Farm Supplies Machinery & Equipment

Teat Calf Flange-type,
Replacement flange-type teat for regular 2L and 3L calf-hutch or hand-held bottles.
NB: When mounting, slit should be vertical, with longer teat-part upper most.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF TEAT CALF FLANGE-TYPE

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60-130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 2120kg
No of bearings: 8
No of axles: 4
Cutting width: 3.2m (10ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 6MM DISCS - 0843, SUIT 60-130HP

100mm 4 Series auger (Standard conditions - Tungsten Carbide) up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 100MM AUGER (STANDARD- TUNGSTEN) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

Compact model is designed for small horsepower tractors where linkage arms have limited lifting height.
Features:
Fitted with high quality European gearboxes and drive shafts. All shafts are fitted with a torque limiting clutch (tractor end) which is more effective than a slip clutch.
Digs to a maximum 4ft (1200mm) depth if ground conditions permit.
Standard model is suitable for augers from 4in to 12in diameter.
All models are fitted with jib hook and transport chain as standard. Heavy duty model is also fitted with auger control handle for easy positioning.
Specifications:
PTO Shaft: Series 3/L2 torque limiting clutch
Gearbox: 40HP
Main frame: 100x50x6mm
Tractor Hp Required: 16-30HP
Nett Weight less auger: 85kg
Options:
0279 4 auger
0265 6 auger
0267 8 auger
0269 10 auger
0271 12 auger
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS POST HOLE DIGGERS COMPACT - 0258

Ball Valve Tap 1 1/2" FF
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS BALL VALVE TAP 1 1/2" FF

Trailed air assist Supaflo 3,500 litre sprayer with 161 L/min diaphragm pump, electric controls, a Glideflex axle upgrade, wide angle shaft and a 900mm fan.
Ideal for orchards with trees up to 4 metres high.
Additional model available with 249 L/min pump (DAB36AF7G).
Specifications:
Market: Horticulture
Tank Size (L): 3500
Connection Type: Trailed
Min PTO hp: 80
Pump Size (L/min): 161
Height / Width / Length (mm): 1800 / 1830 / 4755
Product Weight (kg): 800 (dry)
Application: Orchards
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, anodised cast aluminium body with brass heads and manifolds. IDS1701: 161L/min. capacity, 5000kPa pressure.
Fan Size: 900mm axial flow type, 10 bladed fan with curved nylon reinforced blades with air straightening vanes and protective mesh cover. Powerhead and Radak fitted with 920mm axial flow type, 10 bladed fan, centrifugal clutch and protective mesh cover.
Nozzles: Flip-over type for dilute/concentrate spraying. Ceramic jets, stainless steel swirl-plates. 16 double sided nozzles (8 per side) twist on/off. The Powerhead has 24 double sided nozzles (12 per side) and the Radak has 32 (16 per side).
Gearbox: Oil-bath type, 2-speed with neutral position
Controls: 40 Bar electric section valves with master valve, electric pressure regulator and in cab controls.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, built-in chemical mixer and 40L fresh water hand wash tank. Camlock bottom fill.
Frame: Galvanised steel with jockey wheel and adjustable drawbar.
Agitation: Pump bypass plus venturi agitator
Pressure gauge: Glycerine filled gauge located on valve bank.
Filtration: Lid strainer, suction line filter and nozzle cap strainers.
Wheel Equipment: Glideflex suspension axle fitted with 16" tyres and galvanised rims (speed rating 30 km/h)
PTO Driveshaft: Quality Bondioli & Pavesi constant velocity driveshaft with quick release pins & safety cover.
HP Required: Min 80PTO HP
Options:
- Powerhead Conveyor (in lieu of standard fan cowling) (D99-184)
- Radak Conveyor - Manual adjustment of top and bottom wings (In lieu of standard fan cowling) (D99-135)
- SCRAM Jet (to suit Radak conveyor) (D99-180)
- Hydraulic kit for Radak Conveyor (top wings) (D99-155B)
- Leaf guard (to suit Powerhead & Radak) (D99-175)
- Two-sided poly vineyard conveyor (D99-111)
- Double spray lines (Powerhead - includes upgrade to 1000mm fan) (D99-189)
- Double spray lines (Radak) (D99-190)
- Bravo 180S automatic rate controller (D99-143)
- BKT flotation tyres 558-400/55 - 22.5 (in lieu of standard singles) (D99-79)
- Tandem suspension axle with 10 x 15 wheels (D99-75)
- Additional model available with 249L/min pump (DAB36AF7G).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 3,500L SUPAFLO TRAILED SPRAYER - MIN 80PTO HP

4" BSP Brass Through Tank Fitting
Features:
1 1/2" outlets and bigger have a left-hand threaded lock nut for secure fitting. Does not unscrew when attaching valves
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 4" BSP BRASS THROUGH TANK FITTING

13,500L Cone Bottom Tank on Stand.
Specifications:
Total height: 3700mm
Inlet height: 3500mm
Diameter: 2500mm
Features:
15 degrees cone bottom and full drain bung for total evacuation of contents
Ribbed sidewall tanks for superior strength
Self supporting roof with no internal fixtures or supports
2" complete draining Banjo fitting installed on all tanks (Optional 3" available)
3 Positive tie down points / lifting lugs
Heavy duty galvanised steel frame (Complete stainless steel stands available on request)
Supplied in translucent green colour so level of contents can be seen (Also available in black)
450mm hinged & vented lid
Rated for 1.5SG liquids
Stand also available with forklift slippers for safe and easy lifting when empty.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 13,600L CONE BOTTOM TANK ON STAND

The Nobili RM series mulchers are heavy duty machine ideal for use in citrus groves, orchards and broadacre stubble. The RM has a hinged tailboard and wear plate as standard. These machines have a helical blade pattern for a lower power requirement.
Features:
Suggested Use: Grass or stubble and green prunings up to 100 mm for tractors up to 280HP.
Construction: High profile, adjustable tailboard, one mulching bar.
Control: Fixed headstock.
Attachment: Cat. II, three point linkage.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys, dual drive (drive from both ends) and electronically balanced rotor.
Height Control: Rear wheels.
Semi Swivel Wheels Standard
Specifications:
Connection Type: Linkage
Tractor HP: 120-200 HP
Blades (Y with Straight): 72/36
Working Width (mm): 3231
Product Weight (kg): 1820
Height / Width / Depth (mm): 1770 / 3477 / 860
Options:
Full Swivel Wheel Kit N402300
Roller (Removable Ends) N4945003
End Tow Kit N400674
NOTE: There is a $770.00 surcharge for machinery assembly and blade changes (Excludes price of blades).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 3.2M RM STUBBLE MULCHER (UP TO 280HP)

Linkage air assist Suntuff 400 litre sprayer with a 67 L/min diaphragm pump and 700mm fan. Ideal for smaller vineyards or orchards and smaller horsepower tractors.
Specifications:
Market: Viticulture. Horticulture
Tank Size (L): 400
Connection Type: Linkage
Min PTO HP: 20
Pump Size (L/min): 67
Height / Width / Length (mm):1200 / 1190 / 1330
Product Weight (kg): 134
Application: Vineyards and Orchards
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body. APS71: 67L/min. capacity 5000kPa pressure. APS96: 88L/min. capacity 5000kPa pressure.
Fan Size: Axial flow type, fan with curved nylon reinforced blades, galvanised cowling and protective mesh cover. 600mm with 8 blades on 200L unit. 700mm with 8 blades on 400L unit. 800mm with 10 blades on 500L unit
Nozzles: Flip-over type for dilute/concentrate spraying, ceramic jets, stainless steel swirl-plates. 200L unit: 10 single nozzles (5 per side) twist on/off. 400L unit: 12 flip over nozzles (6 per side) twist on/off. 500L unit: 14 flip over nozzles (7 per side) twist on/off.
Gearbox: Single-speed with neutral position, oil-bath type.
Controls: 3 outlet with pressure regulator. 400/500L models standard with extra length hoses - for tractor control mount.
Tank: Polytuff, impact resistant, polyethylene construction with litre calibrations, non-spill screw-down lid.
Frame: Galvanised steel, suit cat I & II linkage (200L cat I linkage only).
Agitation: 200L: bypass, 400L / 500L: dual bypass.
Pressure Gauge: Glycerine filled gauge, located on the control valve.
Filtration: Lid strainer, suction line strainer and stainless steel nozzle filters.
PTO Driveshaft: Quality driveshaft with quick release pins & safety cover.
HP Required: 200/400L: Minimum 20 PTO HP, 500L: Minimum 40 PTO HP.
Fitment Options:
- Two sided deflector (600mm fan size)
- Two sided deflector (700mm fan size)
- Two sided conveyor (700mm / 800mm fan size)
- Two sided deflector (800mm fan size)
- Bottom air deflectors (600mm / 700mm / 800mm fan size)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 400L SUNTUFF LINKAGE SPRAYER - MIN 20PTO HP

Do you need an easier way to dispense bulk bags?
Vogal Easy-Pour means you do not have to use the entire bulk bag when you open it. Simply place the bag on top of the Easy-Pour unit to pierce the bag. Then dispense the contents into your fertiliser spreader at your leisure, stopping at any time.
Made from stainless steel for durability in highly corrosive environments such as fertiliser.
Easy-Pour bulk bag dispensers simply spike into the bag for you to dispense on demand via the dispenser gate.
Easy-Pours are made from stainless steel apart from the 'tabs' that hold it in the bag. This gives it great corrosion resistant properties.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA BULK FERTILISER BAG DISPENSER (EASYPOUR)

Selecta Polytuff tanks are constructed for the toughest Australian conditions. Ideal for agriculture,industrial and speciality applications.
Each tank is a product of careful testing and manufacture to ensure a strong, durable and maintenance free tank ideal for years of service in harsh Australian conditions.
A wide range of Polytuff tanks in assorted shapes and sizes. Sizes range from 20 to 2200 litres.
They are available in free standing or in bare formats. Free standing tanks are easily mounted onto truck trays, trailers or utilities.
Features
Strong UV stabilised polyethylene
Lightweight, strong construction
Impact resistant
Spill proof lid
Chemical resistance
Calibrated volume sight lines
Smooth easy to clean interior surface
Specifications
Height / Width / Depth: 490mm / 580mm / 660mm
Weight 8kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 100 LITRE UTEPAK TANK - SILVAN - 430-0100A

Find Farm Machinery For Sale. Browse 7532 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

SHOOF TEAT CALF FLANGE-TYPE

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 6MM DISCS - 0843, SUIT 60-130HP

DIGGA 100MM AUGER (STANDARD- TUNGSTEN) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

JOHN BERENDS POST HOLE DIGGERS COMPACT - 0258

RAPID PLAS BALL VALVE TAP 1 1/2" FF

SILVAN 3,500L SUPAFLO TRAILED SPRAYER - MIN 80PTO HP

RAPID PLAS 4" BSP BRASS THROUGH TANK FITTING

RAPID PLAS 13,600L CONE BOTTOM TANK ON STAND

NOBILI 3.2M RM STUBBLE MULCHER (UP TO 280HP)

SILVAN 400L SUNTUFF LINKAGE SPRAYER - MIN 20PTO HP

RATA BULK FERTILISER BAG DISPENSER (EASYPOUR)

SILVAN 100 LITRE UTEPAK TANK - SILVAN - 430-0100A

Farm Supplies Machinery & Equipment

Dealer Address