Farm Supplies Machinery & Equipment

Ideal for primary and secondary tillage for 60 - 130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1725kg
No of bearings: 8
No of axles: 4
Cutting width: 2.5m (8ft 3inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 22 PLATE 6MM DISCS - 0845, SUIT 60-130HP

Heavy duty hydraulic side shift mulcher, for tractors from 75-90hp. Ideal for mowing grass and mulching pruning's up to 70mm in diameter (Vineyards and Orchards etc).
Specifications:
Actual Width: 268cm
Working Width: 250cm
Required HP: 75-90hp
Weight: 725kg
No of Blades: 22
Features:
90hp Rated gearbox
Integrated over-run clutch
2 Internal counter combs
Double skinned chassis
Adjustable rear roller for cutting height
Side skids
4 Belt side transmission
Hydraulic side shift
540rpm PTO
Front protection flaps
Flat hammer flails
Parking support
Options In lieu of standard:
Rear collection spikes (each) (150 = 11, 175 = 13, 200 = 15, 225 = 17, 250 = 19)
Set of steering wheels in lieu of roller
Manual offset by threaded bar (in lieu of hydraulic)
Y flails in lieu of hammer flails
Models:
MIZAR/S150 150cm Working Width 50-90hp 530kg 14 Blades
MIZAR/S175 175cm Working Width 60-90hp 585kg 16 Blades
MIZAR/S200 200cm Working Width 65-90hp 635kg 18 Blades
MIZAR/S225 225cm Working Width 70-90hp 685kg 20 Blades
MIZAR/S250 250cm Working Width 75-90hp 735kg 22 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.5M (90HP GEARBOX) MIZAR/S LOW BODY MULCHER

Experience the full power of the STOLL ProfiLine Next Generation. The amazing best values in all areas ensure the highest quality in lifting capacity and lifting height, stability and loading speed. In addition to this, the individually selectable accessories from the ProfiLine Next Generation fit in perfectly with your needs as a farmer or contractor. True professionals for professionals.
German engineering is known all around the world for its high quality, performance and reliability. That is why we develop all STOLL front loaders with precisely these values in Germany. They combine state-of-the-art technology with innovative solutions and this is exactly what we expect from high-quality German products.
All Stoll FZ Loaders include Premium Internal Self Level System, 3rd Function and Manual Soft Ride, Single Lever Joystick, 2 Bank Valve and tractor hydraulics, Rams Horns Bump Guard and Subframe kit.
FZ8 Specifications:
Oil Flow: 36 - 20
HP Range: 50 - 90
Buckets That Suit This Loader:
1.9 Heavy Duty Gravel Bucket
1.8 - 8000 Heavy Duty 4 in 1 Bucket
Loader Options:
- 4th function
- Hydro fix - attachments per circuit
- Hydro fix - attachment side only
- Electric comfort drive upgrade
- Return to level
- Plus function
- Colour code sticker set
- Hydraulic quick change
- Full mesh grille guard
Control Options:
- Hoses to mid remotes
- Double rear diverter upgrade
- Tap and tee manual
- Pro control joystick system upgrade
Further Information on this Loader:
Full Power - Maximum Stable Construction:
- The ProfiLine FZ front loaders are made of fine grain steel - Advantage: Highest stability with maximum torsional rigidity at the same time.
- The lifting arm boom is bent from a single piece of steel - The control rods are installed inside the beam. All the hydraulic lines are well protected but can be freely accessed under the beam.
- Kinematics of the entire swing arm body adapted to modern tractors. This results in optimum positioning of the swing arm to relieve the front axle and the best possible clearance for steering angle and axle swing path.
- In order to avoid the need to regularly replace the hose lines by the lifting arms in accordance with DIN 20066, we use wear-free steel hydraulic pipes instead.
Stoll Attachment Components - Less Load on the Tractor and a greater accurate fit:
- The attachment components can be installed perfectly on all common tractors that is why the designers at STOLL individually adapt every tractor model.
- Reduced load on the front axle thanks to the optimal positioning of the attachment components close to the drivers cab. This shifts the centre of gravity of the entire front loader to the centre of gravity of the tractor.
- Often the windscreen can only be opened together with a STOLL attachment component.
- The attachment components fit perfectly as they are individually adapted to each tractor.
Z-Kinematics - Best view and high performance:
- The rods of the mechanical parallel guide are located in the lifting arm booms - the basis of the Z-kinematics.
- This frees up the view for the driver. No parts above the lifting arms obstruct or are in the way. Another benefit: The front loader can also be mounted closer to the drivers cab - result: Reducing the load on the tractor by optimally positioning the attachment components.
- Front loaders with Z-kinematics have even greater lift capacities and breakout forces. There is no loss of lifting power.
Convincing benefits for you:
- The various front loader models fit perfectly on tractors from 50 to over 300 hp.
- Best quality fine-grained steel for a front loader with high torsional rigidity and stability.
- The extremely high values for the lifting capacity and height are impressive.
- Z-kinematics and the optimally positioned cross tube provide the driver with the best view of the implement.
- For maintenance work, all you need is a commercially available spanner to get to the lines.
- Best equipment for optional features so you can work with even greater efficiency:
- Return-to-level, rapid emptying and re-scooping.
- Re-scooping series.
- Depending on the loader model, quick release frames are available for other coupling systems STOLL offers full flexibility.
So much more information included in the pictures!
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER STOLL FZ8 FRONT END LOADER (50 - 90 HP) (20 - 36 LPM)

Consuming 100,000 tons of high quality Swedish steel annually, UNIA is the largest manufacturer of agricultural machines in Poland with nearly 25,000 machines sold per year, of which over 10,000 are exported to 60 countries around the world, including right here in Australia.
Designed for pre-sowing and stubble tillage
Based on 2 rows of discs that provide easy cutting of the soil intense mixing any plant residues with hay. Can operate as seedbed combination unit due to the possibility of extending it of a carriage with draw-bar for the semi-mounted version. High area performance at low fuel consumption and low wearing rate.
Possibility of extension to the semi-mounted or Drive versions (on the tyre and transport roller, ø670 mm)
Features
Weight With Roller: 1,875 KG
Power Demand: 120-140 HP
No. Of Discs: 28
Suspension axle: 70-825/36 mm
2 rows of 560/4 mm Classic toothed discs, protected by 35x190mm or 42×160 mm shock absorbers (version 4H)
Maintenance-free hub with triple lip seals
600 mm pipe roller
Mechanical / Hydraulic adjustment of working depth
Row of spring levelling fingers
Rigid frame (versions 34)
Hydraulically folded frame (versions H 4 H 7.5)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

UNIA ARES XL 3.5M CUT SPEED DISC CULTIVATOR - UNIA - ARESXL35, 120-140HP

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles. Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1575kg
No of bearings: 6
No of axles: 2
Cutting width: 2.06m (6ft 9inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 18 PLATE 5MM DISCS - 0830, SUIT 60-130HP

Designed for extremely tough conditions and is one of the strongest linkage disc ploughs available. Heavy weighted gangs provide excellent digging ability.
Features:
Each machine takes approximately 2-3HP per disc to pull, depending on conditions.
Prong scrapers are also available for heavy clay soil.
Twin spring loaded pressure screws prevent damage in rocky or undulating conditions.
Easy gang angle adjustment.
Fitted with hard wearing European Bellota Boron discs at 9 inch spacing. Available in 22x5mm(or optional 24x5mm sizes).
Cat 1 & 2 linkage.
28mm square high tensile axles.
Greaseable flanged disc bearings with excellent sealing to exclude contaminants.
Solid cast spools, individually machined, provide all the weight in the gangs rather than in the frame (which can add load onto the bearings.
Specifications:
Disc Size 22inch dia, 5mm thick, Scallop Disc
Approx Weight- 940kg
No. Bearings
No. Axles 4
Cutting Width 2.74m(9ft)
Options:
0950 Optional Scrapers suit 24 plate GM40.
0953 Optional Furrow filler (not sold separately).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GM40 24 PLATE HEAVY DUTY OFFSET DISCS - 0813,2-3HP PER DISC

RZ Range RLC Leaf Spring Rippers 3m R9-3
Heavy duty leaf spring ripper for primary cultivation, winter crop cultivation and increased soil drainage. Fixed and hydraulic folding models available. This is the Fixed Frame version.
Specifications
Working Width: 300cm
Required HP: 125-200hp
Rippers: 9
Fixed Frame.
Features
Double clamp bolt-on legs.
Adjustable leaf spring.
Heavy duty 100x100mm box section.
Adjustable rubber depth wheels.
865kg breakout.
Reversible chisel point.
Solid steel legs.
Options
Rear rollers.
Rubber depth wheels (2×600-9)
Wing share.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RLC 3M FIXED FRAMED LEAF SPRING RIPPERS (11 RIPPERS)

Ideal for spot spraying - and for fitting to utilities, UTV, trucks and trailers sizes include 300, 400 and 600 (this sprayer) Litre tank capacities.
Available with remote control hose reels and a range of engine driven Silvan diaphragm pumps.
(Please note in field image is of the single reel only)
Specifications:
Tank Size (L): 600
Pump Size (L/min): 38
Max Pressure: 40 Bar / 580 psi
Product Weight (kg): 275
Height / Width / Length (mm): 750 / 1850 / 1200
Features:
- available in 300L, 400L (baffled) and 600L; fitted to galvanised skid
- Australian made remote control hose reel
- Honda engine and comet APS41 pump
- 38 L/min (open flow) 40 Bar / 580 psi max pressure
- 100m smoothline hose and turbo 400 spray gun
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 600L REMOTE CONTROL SKID SPRAYER (TWIN REEL)

5 leg Subsoiler with tines & discs up to 450mm working depth. Made in new Zealand.
304 Auto Reset Panerazers are the ultimate sub soiling machine. Especially when the soils to be aerated are heavy & full of obstructions.
Being auto reset makes your sub soiling job seamless as the legs simply lift over any obstruction & immediately reset automatically so you can continue aerating your soils without stopping. Leaf spring reset has a great advantage over rams, not only do they require less maintenance, but the legs are at the highest point of resistance while in the ground & resistance reduces as they lift.
This ensures the legs do not tip falsely but ensures they do clear obstructions when struck.
Rata Panerazer legs are in a 'V' formation. This reduces drag between the legs making it easier to pull and uses less fuel. V formation also means the legs leave the ground independently at the headlands which eliminates 'heaving'.
They feature a heavy duty build RHS main frame construction with reinforcing to cope with hard conditions. The wear protected legs are also securely bolted into the reset mounts.
Working depth is easily controlled via the rear roller setting and tractor 3 point linkage. The rear roller is secured to the main aerator frame with heavy machine pins.
The rear roller is securely mounted into a sealed bearing to ensure smooth operation with minimal wear. The roller is also kept clean by a scraper mounted just behind it.
An innovative modular leg, foot & point assembly provides maximum flexibility of parts. Cast point provides extra wear protection in the form of bevelled hard wearing plate.
Winged feet are an option on the Rata Panerazer range (see photos attached). These provide extra ground lift when sub soiling to create greater subsoil disturbance.
The auto reset system is powered by heavy duty leaf springs mounted on each leg. Leaf springs reset immediately after tripping & clearing the obstacle unlike other reset systems such as hydraulic. This tension is easily adjusted via the 'tension bolt' mounted on the leg. This enables the operator to adjust the tension to the ideal level required for the ground they're operating in. The tension adjustment spanner is included with the implement.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 5 LEG (AUTO RESET) SUBSOIL CULTIVATOR (120HP RECOMMENDED)

XHD Series Slashers. 1.8m, min 50HP.
Features:
150 HP 540 rpm high-speed gearbox
Multi-plate, asbestos free, brass impregnated friction clutch
Heavy duty monocoque pressed 6mm deck plate
Clean body lines to minimise grass build up
Hot dipped galvanised deck
Pivoting headstock with chain backstays
Adjustable height, high clearance skids
Heavy duty spring steel blade carrier
Heavy duty swing back lift blades
Front and rear chain guards
Adjustable height castor wheels
Painted components finished in high quality durable two pack polyurethane
Painted components available in red or green.
Specifications:
Working width: 1.8m (6')
Weight: 700kg
HP: 50
Finish: Galvanised deck
Options:
4 Blade
Offset 200 mm to the right
Sign Rack
Tool Box
Support Legs
Hydraulic Fan
Rear Lights
Extra Wheel kit for XHD-72
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP XHD SERIES SLASHERS 1.8M - MIN 50HP

GM30-900 Heavy Duty 3 Rotor Slasher
Gearbox Rating 150hp
3m (10ft) Working Width
75hp (min) Tractor HP required
Features:
Gear drive rear discharge slasher
Cat I and II
Adjustable skids
PTO drive shaft
Multi plate asbestos free brass impregnated friction clutch
Heavy duty monocoque pressed 6mm deck plate
Clean body lines to minimise grass build up
Pivoting headstock with chain backstays
Adjustable height high clearance skids
Extra heavy duty spring steel laminated blade carrier
Heavy duty swing back heat treated lift blades
Front and rear chain guards
Twin heavy duty adjustable height rear castor wheels
Galvanised deck standard
Painted components available in red or green.
Other colours available on request
Model:
GM30-900 Gearbox Rating 150hp 3m (10ft) Working Width 75hp (min)
Options:
- Mulching Option standard blade carrier double stacked fitted with 2 stepped and 2 straight blades per rotor
- 1,000 RPM upgrade
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP GM SERIES 3 ROTOR SLASHERS 3M, 150HP GEARBOX

Series 39 Hydraulic folding wing frame with 5 section folding S04 Diamond Harrow. 4.83m coverage. Transport width: 3.4m.
Please note that 3 point linkage pins are not supplied.
Murray Series 39 Hydraulic Folding Harrow Frames provide a solution to the transportation of multiple Harrow sections.
Designed to fit Category I or II three-point linkage systems, Murray Series 39 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and hydraulic folded wings.
Murray Series 39 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Series 39 Folding Harrow Frames are supplied complete with centre section, wing attachments and all rings and links to suit your harrow type and size.
Specifications:
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 4.83M HYDRAULIC FOLDING FRAME DIAMOND HARROW

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 893 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM75 HD TRAILING OFFSET 22 PLATE 6MM DISCS - 0845, SUIT 60-130HP

CELLI 2.5M (90HP GEARBOX) MIZAR/S LOW BODY MULCHER

BURDER STOLL FZ8 FRONT END LOADER (50 - 90 HP) (20 - 36 LPM)

UNIA ARES XL 3.5M CUT SPEED DISC CULTIVATOR - UNIA - ARESXL35, 120-140HP

JOHN BERENDS RM75 HD TRAILING OFFSET 18 PLATE 5MM DISCS - 0830, SUIT 60-130HP

JOHN BERENDS GM40 24 PLATE HEAVY DUTY OFFSET DISCS - 0813,2-3HP PER DISC

RLC 3M FIXED FRAMED LEAF SPRING RIPPERS (11 RIPPERS)

SILVAN 600L REMOTE CONTROL SKID SPRAYER (TWIN REEL)

RATA 5 LEG (AUTO RESET) SUBSOIL CULTIVATOR (120HP RECOMMENDED)

FIELDQUIP XHD SERIES SLASHERS 1.8M - MIN 50HP

FIELDQUIP GM SERIES 3 ROTOR SLASHERS 3M, 150HP GEARBOX

MURRAY 4.83M HYDRAULIC FOLDING FRAME DIAMOND HARROW

Farm Supplies Machinery & Equipment

Dealer Address