Farm Supplies Machinery & Equipment

Picket post driver - Steer Beefy.
Marchant Engineering has been manufacturing the Air Driven Picket Post Driver here in Australia since 1987, helping farmers and fencing contractors to build long strained fences in record time. It will drive star posts through bitumen, shale and black soil surfaces as well as ironstone and sandstone.
This air tool has proven its worth in the harsh terrain of Australia, New Zealand, South Africa, UK and now USA were in Texas it is the only hand held tool powerful enough to drive oil pipe into broken limestone, turning a job that took 4 hours per post into a job that takes 12 minutes per post.
It is performance like this and the Driver's versatile size that has made it the perfect tool for a wide range of fencing projects, like temporary fencing for construction sites, putting in roadside reflector posts on highway projects and security fencing for US air force bases in Afghanistan.
Features:
- Beefy Guide
- 2x65mm Dolly
- Standard Air Fittings
- Heavy Duty Frame
Air Supply required for the driver:
- Farmer minimum of 17cfm - 5.5hp
- Contractor minimum 38cfm-11hp
TST Air Hose sizes available at extra cost:
- 1/2inch - Driver end setup
- 1/2inch - Compressor end setup
- 1/2inch - Hose joining set
Options Extras available:
- Striking Dolly - There are 2 dolly's in the box with the driver. A dolly will fatigue between 5,000 to 15,000 posts depending on the type of ground and how the driver is used. Farmers will probably never need another dolly while contractors will break them after continual use. It is advisable to always have a spare dolly so you can continue to use the driver if you break a dolly.
- Chisels
- Bead Breaker
- Drive Kits
- Guides - The standard guide supplied is 54mm. Additional guides are available from 56mm to 145mm bore.
- Plugs to suit 2", 3", 4" and 5" pipe.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MARCHANT ENGINEERING PTY LTD PICKET POST DRIVER - STEER BEEFY

Dimensions : 1,200 L x 1,500 W x 1,600 H
Features:
- Stainless steel chute operation
- All galvanised frame, with forklift channels for easy lift off/on
- Fully water resistant covered lid and weather-proof outlet
- Upgrade with BB12XL XL Extended Leg options to raise discharge height for bag filling and bag hooks.
From Confectionery to Resin Granules, the Bulka Bin continues to provide new solutions to Dry Bulk Storage and Dispensing requirements.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER BULKA BIN 1.2 CUBIC METRE

Features:
- Includes 36m hose reel
- Quality trusted pump Honda powered Blazemaster Pump
- 650 LPM @ head
- Versatile and lightweight
- Easily attach to any flat surface such as a ute tray provision for strap or pin mounting
- Wear pads allow airflow and protect ute tray
- Integrally mounted pump saves tray space
- Adjustable nozzle
Dimensions: 1,680 L x 750 W x 1,070 H
Capacity: 400 L
Made in Australia. Suitable for many applications, from tree watering to fire-fighting and much more.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 400L FIRE FIGHTING UNIT INC 36M HOSE REEL

Made in Australia
Features:
- Easy hook up adjustable latch locked tynes - fixed at top and bottom to prevent bouncing
- Easy hook up with no hinging tynes
- Notch positions for multiple tyne spacing's
- Tyne size = 80 mm x 35 mm
- Suits up to 40 hp
- Weight = 120 kg
Optional "Hook on Bale Spears" also available - see picture/s for example. Price confirmed at time of request.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC KUBOTA BX23 PALLET FORKS (900 KG) SLIDINGTYNES

4.64m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3711 - 4.64m (15ft 3in) 4/15 Tine, 2/20 Tine - 110kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 4.64M, 5 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Specifications:
Connection Type: Linkage
Min PTO HP: 40
PTO: 40 - 75HP: Series 4.
Product Weight (kg): 95
Gearbox Ratio: 23.18:1 clockwise rotation.
Clutch: 2 x 150mm friction plates (40/50HP), 2 x 200mm friction plates (75HP).
Main Frame: 75 x 75 x 4mm RHS (158PHD30), 100 x 100 x 5mm RHS.
Mounting: Cat. I TPL with Cat. II bushes supplied.
Effective Digging Depth: 1m.
Options:
DCA6 - 6"auger
DCA8 - 8" auger
DCA10 - 10" auger
DCA12 - 12" auger
Ideally suited for a variety of farming purposes including digging post holes and tree planting on lifestyle, medium acreage, broadacre, viticulture and horticultural farms.
Note: Augers are NOT SUPPLIED with the Post Hole Digger.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 40HP POST HOLE DIGGER (AUGERS NOT INCL)

Selecta motorised pumping units provide a go anywhere pressure pumping unit in a wide range of sizes and capacities.
Each unit consists of a matched engine and pump, control valve, base plate, hose connections and in most cases pressure gauge as standard equipment.
Features:
Pressure accumulator with pressure gauge
4 stroke, 5.5HP Honda engine GX160
Oil backed BP60/20 diaphragm pump
Direct coupled to motor
Adjustable pressure regulator
1 metre maximum suction lift
Inlet size 25mm
Outlet size 12mm
Pump size 58 L/min
Pressure rate 20 Bar / 290 psi
Height /Width / Depth 470mm / 425mm / 720mm
Weight 24Kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN BP60/20 4 STROKE MOTORISED PUMP - SILVAN - LBA-38C- STROKE, 5.5HP HONDA ENGINE

Series 08 - 3.45m Stump Jump Harrow System with Standard 4 point pull drawbar - Complete Set.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and 4 Point Pull Drawbar.
8104 - 4 Section with bar 3.45m (11ft 4in).
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 3.45m (11ft 4in)
- Weight 204kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 3.45M STUMP JUMP HARROW WITH STD 4 POINT PULL DRAWBAR COMPLETE SET- SERIES 08

Log Bucket 8000 series (with bolt on removable sides) - 1.50m.
The log bucket is designed for transporting logs and other similar objects.
Specifications:
- Width (m): 1.50m
- HP Range: 50-100
- Struck Capacity (m3): 0.39
- Rated Capacity (m3): 0.46
- Dimensions LxWxH (mm): 1560 x 750 x 660
- Weight (kg): 220
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER LOG BUCKET 8000 SERIES 1.50M - 50-100HP RANGE

Farm Aid heavy duty stick rakes are entirely Australian products, designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction. They are built to serve and built to last.
Features:
Heavy duty 75mm x 75mm angle bottom linkage mounts
75mm x 50mm RHS Main frame
Double frame added for added strength
Anti-kick bar fitted for greater strength, greater production for tines and minimise tine breakage
3/4in or 1in special spring steel round curved tines
Tines spaced 6in apart other spacing available on request
Tines float independently approx 90mm max vertical movement
Rakes sit higher, approx 650mm clearance
allowing more debris to be collected.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID STICK RAKES (HEAVY DUTY) - 7FT - FARM AID - FA205

4.87m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3412 - 4.87m (16ft) (24 Row) - 3/9 Tine, 3/12 Tine - 94kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 4.87M, 3 RANK DEEP SECTIONS & STD DRAWBAR-HEAVY DUTY-COMPLETE SET

The stump jump chisel plough is an ideal tool for primary cultivation. The spring action of the tines and chisel points have been proven to penetrate where many other machines find conditions too hard.
Features:
5 Tines at 12 adjustable spacings.
Heavy Duty 75x75x6mm Frame.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Horsepower requirement is approximately 8-10 HP per tine.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18)
Optional Points Available:
Depth Wheels (Pair Holden)
10x8mm Dart Point
16x8mm Sweep
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS STUMP JUMP CHISEL PLOUGHS 5'9" (1.75M) WIDTH - 0192

Find Farm Machinery For Sale from $2,000 to $5,000. Browse 847 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $2,000 to $5,000

Farm Supplies Machinery & Equipment

Sale Price

MARCHANT ENGINEERING PTY LTD PICKET POST DRIVER - STEER BEEFY

POLYMASTER BULKA BIN 1.2 CUBIC METRE

POLYMASTER 400L FIRE FIGHTING UNIT INC 36M HOSE REEL

HIMAC KUBOTA BX23 PALLET FORKS (900 KG) SLIDINGTYNES

MURRAY SERIES 03 LEVELLING HARROW 4.64M, 5 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

SILVAN 40HP POST HOLE DIGGER (AUGERS NOT INCL)

SILVAN BP60/20 4 STROKE MOTORISED PUMP - SILVAN - LBA-38C- STROKE, 5.5HP HONDA ENGINE

MURRAY 3.45M STUMP JUMP HARROW WITH STD 4 POINT PULL DRAWBAR COMPLETE SET- SERIES 08

BURDER LOG BUCKET 8000 SERIES 1.50M - 50-100HP RANGE

FARM-AID STICK RAKES (HEAVY DUTY) - 7FT - FARM AID - FA205

MURRAY SERIES 03 LEVELLING HARROW 4.87M, 3 RANK DEEP SECTIONS & STD DRAWBAR-HEAVY DUTY-COMPLETE SET

JOHN BERENDS STUMP JUMP CHISEL PLOUGHS 5'9" (1.75M) WIDTH - 0192

Farm Supplies Machinery & Equipment

Dealer Address