Farm Supplies Machinery & Equipment

7 leg Subsoiler with tines & discs up to 450mm working depth. Made in new Zealand.
Rata Panerazer subsoilers are designed specifically for use in ground where compaction has occurred. All Rata subsoil aeration equipment features a double bar V frame construction for a better job and easier pulling.
Check out the video to see them in operation and the finish after use.
Rata Panerazer legs are in a 'V' formation. This reduces drag between the legs making it easier to pull and uses less fuel. V formation also means the legs leave the ground independently at the headlands which eliminates 'heaving'.
They feature a heavy duty build with 16mm wear protected legs securely bolted into mounts that are completely welded and gusseted onto the heavy RHS mainframe for strength.
Working depth is easily controlled via the rear roller setting and tractor 3 point linkage. The rear roller is secured to the main aerator frame with heavy machine pins.
The rear roller is securely mounted into a sealed bearing to ensure smooth operation with minimal wear. The roller is also kept clean by a scraper mounted just behind it.
An innovative modular leg, foot & point assembly provides maximum flexibility of parts. Cast point provides extra wear protection in the form of bevelled hard wearing plate.
Winged feet are an option on the Rata Panerazer range (see photos attached). These provide extra ground lift when sub soiling to create greater subsoil disturbance.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 7 TINE/DISC SUBSOIL CULTIVATOR (150HP RECOMMENDED)

The ultimate weapon when it comes to efficiently maintaining your lifestyle block. Pre-cutting is not necessary as branches simply flow through the large inlet chute. The momentum within the cantilevered cutting disk creates a strong draft to discharge high onto a stock pile or trailer.
The Hansa C7 easily mulches prunings, dropped branches, palm fronds, leaves, bark, paper, cardboard, hay, dried manure and kitchen waste.
Features:
Honda GX200 4 stroke petrol engine
Easy start
Heavy duty blades
Pneumatic wheels for easy manoeuvring by hand or by road in a trailer, ute or 4WD
Solid-steel casing
Twin belt drive
Adjustable output chute
Similar noise output to a domestic mower
Minimal cleaning and maintenance required for this garden shredder, mulcher & chipper.
Available in a standard or towbar version
On registration engine four years, chipper two years domestic warranty
Technical Specifications:
Max. chipping capacity: 70mm
Engine: Honda GX200
Max Power: 6.5HP
Fuel tank size: 3.6L
Starting system: Recoil
Inlet chute size: 130 x 150mm
Qty of knives: 2
Knife size: 110 x 42 x 9mm
Knife material: A8 modified tool steel
Cutting disk dimensions: 400 x 10mm
Cutting disk weight: 12.5kg
Cutting disk speed: 2850RPM
Beltdrive: Twin
Self-feeding: Yes
Wheels: 270mm pneumatic
Dimensions: L900 x W650 x H1200mm
Weight: 93kg
Outlet chute height: 780mm
Outlet chute type: Deflector
Optional Add-Ons and Spare Parts:
C7 Towbar Tongue
C7 Towbar Coupling
C7 Bumper
C7 Blades
C7 Anvil
C7 Belts
C7 Cover
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

HANSA C7 CHIPPER 70MM CHIPPING CAPACITY

Designed to spread Causmag (Magnesium Oxide), Urea, Grass Seed and various other types of Fertiliser.
The unique drive system ensures trouble free and reliable operation. Whilst the extra wide wheel base ensures operator safety and stability, particularly on hillsides.
Capacity (120L) or (80kg)
Max Spread Width (3m Mag) or (12m Urea)
Dry Weight (83kg)
Overall Width (1,500mm)
Loading Height (1,090mm)
Optional - Mudguards (see pictures)
Vogal Spreadmax 120 hoppers are made from thick heavy duty UV resistant plastic to cope with the harsh extremes in the Australian & New Zealand environments plus braced with solid galvanised steel side arms.
Features six fins on the spreading disc to ensure optimal spreading of both powdered products such as Causmag and Lime flour along with standard pellet fertilisers.
Dual triangular apertures enable the even spreading of a vast array of fertilisers and also grass seeds.
Featuring a removable agitator that's secured onto the drive shaft via a linch pin. The purpose is to provide an easy way of removing the agitator to enable easy cleaning of the spreaders hopper base.
Including a heavy duty galvanised frame with extensive gusseting and bracing. The drive shaft is supported at the wheel with a high quality greaseable bearing for long life and smooth operation.
This spreader has a heavy duty galvanised steel tow coupling to ensure it has sufficient strength and durability to pull heavy loads in harsh conditions.
The simple and easy to use Pin Lock drive system allows the operator simply moves the slider to the left or right to engage or disengage. The linch pin holds the slider in place.
Vogal spreaders feature gearbox protection - stainless steel plates are bolted over the top and around the spinner shaft. Between the plates and gear box is an oil soaked felt washer to prevent fertiliser dust getting in the gearbox
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 120L FERTILIZER & MAG SPREADER

The Daken Recoil Tape Gate Kit comes with Gate Handle, Gate anchor, 40mm hot tape in a re-coiler and securing insulator.
Suitable for gate ways up to 5 meters. Simple to use and install.
Use 1 or more on a gate way depending on the stock you are wishing to control.
- Very good visibility
- Re-coiled when not in use
- All in one kit
- Easy to install
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN RECOIL TAPE GATE KIT - 76040D

The NR 2100 is our largest fence demolition product, designed for rapid removal of old fences. With a 2,100mm capacity, this roller can wind up the entire fence, star posts and all.
Simply pull the posts and lay the fence down, then start at one end with the roller. Easily capable of handling old mixed design fences, a mixture of netting, barb, plain, and hinged joint can all be rolled up in the one go.
Key Design Features:
- Double pick-up arms to automatically start the roll. They are gravity operated so retract automatically once the wrap starts around the central drum.
- Chain driven American hydraulics with protected motor.
- Rust resistant electroplated catch system that operates automatically when tipping the roller to unload or via a pull cable system.
- Mounting plates custom built to suit your tractor or loader of choice.
- Wire capacity will vary widely depending on the type of fence you are pulling down.
* Please note that the NR2100 is an order-only item as each mounting system needs to be custom designed to fit your machinery.

** Also note that the listed price does not include the cost of the mounting plate and fitting.
Nominal shipping weight 590kg, will vary according to chosen mounting plate.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WALTERS FENCING NR2100 NETTING ROLLER

Trailed air assist 4,000 litre G2E sprayer with 161 L/min diaphragm pump, electric controls, a Glideflex axle upgrade, wide angle shaft and Powerhead conveyor with 920mm fan. Ideal for orchards with trees up to 5 metres high.
Specifications:
Market: Horticulture
Tank Size (L): 4000
Connection Type: Trailed
Min PTO hp: 80
Pump Size (L/min): 161
Height / Width / Length (mm): 2020 / 1880 / 5300
Product Weight (kg): 1,220 (dry)
Application: Orchards
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast aluminium body with brass heads & manifolds. IDS1701:161L/min. capacity, 5000kPa pressure.
Fan Size: 920mm or 1000mm axial flow type, 10 bladed fan with curved nylon reinforced blades, centrifugal clutch for soft engagement / disengagement and protective mesh cover.
Nozzles: 24 flip-over nozzle bodies for dilute/concentrate spraying with on/off. 12 Ceramic hollow cone nozzles per side and 12 ceramic jets with stainless steel swirl plates per side. (16 per side with the Radak conveyor).
Gearbox: Oil-bath type, 2-speed with neutral position
Controls: 40 Bar electric section valves with master valve, electric pressure regulator and in cab controls.
Main Tank: Polytuff impact resistant polyethylene construction with calibrated sight line. 50mm Camlock top & bottom fill.
Hand Wash Tank: 15L polytuff tank filled through cap. Located next to bottom fill.
Chemical Induction: Venturi suction probe.
Frame: Galvanised steel, heavy duty stand & adjustable drawbar.
Agitation: Pump bypass plus venturi agitator
Pressure gauge: Glycerine filled gauge located on valve bank.
Filtration: Suction line filter, pressure filter, nozzle cap strainers.
Wheel Equipment: Glideflex axle fitted with 13.0/65 - 18" implement tyres (speed rating 30 km/h)
PTO Driveshaft: Quality Bondioli & Pavesi constant velocity driveshaft with quick release pins & safety cover.
HP Required: Min 80PTO HP (920mm fan), minimum 90 PTO HP (1000mm fan).
Options:
- Hydraulic kit for Radak Conveyor (top wings) (D99-155B)
- SCRAM Jet (to suit Radak conveyor) (D99-180)
- AVO Jet (to suit Radak conveyor) (D99-187)
- Leaf guard (to suit Powerhead & Radak) (D99-176)
- Double spray lines (Powerhead - includes upgrade to 1000mm fan) (D99-189)
- Double spray lines (Radak) (D99-190)
- Bravo 180S automatic rate controller (D99-143)
- Tandem suspension axle with 11.5/80 - 15.3 tyres (D99-78)
- BKT flotation tyres - 558-400/55 - 22.5 (in lieu of singles) (D99-79)
- IDS2001 pump,182L/min. capacity, 5000kPa pressure (D99-148)
- IDS2600 pump,249L/min. capacity, 5000kPa pressure (D99-149)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 4,000L G2E SUPAFLO TRAILED SPRAYER WITH POWERHEAD FAN - MIN 80PTO HP

- Fully tested polyethylene tank designed to withstand ground and water pressure at depth
- Engineered by geotechnical experts including finite element analysis (FEA)
- Certified to AS/NZS 4766 Rainwater tank standard
- Certified to AS/NZS 1546
- Sealed locking tamper-proof lid
Dimensions : 2,470 L x 1,640 W x 1,665 H
Capacity : 3,300 L
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 3,300L UNDERGROUND TANK (ONLY)

3.25m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3405 - 3.25m (10ft 8in) - 2/9 Tine, 2/12 Tine - 58kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 3 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

A Smooth Rust Resistant Capping.
Looking for a smooth finish for your RHS? Our square post caps will stop water getting in and corroding your RHS posts.
Our post caps stop water and spiders from getting into your posts. Just put them on top of your post and hammer them on with a rubber mallet. Its that simple.
Each galvabond square post cap is made from mild steel to ensure a long lasting and strong cap.
Each cap has little ridges on the inside, which means once the cap is on, it wont come off.
What is A Galvabond Finish?
Wondering what a galvabond finish is? What's the difference between a galvanised cap versus a galvabond cap?
A galvanised product, is when the product is made then hot dipped galvanised.
A galvabond cap is created when we get a pre-galvanised sheet and punch the cap out. This creates a lot smoother finish, yet still remains corrosion resistant.
Price quoted is for one item only.
Discounts apply for bulk purchases of 5+
Specifications:
- 150mm square
- Galvabond
Features:
- Smooth finish
- Won't come off
- Rust resistant
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL 150MM SQUARE POST CAP - PC150

Specifications are shown in images.
Features:
- Carrying capacity from 1.5 to 8 Tonnes
- Versatile and flexible
- Suitable for Steel and rubber tracks as well as pneumatic tyres
- Highest grade alloy
- Multiple safety features
Auger Torque Aluminium Ramps with capacity ranging from 1.5 to 8 tonnes.
With carrying capacities ranging from 1.5 to 8 tonnes, our ramps are over-engineered to ensure they can safely accept steel and rubber tracks as well as pneumatic tyres. This means you no longer need to have individual ramps to cope with various means of traction.
We use only the highest-grade alloy and unlike other companies we dont skimp on quality, so when other ramps start to wear out, ours will still be going strong.
All our ramps incorporate a design feature that prevents bottoming out when loading or unloading and all ramps are supplied with forged locking pins to ensure safe and secure attachment to the loading plate.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE 5 TONNE (3.5M) ALUMINIUM RAMP

The Silvan Volumex range uses a patented design to accurately distribute granulated fertiliser, insecticides, herbicides and seeds.
The volumetric conveyor belt and calibrated metering adjustments ensure the product is applied at correct doses.
Each Volumex distributor permits fitment of two dropper hoses which direct the measured product exactly where it is required.
Features:
- The hopper is constructed from stainless steel and the distributor from non-corrosive polypropylene.
- Precision calibrated manual adjustment dial.
- Compact size allows easy attachment to many types of equipment.
Specifications:
Capacity = 180 L
Distributors / Outlets = 3 / 6
NOTE Mounting brackets and hoses not supplied with the Volumex.
NOTE 12 Volt drive motor is not supplied with Volumex Applicator. If required, please select from Option Listed below.
12V Motor Options:
- 12v Single Speed or Vari Speed Motor.
- MV-SS Micro Single Speed.
- MV-VS Micro Vari-Speed 3-20rpm.
- MV-VS2 Micro Vari-Speed 3-35rpm.
Dimensions:
Length: 735 mm
Width: 510 mm
Height: 730 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 180L VOLUMEX GRANULAR APPLICATOR (3-6 DROPPERS) 12V MOTOR NOT INCLUDED

Flexible PVC reinforced spray hose. Selecta hose is manufactured from the highest quality materials and has been rigorously tested for performance and durability.
Maximum working pressure 2067 kpa (300psi)
10mm ID Hose
100m Hose Length
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 100M (10MM) AG DELIVERY HOSE - SILVAN

Find Farm Machinery For Sale. Browse 7663 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

RATA 7 TINE/DISC SUBSOIL CULTIVATOR (150HP RECOMMENDED)

HANSA C7 CHIPPER 70MM CHIPPING CAPACITY

RATA 120L FERTILIZER & MAG SPREADER

DAKEN RECOIL TAPE GATE KIT - 76040D

WALTERS FENCING NR2100 NETTING ROLLER

SILVAN 4,000L G2E SUPAFLO TRAILED SPRAYER WITH POWERHEAD FAN - MIN 80PTO HP

POLYMASTER 3,300L UNDERGROUND TANK (ONLY)

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 3 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

ROTECH RURAL 150MM SQUARE POST CAP - PC150

AUGER TORQUE 5 TONNE (3.5M) ALUMINIUM RAMP

SILVAN 180L VOLUMEX GRANULAR APPLICATOR (3-6 DROPPERS) 12V MOTOR NOT INCLUDED

SILVAN 100M (10MM) AG DELIVERY HOSE - SILVAN

Farm Supplies Machinery & Equipment

Dealer Address