Farm Supplies Machinery & Equipment

Series 38 Manual winch rigid frame with 2 section rigid S44 Broadacre Stump Jump Harrow. 1.72m. Transport width: 1.79m.
Centre Frame only, no wings, winch, locking pins or hinges included.
Please note that 3 point linkage pins are not supplied.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1.72M MANUAL RIGID FRAME BROADACRE STUMP JUMP HARROW

Compact model is designed for small horsepower tractors where linkage arms have limited lifting height.
Features:
Fitted with high quality European gearboxes and drive shafts. All shafts are fitted with a torque limiting clutch (tractor end) which is more effective than a slip clutch.
Digs to a maximum 4ft (1200mm) depth if ground conditions permit.
Standard model is suitable for augers from 4in to 12in diameter.
All models are fitted with jib hook and transport chain as standard. Heavy duty model is also fitted with auger control handle for easy positioning.
Specifications:
PTO Shaft: Series 3/L2 torque limiting clutch
Gearbox: 40HP
Main frame: 100x50x6mm
Tractor Hp Required: 16-30HP
Nett Weight less auger: 85kg
Options:
0279 4 auger
0265 6 auger
0267 8 auger
0269 10 auger
0271 12 auger
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS POST HOLE DIGGERS COMPACT - 0258

Suitable for many applications, from general water carting to tree watering, fire-fighting and chemical cartage.
- Forklift galvanised skids available
- Tough and durable one-piece moulding
- Translucent (to see water level)
- Sits directly on any flat surface
- 40mm brass outlet
- High strength, lightweight polyethylene construction
- Provision for strap or pin mounting
- 400mm 1/4 turn hinged lid
Dimensions : 1,540 W x 2,280 L x 1,270 H
Capacity : 3,000 L
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 3,000L WATER CARTAGE TANK

The Wheel Riser series ramps are the latest addition to the Climaxx Aluminium Ramp range. As with all the Climaxx ramps, they are made from Aluminium, ensuring ease of positioning and transport. These service ramps are built for raising Heavy Vehicles off the ground for a variety of uses.
The Wheel Riser series ramps are specifically designed for applications where access to the underside of heavy vehicles is either difficult or restricted. The Climaxx Wheel Riser Ramps are suited but not limited to the following applications:
- Service Centres
- Loading Docks
- Heavy Vehicle Wash Bays
- Heavy Vehicle Inspection Areas
The Wheel Riser ramps are built to comply with the Australian Standard AS. 2640:2016. Released in 2016, this standard outlines stringent requirements in which portable ramps are to be designed and manufactured in accordance with. This standard was released as a result of sub-standard products being used which resulted in fatal injuries.
With over 40 years of experience manufacturing Loading Ramp solutions, we have designed a safe and compliant service ramp product to meet the industry requirements.
Specifications: A, B, C & D shown in picture diagram.
Rated Capacity per Axle: 7,500kg
Ramp Length (A): 1.42m
Raised Bed Length (B): 2170mm
Height of Raised Bed (C): 250mm
Height of Raised Bed Including Ramp (D): 302mm
Ramp Tread Width: 600mm
Overall Ramp Width: 700mm
Models:
WR7522-40 - 7,500kg Rated Capacity, 1.42m Ramp Length, 770mm Raised Bed Length, 250mm Height of Raised Bed, 302mm Height of Raised Bed Including Ramp, 400mm Ramp Tread Width, 500mm Overall Ramp Width.
WR7522-60 - 7,500kg Rated Capacity, 1.42m Ramp Length, 770mm Raised Bed Length, 250mm Height of Raised Bed, 302mm Height of Raised Bed Including Ramp, 600mm Ramp Tread Width, 700mm Overall Ramp Width.
WR7536-60 - 7,500kg Rated Capacity, 1.42m Ramp Length, 2,170mm Raised Bed Length, 250mm Height of Raised Bed, 302mm Height of Raised Bed Including Ramp, 600mm Ramp Tread Width, 700mm Overall Ramp Width.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 7.5 TONNE WHEEL RISER RAMP WITH 217CM BED, 1.42M RAMP (70CM RAMP WIDTH)

Heavy duty strength at a light duty price.
Features:
Fitted with high tensile 50mm main pivot pin to minimise wear and tear and avoid breakage.
24 angle positions to both right and left allowing blade to work outside the tractor wheel, even at an angle.
Blade rotates 360 degrees allowing forwards and backwards operation.
Adequate tilt via the linkage pin position and tractor levelling box.
Curved 10mm thick mouldboard for strong cuts at the correct angle and high clearance for greater capacity.
Hardened, reversible cutting edges (as used on road graders).
Optional Holden depth wheel (at additional cost) with either manual ratchet or hydraulic adjustment.
Available in 6ft (1.8m), 7ft (2.1m) and 8ft (2.4m) widths.
12 Month Warranty against faulty materials or workmanship.
Specifications
Cutting Edge Width: 6ft (1.8m)
Mouldboard Thickness: 10mm
Mouldboard Height: 500mm
No Offset Positions: 8
No Angle Positions: 24
Tractor HP: 40-100
Category-3 Point Linkage: Cat 1/2
Weight: 305kg
Also available:
0036 7ft Grader Blade HD Model
0037 8ft Grader Blade HD Model
Options:
0026 Wheel kit suit Hyd/EH/HD G.Blade, Manual ratchet link
0027 Wheel kit suit Hyd/EH/HD G.Blade, Hydraulic c/w Rams & Hoses
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS HEAVY DUTY GRADER BLADES 6FT (1.8M) - 0035, SUIT 40-100HP

142 L/min pump with Male - Male shaft.
Silvan APS series high pressure diaphragm pumps are built for 540 RPM operation, are self-priming and feature a corrosion resistant cast anodised aluminium body. Tough and reliable they will run dry without risk of damage.
All pumps are supplied with appropriate hose connections, mounting base plates and 1 3/8 six splined shaft.
Specifications:
Pump Size (L/min): 142
Height / Width / Length (mm): 420 / 380 / 342
Product Weight (kg): 46
Max pressure : 5,000 (kPA)
Shaft: Male - Male
Diaphragms: 4
HP required at Max pressure: 18
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN HIGH PRESSURE DIAPHRAGM PUMP (142 LPM, MALE - MALE)

The stump jump chisel plough is an ideal tool for primary cultivation. The spring action of the tines and chisel points have been proven to penetrate where many other machines find conditions too hard.
Features:
7 Tines at 12 adjustable spacings.
Heavy Duty 75x75x6mm Frame.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Horsepower requirement is approximately 8-10 HP per tine.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18)
Options:
Depth Wheels (Pair Holden)
10x8mm Dart Point
16x8mm Sweep
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS STUMP JUMP CHISEL PLOUGHS 7'9" (2.3M) WIDTH - 0194

Series 08 - 3.45m Stump Jump Harrow System with Standard 4 point pull drawbar - Complete Set.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and 4 Point Pull Drawbar.
8104 - 4 Section with bar 3.45m (11ft 4in).
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 3.45m (11ft 4in)
- Weight 204kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 3.45M STUMP JUMP HARROW WITH STD 4 POINT PULL DRAWBAR COMPLETE SET- SERIES 08

Specifications:
Connection Type: Linkage
Weight: 104kg
Height / Width / Length (mm): 930 / 1100 / 1100
Capacity: 400L
Width of Throw: 6-14m
Key Features:
Construction: Heavy duty construction for long service life. The hopper is manufactured from non-corrosive UV stabilised impact resistant polyethylene. The frame is made of galvanised, high strength tubular steel. Spout formed from fibreglass reinforced nylon.
Drive Line: Quality PTO driveshaft with approved safety cover. Continuous stroke flywheel with spring loaded drive coupling. Oscillating mechanism operates in oil bath for long service life.
Height Control: Single lever control for adjusting spreading volumes. Two spouts supplied for banding. Long agitator supplied as standard.
The oscillating spreader is designed for precise application of fertiliser and seed at medium to low rates. The oscillating spout will apply product accurately from 5 to 14 metres depending on material being spread as well as left or right hand banding. Spreader is supplied with spouts for banded spreading for either 3 metre or 7 metre wide rows. (Note: Banded spreading will still allow some product to spread in centre)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 400 LITRE OSCILLATING SPREADER -RON-SQTF400

Made in Australia
Features:
- 6 mm high grade plate shell
- Gravity pour delivery
- Cost effective concrete solution
- Heavy duty Aussie construction
- Built-in spill prevention plate
- Euro Hitch standard. Other Hitches available at cost
Dimensions:
Width = 1,200 mm
Capacity = 0.5 m3
Chute Width = 300 mm
Loaded Weight = 1,380 kg
Unladen Weight = 228 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH CONCRETE KIBBLE BUCKET (1/2 M3)

Specifications are shown in images.
The PF1800 high capacity pallet forks built to make life on a construction site that bit easier!
Material handling around a construction site demands a great deal of flexibility. Heavy duty construction, the precision mounting plate and various other ingenious features make our Pallet Fork attachment for the skid steer loader a must have item. The ideal solution for locations where pallet handling is needed but the site is unmade or too rough for a forklift truck. The PF1800 can hold a weight capacity of 1,800kg.
Features:
- Fully adjustable Tines with locking pins.
- Tines are fixed at the top and heel preventing bouncing while carrying loads.
- Sidestep for easy entry and exit of the cab.
- High visibility brick guard giving you good vision whilst loading and unloading - crucial in a safety conscious age.
- Auger Torque pallet fork tines are manufactured to ISO2328:2011 / AS2359.11-1995 and ISO2330:2002 / AS2359.14:2005 standards
- Auger Torque fork mounting frames are engineered and tested for strength and longevity
- Can be disassembled and packed into a compact storage space when not in use.
Options:
- Standard or Euro hook
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AUGER TORQUE 1,800KG PALLET FORKS (122CM TINES)

Australian Made.
- Fully tested polyethylene tank designed to withstand ground and water pressure at depth
- Engineered by geotechnical experts including finite element analysis (FEA)
- Certified to AS/NZS 4766 Rainwater tank standard
- Certified to AS/NZS 1546
- Sealed locking tamper-proof lid
Dimensions : 3,520 L x 1,640 W x 1,665 H
Capacity : 5,000 L
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 5,000L UNDERGROUND TANK (ONLY)

Find Farm Machinery For Sale from $2,000 to $5,000. Browse 863 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $2,000 to $5,000

Farm Supplies Machinery & Equipment

Sale Price

MURRAY 1.72M MANUAL RIGID FRAME BROADACRE STUMP JUMP HARROW

JOHN BERENDS POST HOLE DIGGERS COMPACT - 0258

POLYMASTER 3,000L WATER CARTAGE TANK

SUREWELD 7.5 TONNE WHEEL RISER RAMP WITH 217CM BED, 1.42M RAMP (70CM RAMP WIDTH)

JOHN BERENDS HEAVY DUTY GRADER BLADES 6FT (1.8M) - 0035, SUIT 40-100HP

SILVAN HIGH PRESSURE DIAPHRAGM PUMP (142 LPM, MALE - MALE)

JOHN BERENDS STUMP JUMP CHISEL PLOUGHS 7'9" (2.3M) WIDTH - 0194

MURRAY 3.45M STUMP JUMP HARROW WITH STD 4 POINT PULL DRAWBAR COMPLETE SET- SERIES 08

SILVAN 400 LITRE OSCILLATING SPREADER -RON-SQTF400

HIMAC EURO HITCH CONCRETE KIBBLE BUCKET (1/2 M3)

AUGER TORQUE 1,800KG PALLET FORKS (122CM TINES)

POLYMASTER 5,000L UNDERGROUND TANK (ONLY)

Farm Supplies Machinery & Equipment

Dealer Address