Farm Supplies Machinery & Equipment

7,000L Cone Bottom Tank on Stand.
Specifications:
Total height: 2280mm
Inlet height: 2080mm
Diameter: 2500mm
Features:
15 degrees cone bottom and full drain bung for total evacuation of contents
Ribbed sidewall tanks for superior strength
Self supporting roof with no internal fixtures or supports
2" complete draining Banjo fitting installed on all tanks (Optional 3" available)
3 Positive tie down points / lifting lugs
Heavy duty galvanised steel frame (Complete stainless steel stands available on request)
Supplied in translucent green colour so level of contents can be seen (Also available in black)
450mm hinged & vented lid
Rated for 1.5SG liquids
Stand also available with forklift slippers for safe and easy lifting when empty.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 7,000L CONE BOTTOM TANK ON STAND

Painted Agrifarm ACS Slasher. Extra heavy duty slasher for contractors, local government bodies and farm clearing work.
Note: Picture shows galvanised model.
Features:
- 150cm cutting width
- Italian Manufactured High Ration Gearboxes (125HP)
- 8 series drive shaft with 4 plate friction clutch.
- High ratio gearbox produces optimum blade tip speed.
- Heavily reinforced 5mm body, galvanizing option.
- Swing back blades
- 300mm underbody clearance to handle the heaviest crop.
- Floating headstock slasher follows ground profile.
- Laminated Bisalloy blade beam offset suction lift blades.
- Front & rear chain curtains standard
- Cat 1 & 2 Clevis Hitch 3PL
- Pivoting RHS Tube Headstock with Chain Backstays (150,180)
Optional Extras:
- Slasher galvanised (4WACS150-G)
- Chain guard rear
- Height wheels - single
- Height wheels - twin
- Roller kit
- Support stand Complete
- Support stand Mtg tube only
- Body corner guards
- Council rear sign holder
- Council knapsack holder
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM PAINTED 150CM ROTARY SLASHER (125HP) - ACS SERIES

Built tough, this generator is fitted with all the specifications required for the mine site and is first when it comes to mining safety.
Features:
Detachable fire extinguisher
Battery Isolator switch
Individual lockable RCD switches
15amp weatherproof outlets
Emergency stop button
Bunded fuel tank with lockable cap
Centre point lifting bar
Specifications:
Power Rating: 6.8kVA
Cont. Output Watts: 5400
Engine Model: Yanmar L100N5
Phase: Single Phase
Engine Horsepower: 8.8hp
Starting System: Recoil/Electric
Fuel Tank Capacity: 36L
Noise Level: 80dBA
Outlets: 2x 15Amp
Operation Hours: 21hrs
Fuel Type: Diesel
Dimentions: 876mm x 546mm x 700mm
Weight: 160kg
Optional Extras:
10-N8-WK400-009 - Heavy duty 4 x 400 diameter wheels with 2 x axles.
80-EARTH STAKE - Copper earth stake with earth cable.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 6.8 KVA GENTECH MINE SPEC DIESEL GENERATOR (ELECTRIC START)

Forest AHM Mulcher - 160cm - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
Wheat, Maize, Sorghum, Rice and Cotton stubble. Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
Pruning: Macadamia, Grapes, Banana plants & Avocados
The Forestry model is suitable for scrub clearing, forest trails and under powerline regrowth control.
These models are also fitted with a heavy duty Rotor and additional body panels
Mulchers for Forestry models are available in 3 sizes: AHM160-F, 195-F & 240-F
Features:
- Double skin steel body panels to withstand obstacle impact.
- European gearbox (70HP)
- Clevis hitch cat 1&2 three point linkage.
-4 x SPBX Section belt rotor drive on large diameter pulleys for optimum blade tip speed.
- Series 7 drive shaft with friction clutch.
- Floating top link.
- 220mm (9) diameter rotor tube with 6 row blade configuration to reduce power requirements and even out belt loadings.
- Blades pivoting on hardened bushes and grade 8 bolts.
- 55mm taper lock rotor support bearings.
- Fully adjustable rear flap to control swath spread.
- Adjustable height skids.
- 1000 PTO Kit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM FOREST MULCHER AHM SERIES -160CM (70+HP) - AHM/160-F

Banana AHM Mulcher - 285cm - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
Wheat, Maize, Sorghum, Rice and Cotton stubble. Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
Pruning: Macadamia, Grapes, Banana plants & Avocados
These models are also fitted with a heavy duty Rotor and additional body panels.
Banana farmers have 4 sizes to chose from; AHM160-B, 195-B, 240-B & 285-B.
Features:
- European Gearbox (85HP)
- SPBX Section American V Belts
- Double Skin Body
- High Blade Tip Speed for Optimum Mulch
- Y Blades Pivot on Hardened Steel Bushes
- 220mm diameter Rotor Tube
- Taperlock Rotor Bearings 55mm capacity
- Six Row Blade Configuration
- Cat 1 & 2 Clevis Hitch 3PL
- Fully Adjustable Rear Flap 500mm maximum opening
- 8 Series European Driveshaft c/w Integral Clutch
- Floating Top Link to Follow Undulations
- 1000 PTO kit
- Twin 360 degrees castor rear wheels standard
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM BANANA MULCHER AHM SERIES - 285CM (85+ REQHP) - AHM/285-B

The Rotary Disc Mower is the ideal machine for reaping all kinds of Fodder in preparation for bailing. The hydraulic suspension lowers the cutter bar on the pasture. Then the 6 rotary disc blades start spinning. As the tractor passes over the pasture, the 3 blades on each disc cut through the grass evenly leaving a clean path for bailing as shown in the photos.
Rotary Disc Mower. Mow Silage and Hay with Low Horsepower Requirements.
Grass and oat harvesting in preparation for baling hay takes time and resources. As such, many Australian farmers require a reliable mower that can go through grass and oats swiftly while having low power requirements.
The T-DCBM Rotary Disk Mower, which provides the ideal solution for mowing grass and oats on either flat or uneven ground. This disc mower is designed to cut through large grass areas without draining the fuel tank.
- Dependable cutter bar - The cutter bar has a high oil capacity that ensures low working temperature and avoids overheating in prolonged operations.
- Comes with a safety mechanism that reduces damage to the machine in the event of a collision with hard/solid objects by allowing the cutter bar to move backward, out of the way.
- Round Discs - round cutting discs designed to be less susceptible to stone impact and reduces the shock in the transmission. Each round disc sports 3 cutting blades resulting in an efficient cut.
- Reliable Hydraulic Suspension - The hydraulic suspension provides complete control and precision. The suspension enables efficient cutting on even and uneven ground for a uniform size of fodder collected at the rear of the machine.
- Superior Efficiency, Lower Power Consumption - Energy efficiency saves you time and money while boosting productivity. Harvest more grass without consuming more fuel.
T-DCBM 6 requires min of 60HP.
Weight = 520kg
Not all mowers can handle sloping terrain that may interfere with the process and damage the equipment. Objects like rocks may jam the gears inside, which is costly to repair and maintain.
Thats why we have the T-DCBM Rotary Disk Mower as your cost-effective, adaptable grass-cutting solution to cut grass in any field. It has a durable cutter bar, a sharp rotary disc and a flexible hydraulic suspension that clears the grass field in no time. And with its low power requirements, youre saving both time and money in fuel costs.
How does it work? The hydraulic suspension lowers the cutter bar on the pasture. Then the rotary disc blades start spinning. As the tractor passes over the pasture, the blades cut through the grass evenly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MINOS-AGRI 2.4M DISC (HAY) MOWER (MIN 60HP)

By using the MU-H/S rear and side mounted mulcher you can turn your tractor into a universal mower for verges, embankments and ditches with working widths of up to 4.00 m.
To do this you only need 2 double acting hydraulic valves on your tractor, one of which should have a floating position.
The patented safety breakaway system of the MU-H/S via a mechanical arm is the active collision protection for both tractor and mulcher.
This allows the mulcher to permanently reduce its load upwards, thus reducing the forces bearing on the lower link and the device.
Features:
Manufactured from High Quality QSt/E Steel with Headstock Cat. II for Rear mounting.
Hydraulic parallelogram side shift.
Patented Safety Mechanical Break Away System.
Working angle 90° up to 60° down.
Gearbox with integrated over run clutch for 540 r.p.m.
Belt protection with tension measuring slot.
Hydraulic transport safety lock at an angle of 90° with shut-off tap, (2 double acting spool valves required, at least one with floating position).
Stand.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights.
Wearing skids.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark Fin spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
P.T.O. shaft and Guarding to ISO Standards.
Carbide Wearing Skids (removable).
Adjustable Vario cutting bar for adjusting the shredding rate.
Options:
Electro-Hydraulic 6/2 distributer with handle and feeler (1 double acting spool valve with floating position required).
Rotor with triple Y-blades (additional charge).
Rotor with M shackle flails (additional charge) (please state exact working width).
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Model:
MU-H/S 140 1400mm 90 HP WW 1400mm Weight 640kg Flails 12
MU-H/S 160 1600mm 90 HP WW 1600mm Weight 670kg Flails 14
MU-H/S 180 1800mm 90 HP WW 1800mm Weight 705kg Flails 16
MU-H/S 200 2000mm 90 HP WW 2000mm Weight 735kg Flails 16
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H/S 160 REAR & SIDE MULTI PURPOSE FLAIL MOWER

CP270 Chisel plough, 50x25 tyne, coil spring, t bold - 9 tynes.
Designed for light (ST) to medium-heavy (STH) or extra heavy (CT, CP) cultivation, row cropping, ploughing, raking and initial working of new country.
Assists in controlling weed growth and surface water penetration.
Tynes can be re-arranged on tool bars and additional tynes can be added to suit any application.
Features:
- 25mm square tynes
- Easy tyne placement/adjustment
- Reversible points (doubling point life)
- Solid steel DURAX frame
- 65mm solid steel double toolbar
- 50x25mm spring steel chisel tynes
- Strong fabricated tyne clamp
Specifications:
- 9 Tynes
- 2.7m Width
- Weight: 490kg
- 60hp power req
- Cat 1/2 linkage
Options:
- Additional tynes
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS 2.7M CHISEL PLOUGH WITH COIL SPRING & T BOLT- 9 TYNE, 60HP - CP270

Galvanised ACS-STS Series Rotary Slasher. Side Throw Model. Available in AHS and ACS series Slashers.
Features:
- 210cm cutting width
- Italian manufactured high ratio gearbox (70HP)
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- Lifting throw blades
- Swing back blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- 8 series European driveshaft with integral 4 plate clutch
- Twin height control wheel
Optional Extras:
- Chain guard front & rear
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM GALVANISED 210CM SIDE DISCHARGE ROTARY SLASHER (70HP) - ACS-STS SERIES

The GH-5004 Aervator is a high utility farm implement that relieves compaction, aerates, cultivates and renovates. It can function as a rotary hoe, a disc, a roller and a harrow and increases the effectiveness of water and fertiliser.
Product Features
Aerate, Renovate & Maintain 00 Neutral Setting
The axle is straight
This is used when the soil structure is very friable.
The tines will usually penetrate their full depth.
This setting is usually used to maintain the soil structure, possibly once a year in a maintenance program.
Aerate & Renovate 2.50 Setting
The axle has 2.5 degrees of angle
This is ideal for your first use of the aervator.
If your ground is hard the tines may not penetrate very far, maybe only 25-50 mm.
Dont worry, this is normal. Aeration is not a quick fix.
Aerate & Renovate 50 Setting
The axle has 5 degrees of angle
Use this setting for subsequent uses of the aervator.
With each pass you should change the direction of travel.
Across then diagonally is ideal.
Cultivate & Renovate 7.50 Setting
The axle has 7.5 degrees of angle
On this setting the aervator starts to get aggressive.
You may require additional weight or ballast to acheive maximum depth.
This setting is best used after previous passes and will fracture any compaction layer.
If used on extremely hard ground the tines will probably not penetrate very far.
Cultivate 100 Setting
The axle has 10 degrees of angle
On this setting the aervator is very aggressive.
Again use weight.
This setting is best used after previous passes and will fracture any compaction layer.
If used on hard ground the tines will probably not penetrate very far.
Equipment Options
Trailing kits for all models
Hard facing tine option
Hydraulic folding wings
Removable concrete weights
Turf tines
Larger models available up to 12m
Aeration requires multiple uses of the aervator to achieve results.
Depending on your soil structure, this could take 12-24 months.
The ideal time to use is autumn and spring depending on your rainfall.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AERVATOR GH SERIES 5M - GH-5004. MIN 110+HP

Muratori Mulcher suitable for tractors up to 80HP with Hammer Blades, counter blade, rear bonnet and rear roller. For grass, pruning's and stubble. "Y" blades also available.
Specifications:
- 40-80 HP
- 14 Hammer Blades (optional 42 "Y" blades available)
- 196cm Overall width
- 180cm Working width
- Hydraulic off-set with 27cm movement
Accessories:
- Manual off-set with crank
- Trailing wheels (2)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN MURATORI 1.8M (40-80HP) MULCHER (INC HYDRAULIC OFFSET) - MT80 180

Mulchers with a broad range of potential uses, ideal for the shredding of pruning residues, vine-cuttings, plant remains, bushes, grass.
Also ideal for the upkeep of roadsides, the maintaining of non-seeded areas, pastures and hunting grounds.
The VKM 210, 240, 280 and 305 series is equipped with mechanical or hydraulic axial side shift and wheels (or roller) with removable bottoms placed behind the rotor, to prevent the flattening of the chopped product.
Specifications:
Tractor Connection: Linkage (Cat II, floating top link)
Connecting position: Rear
Engine speed rpm: 540
Tractor horse power HP: 80-130, KW: 59-96
Cast Hammer Blade: 24
Working Width: 2374mm
Weight: 910kg
Features:
Suggested Use: Grass and green pruning's to 90mm diameter.
Construction: Medium profile body and one mulching bars.
Control: Hydraulic side shift.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced 8 row rotor.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Roller with removable ends (standard fitment).
Options:
- Left hand offset
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 2.4M VKM MULCHER (SUIT 80-130HP)

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 893 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

RAPID PLAS 7,000L CONE BOTTOM TANK ON STAND

AGRIFARM PAINTED 150CM ROTARY SLASHER (125HP) - ACS SERIES

GENTECH 6.8 KVA GENTECH MINE SPEC DIESEL GENERATOR (ELECTRIC START)

AGRIFARM FOREST MULCHER AHM SERIES -160CM (70+HP) - AHM/160-F

AGRIFARM BANANA MULCHER AHM SERIES - 285CM (85+ REQHP) - AHM/285-B

MINOS-AGRI 2.4M DISC (HAY) MOWER (MIN 60HP)

MUTHING MU-H/S 160 REAR & SIDE MULTI PURPOSE FLAIL MOWER

JARRETT IMPLEMENTS 2.7M CHISEL PLOUGH WITH COIL SPRING & T BOLT- 9 TYNE, 60HP - CP270

AGRIFARM GALVANISED 210CM SIDE DISCHARGE ROTARY SLASHER (70HP) - ACS-STS SERIES

AERVATOR GH SERIES 5M - GH-5004. MIN 110+HP

DAKEN MURATORI 1.8M (40-80HP) MULCHER (INC HYDRAULIC OFFSET) - MT80 180

NOBILI 2.4M VKM MULCHER (SUIT 80-130HP)

Farm Supplies Machinery & Equipment

Dealer Address