Farm Supplies Machinery & Equipment

Features:
80HP single speed gearbox (540 RPM).
Phased rotors 200mm pitch.
Head stock centre mounted.
Leveling bar standard.
Floating side shields.
1680mm working width.
80 270mm Working depth.
1 3/8in 6 spline PTO with slip clutch.
Phased Rotor Benefits:
Reduces the absorption of power and fuel consumption.
Eliminates vibrations.
Better soil crumbling.
MF80-170CR Specifications (with Cage Roller)
Connection Type: Linkage
Min Tractor PTO HP: 60-80 HP
No. of Blades: 16
Working Width (mm): 1680
Product Weight (kg): 440
Total Width (mm): 1730
MF80-170PR Specifications (with Packer Roller):
Connection Type: Linkage
Min PTO HP: 60-80 HP
No. of Blades: 16
Working Width (mm): 1680
Product Weight (kg): 530
Total Width (mm): 1730
Factory Options:
Stone Collar Protection
Wheel Track Eradicator
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI MEKFARMER 80 POWER HARROWS 1.68M - BREVIGLIERI - MF80-170CR, MIN 60-80HP

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage with 60 -130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1930kg
No of bearings: 8
No of axles: 4
Cutting width: 2.74m (9ft)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

Buck Rake Conus 2 tines Hyd Push off - 3000mm
Specifications:
Width: 3000mm
Capacity (m3): 4.70
Weight: 2000kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER TELEHANDLER BUCK RAKE - CONUS 2 TINES - 3000MM

Overall Dimensions (approx):
- Hopper Capacity: 1920 litres
- Height: 1.755 m
- Length: 2.940 m
- Width (including tyres): 2.430 m
- Weight: 535 kg
- Hopper Opening (Straight): 1.750 m
- Hopper Opening (Diagonal): 2.475 m
Standard Inclusions:
* Stainless steel hopper
* Welded & painted frame
* Galvanised spinner
* Standard discharge spout & gate assembly
* Jockey wheel
* New radial tyres
* PTO (not on hydraulic models)
* Starter Pack (including grease tube & caulking gun)
* Operator manual & quantity charts
* 12 months warranty on structural components
* Suppliers warranties on commercial components

Options:
- 1920L. Holds 2 tonne of Super. With adjustable discharge spout & gate assembly. (Kurrajong 2000 Deluxe - KSD2000)
- 2520L Big Volume Hopper - Holds 2 bulker bag or Urea. (Kurrajong 2000 Standard - KS2000BV)
- 2520L Big Volume Hopper - With adjustable discharge spout & gate assembly. Holds 2 Bulker bag of Urea. (Kurrajong 2000 Deluxe - KSD2000BV)
Optional Extras:
* Agitator & safety screen
* Lump breaker & safety screen
* Quantity booster
* Galvanised frame
* Stainless steel discharge spout
* Electric gate opener (must include s/steel discharge spout)
* Heavy duty tyres
* Road tow kit
* Tarp & bow
* Hydraulic option (no PTO)

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

CRUMP 1,920L KURRAJONG 2000 STANDARD SPREADER

The Grow-Master aerator can turn your tired, life-less soil into productive, high yielding pastures. This versatile implement will aerate, cultivate and renovate your soils.
The specially designed tines shatter the compact ground, increasing the absorption of water and air which in turn encourages root growth. The tines have a slight twist in them which cracks the ground in a sideways and downwards motion. This allows water, air and nutrients to move readily through the soil profile making them more available for plant roots.
The grow-master is fitted with double rollers which are angled in opposite directions. This reduces sideway drag on the tractor when ground engaging. Each roller can be adjusted for various degrees of angle from 2.5 to a maximum of 10 (four positions).
The maximum offset position is the most aggressive and is most often used for cultivation and for over-sowing new pasture seed. Ballast weight added to the frame will ensure that the tines are buried down to the hub.
Horsepower requirement is quite low with a minimum of only 35Hp required for the 2m unit. A tow hook is mounted on the back for dragging pasture harrows. 2 bolt gang adjustable to alter rotor angle.
Large floor plate deck for carrying ballast (weight) 100x100x6mm RHS Perimeter frame. Heavy Duty 2 triple sealed bearings. Double rollers allow machine to be angle for more aggressive cultivation.
Easy adjust mounting stands. Solid 75mm rotor. Roller is fitted with the same 2 heavy duty bearings used on the Berends Rotary Drain digger for over 30 years. The patented Shatter tines are 8 long and have a unique angle providing a much superior finish to conventional straight tines.
Product Specifications
Aerate, Renovate and Maintain 00 Neutral Setting
The axle is straight
This is used when the soil structure is very friable.
The tines will usually penetrate their full depth.
This setting is usually used to maintain the soil structure, possibly once a year in a maintenance program.
Aerate and Renovate 2.5 Setting
The axle has 2.5 degrees of angle
This is ideal for your first use of the aervator.
If your ground is hard the tines may not penetrate very far, maybe only 25-50 mm.
Dont worry, this is normal. Aeration is not a quick fix.
Aerate and Renovate 50 Setting
The axle has 5 degrees of angle
Use this setting for subsequent uses of the aervator.
With each pass you should change the direction of travel.
Across then diagonally is ideal.
Cultivate and Renovate 7.5 Setting
The axle has 7.5 degrees of angle
On this setting the aervator starts to get aggressive.
You may require additional weight or ballast to acheive maximum depth.
This setting is best used after previous passes and will fracture any compaction layer.
If used on extremely hard ground the tines will probably not penetrate very far.
Cultivate 100 Setting
The axle has 10 degrees of angle
On this setting the aervator is very aggressive.
Again use weight.
This setting is best used after previous passes and will fracture any compaction layer.
If used on hard ground the tines will probably not penetrate very far.
Optional
Trailing Wheelkit includes wheels, drawbar and hydraulic lift (0190)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GROWMASTER 4000 AERATORS - FOUR ROTOR - 0187

The Nobili TB mulchers are tractor-mounted machines to be fitted to the three-point linkage of the tractor lift, side-shiftable through a parallelogram arm. Conceived for landscape maintenance professionals,
Suitable for shredding grassy areas and for maintenance of roadsides, embankments, hedges, lawns and gardens. Specialized and sturdy, TB mulchers are build with high resistance steel and are supported by roller and skids adjusting the working height.
These mulchers are constructed in compliance with the European regulations.
Specifications:
Tractor Connection: Linkage (Cat II)
Connecting position: Rear
Engine speed rpm: 540
Tractor horse power HP: 40-80, KW: 29-59
Working Width: 1600mm
Overall Width: 1800mm
Weight: 480kg
Features:
Suggested Use: Grass and green pruning's up to 40mm diameter.
Construction: Low profile body & no opening tailboard.
Control: Hydraulic swing arm offset with break away. Inclination adjustment: 45° below horizontal to 90° vertical.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. II three point linkage.
Height Control: Standard roller (standard fitment).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI 1.6M TB MULCHER (SUIT 40-80HP)

Suitable for ROPS and CAB (optional).
Titan products like Burder products are made with the same principles in mind. The products are built to be tough, efficient and suits even the most budget conscious.
Specifications (refer to images to see A, B, C, D & E):
Front Tyre Max: 8.3x16
Volume: 0.22m³
Tractor HP: 20-35
Bucket Width: 1.35m
Rated Capacity (std Bkt): 550kg
A. Lift Height to Pin: 2380mm
B. Dump Height: 1775mm
C. Dig Depth: 100mm
D. Crowd Angle Ground Level: 36° Max Crowd Angle: 61°
E. Dump Angle: 48°
FEL Weight Incl Std Bucket: 300kg
Features:
Mechanical Self Level
2 Bank Valve and Joystick Control (cable for CAB Tractors)
Adjustable Level Indicator
Quick Detach Loader
Gravel Bucket
Rams Horns Bump guard (Option for Full Mesh Grill Guard in Lieu of Rams Horns)
Choice of Titan 2 Pin Euro, or Titan "Burder" Quick Change at no Extra Cost
Plated Greasable Pins
Australian Made
2 Pack Epoxy Paint
Tractor Colour or Charcoal Paint Scheme
12 Month Limited Warranty
Options:
2 circuit remote (ROPS and CAB)
Electric front remote (1 circuit)
Hydraulic quick coupler (4 port dump line single QRC)
Full Mesh Grill Guard in Lieu of Rams Horns
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 3400 - 1.35M TITAN FRONT END LOADER (SUITS 20-35HP)

3M Heavy duty leaf spring ripper for primary cultivation, winter crop cultivation and increased soil drainage. Fixed and hydraulic folding models available.
Features:
Double clamp bolt-on-legs (R9-R13)
Welded leg brackets (R15-R21)
Adjustable leaf spring
Heavy duty 100 x 100mm box section
Adjustable rubber depth wheels
865kg breakout
Reversible chisel point
Rubber depth wheels
Solid steel legs
Models:
R9-3 3m Fixed Frame (125-200hp)
R11-3 3m Fixed Frame (125-200hp)
R13-3.5 3.5m Fixed Frame (125-200hp)
Options:
Rubber depth wheels ( 2 x 600-9)
Wing share (each)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FARMGARD 3M, 11 RIPPERS (125-200HP) FIXED FRAME HEAVY DUTY RIPPER

Description - Abbey Muck Side Spreaders 6.8m3 AB2090
Simple, robust chain and flail side spreader for small farmers. Easy to use, low maintenance.
Specifications
Heaped Capacity: 6.8m³
Length: 5.18m
Width: 2.29m
Height: 2.26m
Features
Side discharge.
Hydraulic opening side door.
Starter flails.
400 R 22.5 tyres.
LED lights.
Hydraulic brakes.
Wide angle driveshaft.
Winding jack stand.
6 inch rear outlet.
Prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ABBEY 6.8M3 MUCK SIDE SPREADERS AB2090

The rotary rake model RR 320 mounts single pivoting wheels.
Equipped with the frame, central shock absorber and reinforced raking arms.
Single rotary rake, with adjustable working height, tandem rocker ground wheels (4 wheels), and articulated Frame.
9 Raking arms, requires low horsepower
Three point linkage mounting, comes with PTO shaft.
Enorossi single rotary rakes are professional machines that guarantee maximum productivity in any kind of ground.
Thanks to the perfect adaptation to the ground and the soft harvesting work, they preserve the quality of the product.
Features:
- Three-point linkage (3PL)
- 350cm working width
- x1 rotor
- Oil bath rotor transmission
- 9 tine arms per rotor
- 44 double tines
- Mechanical working depth control
- 400kg machine weight
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ENOROSSI SINGLE ROTARY RAKE 3.5M

Made in Europe
Features:
- Self-loading design, simply scoop and mix
- Hydraulic opening at bottom with unloading pipe
- Safety grill with built-in bag breaker
- Incredible European build quality
- Includes electric control kit, hoses and couplings
- Centre Discharge
Dimensions:
Width = 1,260 mm
Flow Range = 25-40 LPM
Full Capacity = 200 L
Full Weight = 750 kg
Empty Weight = 270 kg
Larger capacities also available - 250L, 350L 450L & 600L. See picture/s for confirmation of those versions.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH CONCRETE MIXER BUCKET (200L)

The RM80 offset disc cultivating plough is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 26inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2510kg
No of bearings: 16
No of axles: 8
Cutting width: 3.66m (12ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 26 INCH 6MM SCALLOP DISCS - 0873, SUIT 75-165HP

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 893 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

BREVIGLIERI MEKFARMER 80 POWER HARROWS 1.68M - BREVIGLIERI - MF80-170CR, MIN 60-80HP

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

BURDER TELEHANDLER BUCK RAKE - CONUS 2 TINES - 3000MM

CRUMP 1,920L KURRAJONG 2000 STANDARD SPREADER

JOHN BERENDS GROWMASTER 4000 AERATORS - FOUR ROTOR - 0187

NOBILI 1.6M TB MULCHER (SUIT 40-80HP)

BURDER 3400 - 1.35M TITAN FRONT END LOADER (SUITS 20-35HP)

FARMGARD 3M, 11 RIPPERS (125-200HP) FIXED FRAME HEAVY DUTY RIPPER

ABBEY 6.8M3 MUCK SIDE SPREADERS AB2090

ENOROSSI SINGLE ROTARY RAKE 3.5M

HIMAC EURO HITCH CONCRETE MIXER BUCKET (200L)

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 26 INCH 6MM SCALLOP DISCS - 0873, SUIT 75-165HP

Farm Supplies Machinery & Equipment

Dealer Address