Farm Supplies Machinery & Equipment

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3290kg
No. of Bearings: 12
No. of axles: 4
Cutting width: 3.43m (11ft 3inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 28 PLATE X 26 INCH DISCS - 0960

Longline Water Trough for sheep & goats - Medium 50L (2' Waterer)
Specifications:
Length: 640mm
Width: 550mm
Total height: 360mm
Capacity: 50L
Livestock Type: Sheep & Goats
Features:
Medium Troughs (300mm) - recommended for sheep, goats etc
Smooth interior with a 2" drain bung for easy cleaning.
Peg down points at each end
Available as either feed or water troughs
Water troughs come complete with a float and float cover which gives the float full protection from stock damage
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 50L WATER TROUGH

- All steel construction.
- Steel checker plate floor.
- Cat 1
Flat Pack requires assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 6FT X 3.5FT STEEL CARRYALL (FLAT PACK)

Features
- 3 point universal hitch (Category 2).
- Front oscillating bar hitch.
- Single speed unit, 1,000 rpm.
- Reinforced rotor diameter 540 with High Strength Steel flange.
- 6 helical blades per flange.
- Idle side support in oil bath.
- External scraper blades.
- Central cardan with safety bolt (tractor side fork 1 3/8inch Z6).
- Single lateral transmission with gears in oil bath by Valentini-4G.
- Reinforced roller bearings.
- Bearing support with special seals, Labyrinth Bearing Protection by Valentini.
- Reinforced 3rd point hitch.
- Adjustable rear sheets with Fast Regulation shock absorbers.
- Cage Roller (510mm diameter)
Options
Cage Roller (510mm diameter)
Packer Roller (525mm diameter)
In roller versions
Mechanical jacks for depth adjustment.
Larger roller parallel to the transmission.
Protective shroud casing and sledge on outer side.
Safety
CE Safety protections.
Anti-intrusion protections for transport.
Specifications
Power 140 / 190 hp
Power 102 / 142 kW
Working Width 3,100mm
Total Footprint 3,300mm
Blades 72
Working Depth 28cm
Hoe Rotor 259rpm
Blades/Points Rotor 324rpm
Weight Cage Roller 1,770kg
The Apollo High-Power Rotary Tiller has been developed to meet the needs of medium to large farms and is compatible with medium-high power tractors.
Thanks to the By Valentini 4G 4-gear side transmission, it ensures fast, efficient soil processing while reducing tractor fuel consumption.
Suitable for hard ground, grasslands, and crop residue, it features reinforced mechanics and a frame designed for demanding use over time, offering durability and consistent performance.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

VALENTINI 3.1M APOLLO ROTARY HOE (140 - 190HP)

The Honda Trench Badger Pro is a lightweight, handheld mini trencher designed to make trenching faster, easier, and more efficient. Ideal for landscapers, irrigation installers, plumbers, electricians, and contractors, it provides a practical solution for installing irrigation pipe, conduit, low-voltage cable, edging, and other underground services.
Powered by the renowned Honda GX50 4-stroke engine, the Trench Badger Pro delivers reliable performance, excellent fuel efficiency, and low maintenance. Equipped with durable carbide-tipped excavating blades, it effortlessly cuts through soil, clay, and tree roots, achieving trench depths of up to 12 inches (300 mm) and 4.5 inches wide (114mm).
Weighing just 10 kg, the Trench Badger Pro is easy to transport, manoeuvre, and operate in confined spaces where larger trenching equipment isn't practical. Its ergonomic design helps reduce operator fatigue, while Honda's EasyOn starting system and AlwaysOn ignition switch provide dependable starting and hassle-free operation throughout the day.
Whether you're a professional contractor or a serious DIY user, the Trench Badger Pro offers an efficient, cost-effective alternative to hiring or transporting bulky trenching machinery.
Key Features:
- Genuine Honda GX50 47.9 cc 4-stroke engine
- Digs trenches up to 12" (300 mm) deep
- Trench Width up to 4.5" (114mm) depending on blade configuration
- Heavy-duty carbide-tipped excavating blades for long service life
- Lightweight 10 kg design for easy transport and operation
- Ideal for irrigation, plumbing, electrical and landscaping applications
- EasyOn starting system for reliable, effortless starts
- AlwaysOn ignition switch eliminates accidental shut-offs
- Ergonomic soft-touch grip for improved operator comfort
- Solid steel 7 mm drive shaft for durability and dependable performance
- Compact design allows trenching in tight access areas
* Depth varies depending on blade selection and ground conditions.

Ideal Applications:
- Irrigation system installation
- Poly pipe installation
- Low-voltage cable trenching
- Landscape lighting
- Garden and lawn edging
- Plumbing and drainage work
- Telecommunications cable installation
- General landscaping and property maintenance
Built to withstand demanding Australian conditions, the Trench Badger Pro combines Honda reliability with a lightweight, portable design, giving contractors and property owners a powerful trenching solution that delivers professional results while saving time, labour, and equipment costs.
Engine Specifications:
Displacement 47.9cm3
Power 2.2 HP
Fuel Tank Capacity 0.63L
Tube Diameter 26 mm
Drive Shaft Solid Steel, 7 mm
Grip Ergonomic Soft Touch
Harness Single Strap
Usage Warning: Check Soil Conditions First. The TrenchBadger Pro is designed for use in soil conditions that can be trenched with a standard shovel. If the soil is too compacted or dense for a shovelsuch as undisturbed clay, coral, caliche, or large embedded rocks - a heavier-duty trencher may be necessary.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POWERTECH HONDA TRENCH BADGER PRO - 12" (DEPTH) MINI TRENCHER

Telescopic Bypass Powercut Lopper - 650mm - 900mm.
This Wolf bypass lopper with a telescopic handle incorporates POWER®CUT, the new cutting head technology which multiplies the applied force making cuts even easier.
Features:
- The flat headed screws protect the tree from unnecessary damage to the bark.
- In addition to the ultra-lightweight aluminium tubes, these loppers can be telescopically adjusted to the optimal length.
- Non-stick coated blades reduce the adhesion of sap to the blades cutting surface.
- Newly designed shock absorbing rubber buffers minimise the cutting impact as do the ergonomic soft grip handles.
- Manufactured for maximum durability with numerous easy to-replace wearing parts.
- Two-blade or bypass technology is ideal for precise clean cuts on green branches, aiding healing.
- Will cut branches up 50mm in diameter
Replacement blades and other spare parts available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WOLF LOPPER TELESCOPIC BYPASS POWERCUT - 650MM-900MM

Rigid box construction rotary hoes suitable for small-medium sized farms and market gardens, preparation of ground and working in stubble and crop residues.
Features:
30 HP single speed gearbox.
1,580 mm working width.
Side gear drive
48 x C blades
6 blades per flange
Cat I or II three point linkage.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 20-30 HP
Working Width (mm): 1580
Working Depth (mm): 50-150
Product Weight (kg): 205
Total Width (mm): 1710
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 1.58M B30F ROTARY HOE (MIN 20-30HP)

Manitou telehandler trencher frame to suit MT range.
Auger Torque has several hitch & frame options to suit your particular machine, need and application.
All Auger Torque hitches & frames are fabricated in house to the highest standards and with a number of standard hitches & frames on the shelf ready quick delivery.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE MANITOU TELEHANDLER TRENCHER FRAME TO SUIT MT RANGE

30,000L storage silos suitable for all types of liquid supplements, dry feed and fertiliser storage.
Polymasters Cone Bottom Tanks provide the ultimate storage solution for dry bulk and liquid storage or processing applications.
- Steep 50 degree cone
- Heavy Duty DuraGal frame (other materials available)
- Fork channels integrated into frame
- Ideal for sludge clarification and thickening applications
- Multiple outlet options available Liquid or Dry
- Custom pipework can be installed
Heavy Duty Frame 3,450 Dia x 5,363 H (mm)
- Durable Construction
- A One-Piece tank moulded from UV Stabilised, Food Grade MDPE and mounted to a fully Galvanised support structure.
- Re-locatable
- For ease of repositioning, the support structure incorporates fork channels which allow the silo to be moved with a minimum 2 tonne Fork truck when empty. (For Static Storage with Heavy Duty Frame option only)
- Hinged lid for easy access
- Rodent and weatherproof
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 30,000L CONE BOTTOM TANK (LIQUID OUTLET)

This motorised sprayer is a compact yet powerful spraying solution designed for side-by-sides, buggies, and utility vehicles.
Built for maximum efficiency, it features a Polytuff step tank with sump and twin internal baffles to reduce liquid surge, ensuring smooth transport and optimal performance.
Features:
- 250L Capacity UV Stabilised Polytuff tank with calibrated fill markings & front tank sump. Internal Twin Baffles to reduce liquid surge when travelling. Bottom inserts for permanent fixing to a tray or attaching optional Forklift skids.
- Compact and Versatile Design which is ideal for UTVs, buggies, and utilities, delivering the pressure and flow needed to spray up to 15m or operate an 8-nozzle boom (04 nozzles @ 3 bar).
- A 50M EasyRoll 12V Hose Reel Remote-controlled rewind function for effortless spraying and improved efficiency.
- Honda GX120 (3.5hp) Driven with low level oil alert with direct drive 6:1 reduction gearbox.
- Comet MC20/20 18.5L/min open flow capacity and 20Bar/290psi maximum pressure. Silvan self-priming positive displacement oil-backed diaphragm with nitrile diaphragms and corrosion resistant, cast anodised aluminium body.
- Pressure regulator with pressure adjustment and automatic bypass, gauge and 2 outlets - 1 for the hose reel and 1 for an optional boom.
- 3 stage Filtration, to protect the pump and minimize nozzle blockage. Basket strainer under the filling lid and 2 suction filters prior to the pump.
- Powder coated metal construction. Lockable hub with locking pin. Supplied with 30m x 10mm ID ag hose.
- Atomiser spray gun, adjustable from a straight to a conical spray and Atomiser fine mist. Supplied with 1.5- and 2.0-mm ceramic nozzle.
Optional Towbar Booms for Side by Sides:
RP1-33 Silvan 4m Towbar Boom.
RP1-35 Silvan 4m General Purpose Towbar Boom.
RP1-36 Silvan Hi Flow Boomless Nozzle Towbar Boom.
430-115 Forklift channels (pair) DIY Fitment. Bolts and washers included. Can be fitted North/South or East West.
Note: The MC20/20 pump has sufficient flow to increase the size of nozzles in the Towbar booms, standard fitment is Yellow 02, Towbar booms (excluding the RP1-36) can use Red 04 to increase the overall flow rate.
Specifications:
Tank Size: 250 litres
Pump Size: 18.5 L/min
Max Pressure: 290 psi
Height/Width/Length: 900mm / 835mm / 1,010mm
Product Weight: 59 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN MOTORISED 250L SQUATPAK INC 50M REMOTE HOSE REEL

Consuming 100,000 tons of high quality Swedish steel annually, UNIA is the largest manufacturer of agricultural machines in Poland with nearly 25,000 machines sold per year, of which over 10,000 are exported to 60 countries around the world, including right here in Australia.
Designed for pre-sowing and stubble tillage.
Based on 2 rows of discs that provide easy cutting of the soil intense mixing any plant residues with hay.
Can operate as seedbed combination unit due to the possibility of extending it of a carriage with draw-bar for the semi-mounted version.
High area performance at low fuel consumption and low wearing rate.
Possibility of extension to the semi-mounted or Drive versions (on the tyre and transport roller, ø670 mm).
Features :
Weight With Roller: 3,630 KG
Power Demand: 170-210 HP
No. Of Discs: 48
Suspension axle: 70-825/36 mm
2 rows of 560/4 mm Classic toothed discs, protected by 35x190mm or 42×160 mm shock absorbers (version 4H)
Maintenance-free hub with triple lip seals
600 mm pipe roller
Mechanical / Hydraulic adjustment of working depth
Row of spring levelling fingers
Rigid frame (versions 34)
Hydraulically folded frame (versions H 4 H 7.5)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

UNIA ARES XL 6M CUT SPEED DISC CULTIVATOR - UNIA - ARESXL6H, 170-210HP

3.25m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3505 - 3.25m (10ft 8in) 2/12 Tine, 2/16 Tine - 58kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Find Farm Machinery For Sale. Browse 7532 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 28 PLATE X 26 INCH DISCS - 0960

RAPID PLAS 50L WATER TROUGH

SOUTHERN CROSS AG MACHINERY 6FT X 3.5FT STEEL CARRYALL (FLAT PACK)

VALENTINI 3.1M APOLLO ROTARY HOE (140 - 190HP)

POWERTECH HONDA TRENCH BADGER PRO - 12" (DEPTH) MINI TRENCHER

WOLF LOPPER TELESCOPIC BYPASS POWERCUT - 650MM-900MM

BREVIGLIERI 1.58M B30F ROTARY HOE (MIN 20-30HP)

AUGER TORQUE MANITOU TELEHANDLER TRENCHER FRAME TO SUIT MT RANGE

POLYMASTER 30,000L CONE BOTTOM TANK (LIQUID OUTLET)

SILVAN MOTORISED 250L SQUATPAK INC 50M REMOTE HOSE REEL

UNIA ARES XL 6M CUT SPEED DISC CULTIVATOR - UNIA - ARESXL6H, 170-210HP

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Farm Supplies Machinery & Equipment

Dealer Address