Popular cultivation tool used to break up soil for preparing crops or controlling weeds. Discs can cut up and mix in trash, are very hard wearing, long lasting and easy to use.
Fitted with 28mm (1 1/8in) square high tensile gang bolt axles and high quality triple sealed bearings.
14-18 plate models fitted with 75x75x6mm double beam whilst 10-12 plate models are fitted with main single beam and angle support bracket.
Cat 1/2 linkage.
Clamped on by U-bolts for simple adjustment.
Bellota Boron discs are manufactured under strict quality specifications that ensure the right hardness and uniformity throughout the disc. This includes clamp hardening to prevent distortion, lathe turning of the edges and hardened to 50HRc for low wear and long life.
Features:
No of Discs 12
Disc Diameter 500mm (20inch)
Disc Thickness 4mm
HP (min) 25HP
No. Bearings 4
Working Width 1350mm (4ft 6in)
Weight 335kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MEDIUM DUTY OFFSET DISCS - 12 PLATE X 20 INCH DISCS - 0248, MIN 25HP

4.64m Murray Series 03 Levelling Harrow 5 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3811 - 4.64m (15ft 3in) 4/15 Tine, 2/20 Tine - 134kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 4.64M, 5 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

4.41m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3510 - 4.41m (14ft 6in) 5/12 Tine, 1/16 Tine - 86kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 4.41M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Features:
- Powered by a 6V battery ideal for full independence from a vehicle power source
- The battery pack and motor/fan pack are carried separately on a belt (supplied) to permit freedom of movement for up to 6 hours
- The battery pack is recharged from 240V mains via a supplied recharging unit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN K80S-T5 ASSEMBLY SAFETY SPRAY HELMET

A robust medium duty slasher to suit small to medium size tractors. Australian made using high quality European components. Excellent value for money.
Features:
Body designed to take real punishment. 3mm top plate and strong 6mm thick side panels prevent denting.
Bondioli & Pavesi Series 4 pto driveshaft with 2 plate slip clutch protects slasher and tractor. Optional over-run clutch to suit tractors with single stage clutch.
40 HP oil lubricated Comer gearbox. Optional Italian manufactured gearbox upgrade.
Hardened and tempered stepped/bushed slasher blades.
Available in 5 widths with dual mounting (centre or offset).
Floating headstock for working on undulating ground.
Optional pneumatic wheelkits available for depth control.
Fitted with front and rear chain guards.
Cat 1/2 linkage.
Optional galvanising available.
Full 12 month warranty on design and manufacture.
Specifications:
Dual Mount
Cutting Width 1170mm
Overall Width 1270mm
Overall Length 1270mm
Tractor HP 20-35
Cutting Height 25-100mm
Weight 200kg
Options:
1588UG Italian Manufactured 40HP Gearbox Upgrade
0065 EP Slasher Wheel Kit (Pneumatic Wheel)
0148 Additional over-run clutch (suits tractors with single stage clutch)
0056GAL EP120 with Galvanised Deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS EP120 MEDIUM DUTY SLASHERS 1.2M - 0056- 20-35HP

The T Series range of Climaxx Ramps are built for use with Steel Tracks [including steel tracks with Rubber Pads], and Rubber Tracks. The tread surfaces in this range are robust and are configured to resist damage from tracks.
Ideal for Earthmoving Contractors, Plant Hire Companies, Landscapers, Electrical & Plumbing Contractors, Demolition Companies, Government Departments or any application where tracked machinery must be transported safely and effectively.
Featuring the greatest versatility of the Climaxx range, these models can be used with tyres as well as with tracks. Select from this range where machinery with Tracks as well as machinery with pneumatic tyres are to be loaded.
In situations where Tracks are not used on Ramps, the Climaxx Rubber Series provide a more lightweight and economical option over these T Series Ramps. Smoother ride is also a distinctive feature of the Rubber Series. Please see the table below, for the full range of Climaxx T Series Ramps.
Specifications:
Rated Capacity: 4,800kg
Ramp Mass: 41kg
Ramp Length: 3.3m
Track Width (internal): 450mm
Ramp Width: 560mm
Ramp Depth: 125mm
Features:
Tread Surface of T Series Ramps.
Foot matching Ramp gradient.
Foot adaptable to varying gradients.
Models:
7/3033T - 3,000kg Rated Capacity, 33kg Ramp Mass, 3.3m Ramp Length, 350mm Track Width (internal), 450mm Ramp Width, 110mm Ramp Depth
7/3635T - 3,600kg Rated Capacity, 38kg Ramp Mass, 3.5m Ramp Length, 400mm Track Width (internal), 500mm Ramp Width, 120mm Ramp Depth
7/4040T - 4,000kg Rated Capacity, 47kg Ramp Mass, 4.0m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4536T - 4,500kg Rated Capacity, 42kg Ramp Mass, 3.6m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4536TW - 4,500kg Rated Capacity, 44kg Ramp Mass, 3.6m Ramp Length, 450mm Track Width (internal), 560mm Ramp Width, 125mm Ramp Depth
7/4833T - 4,800kg Rated Capacity, 39kg Ramp Mass, 3.3m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4833TW - 4,800kg Rated Capacity, 41kg Ramp Mass, 3.3m Ramp Length, 450mm Track Width (internal), 560mm Ramp Width, 125mm Ramp Depth
7/6036T - 6,000kg Rated Capacity, 53kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 165mm Ramp Depth
7/7546T - 7,500kg Rated Capacity, 57kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 184mm Ramp Depth
7/9037T - 9,000kg Rated Capacity, 74kg Ramp Mass, 3.7m Ramp Length, 500mm Track Width (internal), 640mm Ramp Width, 200mm Ramp Depth
7/11537T - 11,500kg Rated Capacity, 88kg Ramp Mass, 3.7m Ramp Length, 500mm Track Width (internal), 660mm Ramp Width, 180mm Ramp Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 3.3M, 4,800KG CAPACITY (56CM WIDTH) CLIMAXX T SERIES LOADING RAMP

Jacky Storage Bin Side Discharge - 1,730 litre.
The LA1500/8 Side Discharge JACKY® Hopper Bin design incorporates a poly hopper mounted in a fork-liftable steel stillage. The bin empties through a side opening at the base of the bin, with the slide-hatch mechanism allowing precise control of the discharge rate.
The side discharge JACKY Bin is ideal for bagging feed, feeding out grain
and pellets, filling seed drills and self-feeders, and dispensing into product
blending systems.
The steep slopes and large discharge opening assist
with positive drainage and minimal retention of product in hopper.
With a 45 degree slope from front to back, and 60 degree walls on the side,
the side discharge JACKY Bins evacuate completely, making them ideal for
a wide range of dry, granular products.
Australian made and owned.
Benefits:
- 1200kg/1.73m3 capacity.
- Safe Working Load (SWL) - 1200kg.
- Very low profile bin for height critical applications.
- Ideal for feed and seed storage.
- Large top opening for easy filling and cleaning.
- All working parts are UV stabilised polyethylene or stainless steel for longevity.
- 40° run slope allows the discharge rate of most granular products to be easily controlled.
- Standard colour is Faint Green.
- Serial numbering and custom branding available to assist in tracking batch lots.
Specifications:
- Opening size - base: 295x245mm
- Opening size - top: 1000x1000mm
- Fork Pocket size: 150x100mm
- Fork Pocket Centres: 830mm
- Length: 1400mm
- Width: 1200mm
- Height: 1860mm
- Capacity (Ltrs): 1730
Options:
- Raimo bulk bag dispenser
- Reaper knife blade
- Document holder heavy duty
- Tine pocket 1,000mm (folded 200mm x 100mm)
- Weather flap
- Lever (double sided)
- Lever (left)
- Lever (right)
- Chute 1,000mm
- Chute 280mm
- Chute with 100mm diameter nozzle
- Chute flexible
- Actuator kit 12 volt
- Leg extension to suit
- Clear sightglass point in face of Jacky bin
- Hatch assembly
- Lid to suit
- Eurohitch attachment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JACKY STORAGE 1,730L SIDE DISCHARGE BIN (LOW PROFILE)

The fully galvanised Sabre slasher is built tough in Australia with a strong 5mm pressed deck, floating headstock, friction clutch, adjustable skids and front and rear chainguards. The ideal slasher to suit your compact tractor.
Features:
Suits 20-40 HP tractors
SABRE range of offsettable rotary slashers
5mm galvanized deck
Cat 1
Adjustable skids
Floating top link
PTO driveshaft
Friction clutch
Front & rear chain guards
Gearbox available in red or yellow.
Specifications:
Overall width: 1.5m
Cutting width: 1.4m (4'6")
Weight: 250kg
HP: 20-40
Finish: Galvanised deck
Options:
Combination Friction and Overrun Clutch
50HP Gearbox Option (50HP standard on SBR18-500)
Wheelkit (adjustable)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FIELDQUIP SABRE SERIES SLASHERS 1.5M - GALVANISED DECK, SUIT 20-40HP

Find Farm Machinery For Sale from $2,000 to $5,000. Browse 858 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $2,000 to $5,000

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS MEDIUM DUTY GRADER BLADES 6FT (1.8M) 1 RAM HYDRAULIC ANGLE - 0414, SUIT 30-60HP

SILVAN 50HP POST HOLE DIGGER (AUGERS NOT INCL)

HIMAC CAT II 3PL PALLET FORKS (1,800 KG)

MURRAY SERIES 03 LEVELLING HARROW 3.70M, 5 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

JOHN BERENDS MEDIUM DUTY OFFSET DISCS - 12 PLATE X 20 INCH DISCS - 0248, MIN 25HP

MURRAY SERIES 03 LEVELLING HARROW 4.64M, 5 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

MURRAY SERIES 03 LEVELLING HARROW 4.41M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

SILVAN K80S-T5 ASSEMBLY SAFETY SPRAY HELMET

JOHN BERENDS EP120 MEDIUM DUTY SLASHERS 1.2M - 0056- 20-35HP

SUREWELD 3.3M, 4,800KG CAPACITY (56CM WIDTH) CLIMAXX T SERIES LOADING RAMP

JACKY STORAGE 1,730L SIDE DISCHARGE BIN (LOW PROFILE)

FIELDQUIP SABRE SERIES SLASHERS 1.5M - GALVANISED DECK, SUIT 20-40HP

Farm Supplies Machinery & Equipment

Dealer Address