Farm Supplies Machinery & Equipment

Silvan 600L Linkage Turbomiser (GTM-P55DS) with optional Super Cannon Head (GT55D-1) included

Linkage Turbomiser 600 litre sprayer with a 140L/min centrifugal pump and a 550mm fan.  Ideal for vineyards, orchards and greenhouses.

SILVAN SILVAN - 600L LINKAGE TURBOMISER WITH SUPER CANNON HEAD - GTM-P55DS

Extra Heavy construction to suit liquids with a specific gravity of up to 1.5 sg.
Use this tank to store molasses then feed out to a licker drum.
Special Features:
- Extra heavy wall thickness
- Ideal for heavy liquids up to 1.5sg
- Standard with 80 mm brass outlet and inspection cover
- Fitted with overflow as breather
Dimensions: 4,600 DIA x 3,290 Inlet Height x 3,440 Overall Height
Capacity: 50,000 L
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 50,000L MOLASSES TANK

Linkage air assist Suntuff 500 litre sprayer with a 88 L/min diaphragm pump and 800mm fan.
Ideal for smaller vineyards or orchards and smaller horsepower tractors.
Specifications:
Market: Viticulture. Horticulture
Tank Size(L): 500
Connection Type: Linkage
Min PTO hp: 40
Pump Size (L/min): 88
Height / Width / Length (mm): 1325 / 1190 / 1400
Product Weight (kg): 140
Application: Vineyards and Orchards
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body. APS71: 67L/min. capacity 5000kPa pressure. APS96: 88L/min. capacity 5000kPa pressure.
Fan Size: Axial flow type, fan with curved nylon reinforced blades, galvanised cowling and protective mesh cover. 600mm with 8 blades on 200L unit. 700mm with 8 blades on 400L unit. 800mm with 10 blades on 500L unit
Nozzles: Flip-over type for dilute/concentrate spraying, ceramic jets, stainless steel swirl-plates. 200L unit: 10 single nozzles (5 per side) twist on/off. 400L unit: 12 flip over nozzles (6 per side) twist on/off. 500L unit: 14 flip over nozzles (7 per side) twist on/off.
Gearbox: Single-speed with neutral position, oil-bath type.
Controls: 3 outlet with pressure regulator. 400/500L models standard with extra length hoses - for tractor control mount.
Tank: Polytuff, impact resistant, polyethylene construction with litre calibrations, non-spill screw-down lid.
Frame: Galvanised steel, suit cat I & II linkage (200L cat I linkage only).
Agitation: 200L: bypass, 400L / 500L: dual bypass.
Pressure Gauge: Glycerine filled gauge, located on the control valve.
Filtration: Lid strainer, suction line strainer and stainless steel nozzle filters.
PTO Driveshaft: Quality driveshaft with quick release pins & safety cover.
HP Required: 200/400L: Minimum 20 PTO HP, 500L: Minimum 40 PTO HP.
Fitment Options:
- Two sided deflector (600mm fan size)
- Two sided deflector (700mm fan size)
- Two sided conveyor (700mm / 800mm fan size)
- Two sided deflector (800mm fan size)
- Bottom air deflectors (600mm / 700mm / 800mm fan size)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 500L SUNTUFF LINKAGE SPRAYER - MIN 40PTO HP

Heavier in construction than the Orion, the Scorpio is a high body fixed mulcher, for tractors from 110-140hp. Universal 10mm Y shaped flails ideal straw, grass and scrub mulching.
Specifications:
Actual Width: 340cm
Working Width: 320cm
Required HP: 110-140hp
Weight: 1272kg
No of Blades: 72 Y shaped flails
Features:
100hp Rated gearbox (Scorpio/F200-F250)
140hp Rated gearbox (Super Scorpio/F280-F320)
Integrated over-run clutch
Fixed counter blades
Double skinned chassis
Side skids
4 Belt side transmission (Scorpio /F200-F250)
5 Belt side transmission (Super Scorpio/F280-F320)
2 Position headstock for centre mount or offset (25cm) operation
540rpm PTO (Scorpio/F200-F250)
1000rpm PTO (Super Scorpio/F280-F320)
Front protection flaps
10mm Y shaped flails
Parking support
Options In Lieu of Standard:
Spreading fins (each) (200 = 6, 225 = 6, 250 = 8, 280 = 10, 320 = 12)
Set of rear steering wheels (Scorpio/F200)
Set of rear steering wheels (Scorpio/F225-F250)
Set of rear steering wheels (Super Scorpio/F280-F320)
Rear roller (Scorpio)
Rear roller (Super Scorpio)
Hydraulic door opening (Scorpio)
Hydraulic door opening (Super Scorpio)
Hammer flails in lieu of Y flails (Scorpio)
Hammer flails in lieu of Y flails (Super Scorpio)
Models:
SCORPIO/F 200 200cm Working width 60-100hp 793kg 44 Blades
SCORPIO/F 225 225cm Working width 70-100hp 844kg 48 Blades
SCORPIO/F 250 250cm Working width 75-100hp 915kg 56 Blades
SUPER SCORPIO/F 280 280cm Working width 100-140hp 1183kg 64 Blades
SUPER SCORPIO/F 320 320cm Working width 110-140hp 1272kg 72 Blades
SUPER SCORPIO/F 320DD 320cm Working width 110-180hp 1362kg 72 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.2M (110-140HP) SUPER SCORPIO/F GENERAL PURPOSE MULCHER

The Nobili RM II series mulchers are a robust and versatile machine with a helical blade pattern for a lower power requirement. The RM II is fitted with an opening tailboard, life greased bearings and a mulching bar to produce a fine mulch.
Height control is maintained by adjustable skids.
Features:
Suggested Use: Grass, stubble, pasture topping, vegetable topping, regrowth and green pruning's to 100mm diameter.
Construction: High profile body, opening tailboard and one mulching bar.
Control: Two position fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Category II three point linkage, manually adjustable offset and floating top link.
Height Control: Skids.
Specifications:
Connection Type: Linkage
Tractor HP: 60-130 HP
Blades (Y with Straight): 40/20
Working Width (mm): 1808
Product Weight (kg): 730
Height / Width / Depth (MM): 1325 / 2055 / 800
Options:
Y Blades: 40
Steel Hammer: 20
Full Width Roller
Semi Swivel Wheels
Wear Plate
NOTE: There is a surcharge for machinery assembly and blade changes (Excludes price of blades).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 1.8M RM II MULTI-PURPOSE MULCHER (60-130HP)

The RM80 offset disc cultivating plough is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 26inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 1970kg
No of bearings: 12
No of axles: 6
Cutting width: 2.74m (9ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 26 INCH 6MM SCALLOP DISCS - 0871, SUIT 75-165HP

Nobili TB mulchers are tractor-mounted machines to be fitted to the three-point linkage of the tractor lift, side-shiftable through a parallelogram arm. Conceived for landscape maintenance professionals,
Suitable for shredding grassy areas and for maintenance of roadsides, embankments, hedges, lawns and gardens. Specialized and sturdy, TB mulchers are build with high resistance steel and are supported by roller and skids adjusting the working height.
These mulchers are constructed in compliance with the European regulations.
Specifications:
Tractor Connection: Linkage (Cat II)
Connecting position: Rear
Engine speed rpm: 540
Tractor horse power HP: 30-80, KW: 22-59
Working Width: 1400mm
Overall Width: 1600mm
Weight: 460kg
Features:
Suggested Use: Grass and green pruning's up to 40mm diameter.
Construction: Low profile body & no opening tailboard.
Control: Hydraulic swing arm offset with break away. Inclination adjustment: 45° below horizontal to 90° vertical.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. II three point linkage.
Height Control: Standard roller (standard fitment).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 1.4M TB MULCHER (SUIT 30-80HP)

Bamawm 3 Phase Electric 6" Roller Mill.
The ultimate in low maintenance roller mills. Running two motors and gearboxes, eliminating chain, pulleys, v.belts and exposed gears, therefore eliminating much of the maintenance required in regular roller mills.
Some photos show larger size, however they are the same design (only dimensions change).
Features:
Spring loaded rollers
Heavy duty gearboxes
Heavy duty bearing assembly
Rare earth magnets to help remove metallic objects
Hardened grooved rollers
Heavy duty galvanized frame
No chains, sprockets or v. belts
Optional differential drive using electronic inverter technology
Roller speed can be altered to enhance milling of small grains
These units do not include wiring. Electrician will need to hard wire at your location.
4", 5", and 6" Auger Options:
3m
4m
5m
6m
7m
8m
9m
10m
12m
Custom Design
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BAMAWM 3 PHASE ELECTRIC 6" ROLLER MILL

Suitable for raking and turning spreading hay crops, silage and grain crop stubble. Used as a V or Inline rake.
Construction: Simple robust construction requiring minimal maintenance.
Drive Line: Ground drive.
Fold: Hydraulic fold.
Suspension: Adjustable spring suspension.
Control: Single set hydraulics via tractor remote.
Attachment: Cat. II clevis to tractor drawbar.
Specifications:
Type: Carted V with Splitter Wheel
Working Width (m): 6.4
Product Weight (kg): 850
Number of rake wheels (L/R-Kicker): 5/5 +1
Tynes Per Wheel: 40
Rake wheel diameter: 1400mm
Transport width: 2.6m
Options:
Hydraulic Opening Kit
Note: Hayrakes Delivered Unassembled
* Maximum working width and speeds depend greatly upon product raked, volume and general conditions.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SITREX QR TRAILED HAYRAKES - 5L/5R+1 RAKE WHEELS - SITREX - HR-QR10

Working Width = 1,600 mm (63")
Weight = 700 kg
Min HP = 40 hp
Removing weeds and stones is the first step in creating high-quality natural sports turf or golf surfaces. Debris within the upper soil profile can restrict seed germination and lead to poor grass density.
The Stoneburier creates a clean, uniform tilth to give your project the best possible foundation. This high-quality surface cultivator features a robust rotor with two knife options, cutting trenches to loosen the soil. Screening tines then separate stones and contaminants from the finer soil. Stones are buried deep in the trenches, while the cleaned soil is returned to the surface.
A rear roller levels and consolidates the ground, producing an even base ready for seeding or further preparation.
Developed with input from GKBs contracting division, the Stoneburier is designed for ease of use and reliable performance. The rear roller can be hydraulically adjusted to suit varying ground conditions and can be water-ballasted for effective operation on heavily compacted soils.
Key Features:
- 45° fraising blades (left and right)
- 90° fraising blades (left and right)
- Three-point linkage (Category III)
Optional Extra:
SB00.03.01 - Hydraulic Adjustment Rear Roller (side shift)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GKB MACHINES 1.6M STONE BURIER (40+ HP) SPORTS TURF

The ideal road grading blade for 100 HP tractors.
Features:
Hydraulic angle using the famous Berends patented swivel turntable system.
Hydraulic tilt adjustment.
Manual offset with optional hydraulic adjustment.
Over 6m in length.
Weight approximately 2000kg with provision for water ballast to be added.
Optional linkage hitch available.
Main beam 250 x 250 x 12.5mm rhs.
10mm mouldboard with 500mm clearance with correct curvature for road grading.
Fitted with reversible hardened cutting edge.
Wheelkit consists of 4 Landcruiser wheels with hydraulic lift.
Also Available:
0427 12ft trailing Grader with hyd angle, tilt and wheellift no offset (fixed)
0428 12ft trailing Grader with hyd angle, offset, tilt and wheellift
Options:
0426 Optional Offset ram and hoses
0429 Optional Angle Ram Relief Valve
0420 Boxed ends suit all HD, EHD and Hydraulic model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GRADER BLADES TRAILING MODEL 10FT (3M) - 0425

3 stage forklift. Mounted height at 300 ground clearance.
Burder builds 2 stage and 3 stage mast forklifts. The 2 stage mast is suitable for users with low height requirements. The 3 stage mast is the most common build for forklifts and is suitable for users who require more lift height than the 2 stage mast forklift.
Specifications:
Lift Height: 3600mm
Approx. Mast Height: 2000mm
Capacity: 300kg Min, 2000kg Max (further info in images)
Mast Weight: 700kg
All Burder 1,500kg and 2,000kg CTM forklifts have these standard features:
- Clearview through all Burder 2 stage Forklift mast for easy view
- Tine retainer for easy for adjustment
- Compact tilt mechanism, including quick detach (subframe mounted forklift)
- Lock mechanism to ensure easy removal
- Industrial greasable mast bearings with integral thrust for easy maintenance
- Heavy duty industrial mast section
- Hydraulic quick coupler with frame for easy attachment
Burder Forklifts are fitted for extra cost
Options:
Quick detach sub frame & compact tilt mechanism (CTM)
Super steer sub frame
Side shift requires extra circuit on valve including hoses on mast
Hoses for tractor remotes 2ccts mid or rear
Hoses for tractor remotes 3ccts mid or rear
2 bank valve
3 bank valve ROPS only
4 bank valve ROPS only
Joystick for ROPS
Cables and joystick
3rd function electric
3rd & 4th function electric
1 x extra hose on mast including couplers
2 x extra hose on mast including couplers
Linkage mount including tilt ram
Fixed high back frame
Bolt on high back frame
Tine retainers (Anti Flip-Up)
Hydraulic soft ride (included in 4.2m & 5.2m units)
Hydraulic soft ride electric
Quick detach hooks for subframe
Weight sensor (pressure sensor in lift circuit, screen in cab) - Dinamica generale fork
Couplers on side shift rams & hoses
Anti-drop valves counterbalance style per circuit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 1,500KG, 3.6M LIFT HEIGHT FORKLIFT (3 STAGE)

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 929 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

SILVAN SILVAN - 600L LINKAGE TURBOMISER WITH SUPER CANNON HEAD - GTM-P55DS

POLYMASTER 50,000L MOLASSES TANK

SILVAN 500L SUNTUFF LINKAGE SPRAYER - MIN 40PTO HP

CELLI 3.2M (110-140HP) SUPER SCORPIO/F GENERAL PURPOSE MULCHER

NOBILI 1.8M RM II MULTI-PURPOSE MULCHER (60-130HP)

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 26 INCH 6MM SCALLOP DISCS - 0871, SUIT 75-165HP

NOBILI 1.4M TB MULCHER (SUIT 30-80HP)

BAMAWM 3 PHASE ELECTRIC 6" ROLLER MILL

SITREX QR TRAILED HAYRAKES - 5L/5R+1 RAKE WHEELS - SITREX - HR-QR10

GKB MACHINES 1.6M STONE BURIER (40+ HP) SPORTS TURF

JOHN BERENDS GRADER BLADES TRAILING MODEL 10FT (3M) - 0425

BURDER 1,500KG, 3.6M LIFT HEIGHT FORKLIFT (3 STAGE)

Farm Supplies Machinery & Equipment

Dealer Address