Farm Supplies Machinery & Equipment

Painted ACS-STS Series Rotary Slasher. Side Throw Model.
Available in AHS and ACS series Slashers.
Features:
- 180cm cutting width
- Italian manufactured high ratio gearbox (54HP)
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- Lifting throw blades
- Swing back blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- 8 series European driveshaft with integral 4 plate clutch
- Twin height control wheel
Optional Extras:
- Slasher galvanised (4WACS180STSG)
- Chain guard front & rear
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM PAINTED 180CM SIDE DISCHARGE ROTARY SLASHER (54HP) - ACS-STS SERIES

The heavy MU-H Vario series is the robust universal mulcher for green area maintenance for tractors and special system vehicles up to 90 hp.
This work horse for daily use in the widest possible range of mowing and mulching work has side shift, front and rear mounting, heavy fully proven universal M-Hammer flails and the patented "Shark fin" shredding bar system as standard.
Consequently this mulcher is not only capable of working perfectly on lawns, meadows and overgrown areas but also on fallow surfaces with woody growth and light scrub. The biomass is heavily shredded and spread evenly over the surface behind the roller.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat. I + II for Front or Rear mounting with mechanical side shift; MUL 180 280: 56 cm (as shown)
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards
Carbide wearing skids (removable)
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Hydraulic side shift (MU-H 220 Vario: 56cm)
Shock absorbing linkage springs (for front mount recommended)
MU-SOFA weight transfer system, recommended for font-mounted machines
Double free wheel gear box for PTO rotational direction
Modification of r.p.m/rotation direction
Rotor with triple Y-blades - additional charge
Rotor with triple M shackle flails - additional charge
Dust protection for front mounting MU-H 180 -220 Vario
Second patented removable shredding bar system: "Shark Fin"
Hood wearing plate (factory mounted)
Model:
MU-H 120 WW 1200mm Overall width 1370mm Max hp 90 Weight 380 kg Flails 10
MU-H 140 WW 1400mm Overall width 1570mm Max hp 90 Weight 400 kg Flails 12
MU-H 150 WW 1500mm Overall width 1670mm Max hp 90 Weight 415 kg Flails 12
MU-H 160 WW 1770mm Overall width 1770mm Max hp 90 Weight 430 kg Flails 14
MU-H 180 WW 1970mm Overall width 1970mm Max hp 90 Weight 530 kg Flails 16
MU-H 200 WW 2200mm Overall width 2370mm Max hp 90 Weight 505 kg Flails 18
MU-H 220 WW 2200mm Overall width 2370mm Max hp 90 Weight 575 kg Flails 18
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H VARIO 150 MULCHER (35-90HP) FRONT OR REAR MOUNT

Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
Features on our Mulchers make the full range stand out from the opposition.
The AMM series is a medium duty mulcher suitable for pastures and crops. Residues are finely chopped and the swath evenly spread over the ground providing a mulch to improve soil moisture retention and seed germination.
Features:
- 195cm cutting width
- European gearbox (40HP)
- Clevis hitch cat 1 three point linkage.
- Chain top link.
- 4mm Body panel to withstand obstacle impact.
- Blades pivoting on hardened bushes and grade 8 bolts.
- Adjustable height skids.
- Built-in mulching bar.
- 6 series European driveshaft comes with integral clutch
Optional extras:
- Friction clutch
- Height roller
- Twin height wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM MULCHER AMM SERIES 195CM (40HP) - AMM/195

Banana AHM Mulcher - 240cm - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
Wheat, Maize, Sorghum, Rice and Cotton stubble. Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
Pruning: Macadamia, Grapes, Banana plants & Avocados
These models are also fitted with a heavy duty Rotor and additional body panels.
Banana farmers have 4 sizes to chose from; AHM160-B, 195-B, 240-B & 285-B.
Features:
- European Gearbox (70HP)
- SPBX Section American V Belts
- Double Skin Body
- High Blade Tip Speed for Optimum Mulch
- Y Blades Pivot on Hardened Steel Bushes
- 220mm diameter Rotor Tube
- Taperlock Rotor Bearings 55mm capacity
- Six Row Blade Configuration
- Cat 1 & 2 Clevis Hitch 3PL
- Fully Adjustable Rear Flap 500mm maximum opening
- 8 Series European Driveshaft c/w Integral Clutch
- Floating Top Link to Follow Undulations
- 1000 PTO kit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM BANANA MULCHER AHM SERIES - 240CM (70+HP REQ) - AHM/240-B

This heavy duty professional range for tractors of up to 120 hp with side shift and front (or rear) mounting is the entry level to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-L Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat.
I + II for Front or Rear mounting with mechanical side shift;
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar.
System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standard
Carbide wearing skids (removable).
Adjustable Vario Intake Bar - cutting bar.
Options:
Hydraulic side shift (56cm lifting range).
Shock absorbing linkage springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modifications of r.p.m /rotation direction.
Rotor with triple Y-blades (additional charge).
Rotor with m shackle flails (additional charge).
Scraper bar for displaced support roller MU-L Vario.
Second Patented removable shredding bar system "Shark Fin".
Hood wear plate (Factory mounted).
Model:
MU-L 180 1800mm 120 HP WW 1800mm Overall width 1970mm Weight 530kg Flails 16
MU-L 200 2000mm 120 HP WW 2000mm Overall width 2170mm Weight 570kg Flails 16
MU-L 220 2200mm 120 HP WW 2200mm Overall width 2370mm Weight 610kg Flails 18
MU-L 250 2500mm 120 HP WW 2500mm Overall width 2670mm Weight 670kg Flails 22
MU-L 280 2800mm 120 HP WW 2800mm Overall width 2970mm Weight 790kg Flails 24
As shown in illustration - MUL 180 280: 56 cm.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-L VARIO 250 MULCHER - SUITS 45-120HP (FRONT OR REAR MOUNT)

13,500L Cone Bottom Tank on Stand.
Specifications:
Total height: 3700mm
Inlet height: 3500mm
Diameter: 2500mm
Features:
15 degrees cone bottom and full drain bung for total evacuation of contents
Ribbed sidewall tanks for superior strength
Self supporting roof with no internal fixtures or supports
2" complete draining Banjo fitting installed on all tanks (Optional 3" available)
3 Positive tie down points / lifting lugs
Heavy duty galvanised steel frame (Complete stainless steel stands available on request)
Supplied in translucent green colour so level of contents can be seen (Also available in black)
450mm hinged & vented lid
Rated for 1.5SG liquids
Stand also available with forklift slippers for safe and easy lifting when empty.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 13,600L CONE BOTTOM TANK ON STAND

M129 Mixer (2,000kg) as advertised. Also available in the following alternate sizes...
M79 = 1,000 kg
M189 = 3,000 kg
Electric 7.5 kw motor
Barrel diameter for each model are as follows...
M79 = 1.37 m
M129 = 1.53 m (this model)
M189 = 1.83 m
Overall Height for each model is as follows...
M79 = 2.9 m
M129 = 3.45 m (this model)
M189 = 3.75 m
Keep your feed fresh with the most nutritional value by crushing and mixing your own.
Determine your own mix to suit your livestock needs.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JAS SMITH M129 SEED / FEED MIXER - 2,000KG

Experience the full power of the STOLL ProfiLine Next Generation. The amazing best values in all areas ensure the highest quality in lifting capacity and lifting height, stability and loading speed. In addition to this, the individually selectable accessories from the ProfiLine Next Generation fit in perfectly with your needs as a farmer or contractor. True professionals for professionals.
German engineering is known all around the world for its high quality, performance and reliability. That is why we develop all STOLL front loaders with precisely these values in Germany. They combine state-of-the-art technology with innovative solutions and this is exactly what we expect from high-quality German products.
All Stoll FZ Loaders include Premium Internal Self Level System, 3rd Function and Manual Soft Ride, Single Lever Joystick, 2 Bank Valve and tractor hydraulics, Rams Horns Bump Guard and Subframe kit.
FZ45 Specifications:
Oil Flow: 41 - 29
HP Range: 90 - 140
Buckets That Suit This Loader:
2.05, 2.2, 2.4 Heavy Duty Gravel Bucket
2.1 - 8000, 2.1 - 9000 Heavy Duty 4 in 1 Bucket
Loader Options:
- 4th function
- Hydro fix - attachments per circuit
- Hydro fix - attachment side only
- Electric comfort drive upgrade
- Return to level
- Plus function
- Colour code sticker set
- Hydraulic quick change
- Full mesh grille guard
Control Options:
- Hoses to mid remotes
- Double rear diverter upgrade
- Tap and tee manual
- Pro control joystick system upgrade
Further Information on this Loader:
Full Power - Maximum Stable Construction:
- The ProfiLine FZ front loaders are made of fine grain steel - Advantage: Highest stability with maximum torsional rigidity at the same time.
- The lifting arm boom is bent from a single piece of steel - The control rods are installed inside the beam. All the hydraulic lines are well protected but can be freely accessed under the beam.
- Kinematics of the entire swing arm body adapted to modern tractors. This results in optimum positioning of the swing arm to relieve the front axle and the best possible clearance for steering angle and axle swing path.
- In order to avoid the need to regularly replace the hose lines by the lifting arms in accordance with DIN 20066, we use wear-free steel hydraulic pipes instead.
Stoll Attachment Components - less load on the tractor and a greater accurate fit:
- The attachment components can be installed perfectly on all common tractors that is why the designers at STOLL individually adapt every tractor model.
- Reduced load on the front axle thanks to the optimal positioning of the attachment components close to the drivers cab. This shifts the centre of gravity of the entire front loader to the centre of gravity of the tractor.
- Often the windscreen can only be opened together with a STOLL attachment component.
- The attachment components fit perfectly as they are individually adapted to each tractor.
Z-Kinematics - best view and high performance:
- The rods of the mechanical parallel guide are located in the lifting arm booms - the basis of the Z-kinematics.
- This frees up the view for the driver. No parts above the lifting arms obstruct or are in the way. Another benefit: The front loader can also be mounted closer to the drivers cab - result: Reducing the load on the tractor by optimally positioning the attachment components.
- Front loaders with Z-kinematics have even greater lift capacities and breakout forces. There is no loss of lifting power.
Convincing benefits for you:
- The various front loader models fit perfectly on tractors from 50 to over 300 hp.
- Best quality fine-grained steel for a front loader with high torsional rigidity and stability.
- The extremely high values for the lifting capacity and height are impressive.
- Z-kinematics and the optimally positioned cross tube provide the driver with the best view of the implement.
- For maintenance work, all you need is a commercially available spanner to get to the lines.
- Best equipment for optional features so you can work with even greater efficiency:
- Return-to-level, rapid emptying and re-scooping.
- Re-scooping series.
- Depending on the loader model, quick release frames are available for other coupling systems STOLL offers full flexibility.
So much more information included in the pictures!
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER STOLL FZ45 FRONT END LOADER (90 - 140 HP) (41 - 29 LPM)

The Nobili TLP mulchers are suited to low horsepower tractors up to 30HP for grass with cutting height maintained by the rear roller.
Features:
Suggested Use: Grass mowing only.
Construction: Low profile body, no opening tailboard.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with overrun clutch, taper locked pulleys and electronically balanced rotor.
Control: Fixed headstock.
Attachment: Cat. I and II three point linkage.
Height Control: Roller (standard fitment).
Specifications:
Connection Type: Linkage
HP: 25-60
Y Blades Standard
Working Width (mm): 1600
Weight (kg): 1205
Dimensions WxHxD (mm): 1750W 460H 760D
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI TLP PASTURE MULCHERS 1.6M - TLP160/06, SUIT UP TO 30HP TRACTOR

The Flex Wing Topper is a three point linkage mounted machine which folds up to 2.3m (7ft 6in) transport width.
Like all MAJOR machines, the Flex Wing Topper is of robust construction. CE conformity is achieved through full PTO guarding and heavy rubber skirting to prevent debris from escaping.
The wing cutting decks are raised by hydraulic control to transport position. The wings are capable of flexing from -15 to +25 degrees allowing the cutting unit to follow the ground contours.
Contra-rotating swinging blades are retained in hardened steel bushings and clamped by sprung steel blade backs.
Under-sole discs are fitted to prevent scalping and ensure a perfect finish every time.
Features:
Robust pivot points
Rubber shock absorbers
Slip clutch PTO protection
Hydraulic wing lift
ProCut swinging blades
88mm (3 1/2in) blade overlap to eliminate striping.
Model:
MJ38-540 5.4m (18ft) 1,395 kg 60-160HP 6 Rotors 50-250mm Cutting Height
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR FLEX WING TOPPER SERIES MJ38-540,60-160HP

MUTHING MU-H VARIO 160 MULCHER (35-90HP) FRONT OR REAR

Suitable for ROPS and CAB (optional). 

The Burder loader series are built to be tough, agile and performs well even under extensive usage.

The Burder loader series comes with a multitude of features such as return to level, soft ride and quick change. These features helps to promote safety, efficiency and productivity in the work environment. As the industry evolves, consumers require more complex features in the loaders in order to enhance productivity in the work environment.

Burder invests resources in R&D to ensure consumer demands are met as well as constantly creating designs that exceed expectations.

BURDER 1.5M FRONT END LOADER (50-100 HP)

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 894 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

AGRIFARM PAINTED 180CM SIDE DISCHARGE ROTARY SLASHER (54HP) - ACS-STS SERIES

MUTHING MU-H VARIO 150 MULCHER (35-90HP) FRONT OR REAR MOUNT

AGRIFARM MULCHER AMM SERIES 195CM (40HP) - AMM/195

AGRIFARM BANANA MULCHER AHM SERIES - 240CM (70+HP REQ) - AHM/240-B

MUTHING MU-L VARIO 250 MULCHER - SUITS 45-120HP (FRONT OR REAR MOUNT)

RAPID PLAS 13,600L CONE BOTTOM TANK ON STAND

JAS SMITH M129 SEED / FEED MIXER - 2,000KG

BURDER STOLL FZ45 FRONT END LOADER (90 - 140 HP) (41 - 29 LPM)

NOBILI TLP PASTURE MULCHERS 1.6M - TLP160/06, SUIT UP TO 30HP TRACTOR

MAJOR FLEX WING TOPPER SERIES MJ38-540,60-160HP

MUTHING MU-H VARIO 160 MULCHER (35-90HP) FRONT OR REAR

BURDER 1.5M FRONT END LOADER (50-100 HP)

Farm Supplies Machinery & Equipment

Dealer Address