Farm Supplies Machinery & Equipment

Made in Europe
Features:
- Self-loading design, simply scoop and mix
- Hydraulic opening at bottom with unloading pipe
- Safety grill with built-in bag breaker
- Incredible European build quality
- Includes electric control kit, hoses and couplings
- Centre Discharge
Dimensions:
Width = 1,900 mm
Flow Range = 50-90 LPM
Full Capacity = 600 L
Full Weight = 2,070 kg
Empty Weight = 630 kg
Other capacities also available - 200L, 250L 350L & 450L. See picture/s for confirmation of those versions.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH CONCRETE MIXER BUCKET (600L)

Heavy duty slashers designed for tough conditions.
Features:
- Fitted with solid rubber tyres. Puncture proofing is available.
- Twin rotors fitted to two 75HP end gearboxes and connected by an extra heavy 110HP centre gearbox. Two-plate slip clutch between each gearbox provides gearbox protection.
- Contra rotating rotors form a flat windrow behind the centre of the slasher, however, two small windrows can be created by reversing the direction of the rotors.
- Front and rear chains can be fitted on request.
- Full 12 month warranty against faulty materials or workmanship.
Specifications:
3PL
Cutting width 3.5m
Weight 975kg
Width (overall) 3.72m
Body construction: 5mm top, 6mm sides
Tractor HP range 70HP+
PTO Series 7 Shaft
Gearbox/PTO speed 540rpm
Centre Gearbox 110HP
End Gearboxes 75HP
Gearboxes Protection 2 Plate Slip Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TWIN ROTOR SLASHERS 3.6M - 0114, 70+HP

NZ6 Adjustable cone jet nozzle
Nozzle suits Udder Gun.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

REGA UDDER GUN - PARTS - NOZZLE - REGA - NZ6

Dimensions : 2,100 DIA x 600 H
Capacity : 2,000 L
Features;
- Very strong, robust design
- Easy to service
- New 75 mm bung great cleaning
- Drain cap at very base of trough, so max. amount of water will empty out when draining
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 12,000L ROUND WATER TROUGH

Using live baits (mice, birds, etc) substantially increases the efficiency of fox and feral cat trapping. Live bait is irresistible to these animals.
Our live-bait trap has a separate secure compartment where the bait animal has room to move about.
Trap dimension is 127cm x 36cm x 47cm.
Guillotine-type door.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SHOOF 127CM FOX LIVE BAIT (NON-FOLDING) TRAP

The Nobili BK series mulcher is a heavy duty multi-purpose machine, fitted with maintenance free bearings. The BK is fitted with an opening tailboard and a mulching bar is fitted to produce a fine mulch.
Features:
Suggested Use: Grass, stubble, pasture topping, vegetable topping, regrowth and green pruning's to 90mm diameter.
Construction: High profile body, opening tailboard and one mulching bar.
Control: Two position fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Category II three point linkage, 2 position manual fixed headstock with floating top link.
Height Control: Skids .
Specifications:
Connection Type: Linkage
Tractor HP: 70-125 HP
Blades (Y with Straight): 52/26
Working Width (mm): 2301
Product Weight (kg): 950
Width / Depth / Height (mm): 2502 / 1493 / 750
Options:
Full Width Roller
Semi Swivel Wheels
Wear Plate
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI BK MULTI-PURPOSE MULCHERS 2.3M - BK230/012 Y FLAILS, 70-125HP

Female Thread = 1/2" BSP
Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1/2" TEE PIECE (FEMALE)

The Aerofast Supastrap net is a lightweight material but still very strong and resistant to snags or rips. The net has heavy-duty webbing sewn into the whole perimeter. The 6mm perimeter bungee cord is attached to this.
Also there are 8 removable plastic hooks supplied to give extra security. Dimensions are the ideal trailer sizes for these nets.
Not waterproof.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AEROFAST SMALL 7FT X 4FT CARGO NET SUPASTRAP

Burders under axle and over axle blade operates similarly with the exception of the over axle blade having more ground clearance.
The blades are suited for heavy duty work and there are several blade options to choose from.
Specifications:
Model: 740
Blade Width: 2.7m
HP Range: 60-100
Options:
Hyd Angle (push off to either side)
Hyd Tilt (camber on road)
Hyd Forward Tilt
Wings
Depth Skids
Mesh Guards
Flip Down Root Rack
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 2.7M (9FT) 740 MODEL STRAIGHT UNDER AXLE BLADE

Telescopic for High Fencing Work Capable of installing posts up to 11ft.
The machine for those in need of specialist tall fencing and post work. All the features of the Multi-Sett machine, plus the ability to drive extra long posts and to drive them deep.
The Tele-Sett (telescopic version of Mulit-Sett) have been around for years and have been tried and tested by farmers and contractors alike.
The Multisett can handle any type of post up to 8 (2.4m) whilst this Tele-Sett can handle posts up to 11" (3.3m) and uses a 227kg (500lb) hammer as standard. If required this hammer weight can be increased by 45kg (100 lbs) either once or twice to increase the impact delivered to the head of the post.
The hammer hydraulically travels up the mast of the post driver and comes down with some force onto the head of the post forcing it into the ground. The integrated auger system on the post driver enables the operator to make a pilot hole which is normally somewhat smaller in diameter than the post to enable a good tight fit.
In its retracted form no taller than a Multi-Sett this added flexibility is gained at no sacrifice in power, rigidity or stability. The longer post is driven with the same ease and accuracy as the standard machine. The mast height setting is infinitely variable throughout its movement range and can be adjusted at any time during operation by the operation of a single lever. When set, it is hydraulically locked there can be no creep or jam while working in extended mode.
Large stabilising pads assure a firm base for the machine in any conditions.
Suits tractors of 40kW (60HP) and over, due to the extra weight, and stability.
The control panel is an enlarged version of the Multi-Sett with the same ergonomic approach to lever movement and control.
Labour saving, all weather system is easy to operate. Its speed and accuracy of setting make it extremely cost effective.
Optional Items include the following...
Power Pack Kit (to drive off the PTO shaft for tractors which do not have suitable remote hydraulics. A hydraulic power pack is available which uses the tractors PTO shaft.)
Side Shift (rear mounted Hydraulic)
Double Side Shift (operates both sides)
Additional Driving Weights
FenceMate Hydraulic Wood Borer with5/8 drill chuck
Skid Steer Attachment Plate
FEL Mounted Wire Winder with Euro Hitch
Augers : sizes available from 70mm - 305mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUNRO TELESETT POST DRIVER (TELESCOPIC HIGH LIFT) INCL AUTODIGGER & TILTS

The Grow-Master aerator can turn your tired, life-less soil into productive, high yielding pastures. This versatile implement will aerate, cultivate and renovate your soils.
The specially designed tines shatter the compact ground, increasing the absorption of water and air which in turn encourages root growth. The tines have a slight twist in them which cracks the ground in a sideways and downwards motion. This allows water, air and nutrients to move readily through the soil profile making them more available for plant roots.
The grow-master is fitted with double rollers which are angled in opposite directions. This reduces sideway drag on the tractor when ground engaging. Each roller can be adjusted for various degrees of angle from 2.5 to a maximum of 10 (four positions).
The maximum offset position is the most aggressive and is most often used for cultivation and for over-sowing new pasture seed. Ballast weight added to the frame will ensure that the tines are buried down to the hub.
Horsepower requirement is quite low with a minimum of only 35Hp required for the 2m unit. A tow hook is mounted on the back for dragging pasture harrows. 2 bolt gang adjustable to alter rotor angle.
Large floor plate deck for carrying ballast (weight) 100x100x6mm RHS Perimeter frame. Heavy Duty 2 triple sealed bearings. Double rollers allow machine to be angle for more aggressive cultivation.
Easy adjust mounting stands. Solid 75mm rotor. Roller is fitted with the same 2 heavy duty bearings used on the Berends Rotary Drain digger for over 30 years. The patented Shatter tines are 8 long and have a unique angle providing a much superior finish to conventional straight tines.
Product Specifications
Aerate, Renovate and Maintain 00 Neutral Setting
The axle is straight
This is used when the soil structure is very friable.
The tines will usually penetrate their full depth.
This setting is usually used to maintain the soil structure, possibly once a year in a maintenance program.
Aerate and Renovate 2.5 Setting
The axle has 2.5 degrees of angle
This is ideal for your first use of the aervator.
If your ground is hard the tines may not penetrate very far, maybe only 25-50 mm.
Dont worry, this is normal. Aeration is not a quick fix.
Aerate and Renovate 50 Setting
The axle has 5 degrees of angle
Use this setting for subsequent uses of the aervator.
With each pass you should change the direction of travel.
Across then diagonally is ideal.
Cultivate and Renovate 7.5 Setting
The axle has 7.5 degrees of angle
On this setting the aervator starts to get aggressive.
You may require additional weight or ballast to acheive maximum depth.
This setting is best used after previous passes and will fracture any compaction layer.
If used on extremely hard ground the tines will probably not penetrate very far.
Cultivate 100 Setting
The axle has 10 degrees of angle
On this setting the aervator is very aggressive.
Again use weight.
This setting is best used after previous passes and will fracture any compaction layer.
If used on hard ground the tines will probably not penetrate very far.
Optional
Trailing Wheelkit includes wheels, drawbar and hydraulic lift (0190)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GROWMASTER 3200 AERATORS - DOUBLE ROTOR - 0178

Heavy duty hydraulic grader blade for tractors up to 130 hp. Ideal for general purpose grading, water table cutting, track earthworks and drain maintenance.
Features:
For tractors up to 130 hp
2700mm (9') wide
600kg
Reversible cutting edge
Full three way adjustment (manual or hydraulic)
Foot stand
Angle movement +/-44 degrees
Tilt movement +/- 26 degrees
Offset movement +/- 33 degrees
Adjustable turntable
Options:
Levelling wheel kit
Hydraulic levelling wheel
Adjustable rippers
Models:
Contractor 600-M (manual operation)
Contractor 600-1 (hydraulic - 1 ram)
Contractor 600-2 (hydraulic - 2 ram)
Contractor 600-3 (hydraulic - 3 ram)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARMGARD 2.7M (UP TO 130 HP) HYDRAULIC (3 RAM) CONTRACTOR GRADER BLADE

Find Farm Machinery For Sale. Browse 7604 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

HIMAC EURO HITCH CONCRETE MIXER BUCKET (600L)

JOHN BERENDS TWIN ROTOR SLASHERS 3.6M - 0114, 70+HP

REGA UDDER GUN - PARTS - NOZZLE - REGA - NZ6

POLYMASTER 12,000L ROUND WATER TROUGH

SHOOF 127CM FOX LIVE BAIT (NON-FOLDING) TRAP

NOBILI BK MULTI-PURPOSE MULCHERS 2.3M - BK230/012 Y FLAILS, 70-125HP

SILVAN 1/2" TEE PIECE (FEMALE)

AEROFAST SMALL 7FT X 4FT CARGO NET SUPASTRAP

BURDER 2.7M (9FT) 740 MODEL STRAIGHT UNDER AXLE BLADE

MUNRO TELESETT POST DRIVER (TELESCOPIC HIGH LIFT) INCL AUTODIGGER & TILTS

JOHN BERENDS GROWMASTER 3200 AERATORS - DOUBLE ROTOR - 0178

FARMGARD 2.7M (UP TO 130 HP) HYDRAULIC (3 RAM) CONTRACTOR GRADER BLADE

Farm Supplies Machinery & Equipment

Dealer Address