Farm Supplies Machinery & Equipment

Built for rugged Australian conditions using top quality components. Horsepower requirements of 40-75HP. Available in 5ft (1.5m) to 6ft6in (2.0m) sizes.
A slasher manufactured for rugged Australian conditions, heavily built using top quality components to give you the best value for money obtainable.
Features:
One piece body made from 6mm quality steel. Excellent underframe clearance clears cut material quickly.
Bondioli & Pavesi Series 5 pto driveshaft with 2 plate slip clutch protects slasher and tractor.
75 HP oil lubricated gearbox. Optional Italian manufactured gearbox upgrade. Excellent seal guards make it virtually impossible for wire to damage the gearbox.
Cat 1/2 linkage.
Hardened and tempered straight/stepped bushed slasher blades.
Floating headstock for working on undulating ground.
Optional solid rubber wheelkits and rollers available for depth control.
Standard with front and rear chain guards.
Document holder supplied.
Optional galvanising available.
Full 12 month warranty on design and manufacture.
Specifications:
Centre Mount
Cutting Width 1950mm
Overall Width 2080mm
Overall Length 2060mm
Tractor HP 40-75
Cutting Height 25-100mm
Weight 490kg
Options:
1590UG Italian Manufactured 75HP Gearbox Upgrade
0095 Heavy Duty Slasher Wheel Kit (Pneumatic Wheel)
0110GAL HD200 Slasher with Galvanised Deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS HD200 SLASHERS 2M - 0110, 40-75HP

3m Pasture Toppers - 0116
75HP centre gearbox
75HP outside boxes
The high speed Razor Cut pasture topper gives superior sharp, clean cutting promoting pasture rejuvenation. Pasture toppers are designed specifically for topping and should not be used as a slasher or in areas where they may strike stumps or rocks or scalp the ground.
Features:
Available in 10ft three point linkage model only.
Twin rotors fitted to two 75hp end gearboxes and connected by a 75hp centre gearbox.
Heavy Duty PTO fitted with two plate slip clutch.
Very high tip speed provides a cut rivalling many finishing mowers. Timed, deeply stepped twisted blades uplift pasture and allow the topper to evenly spread the cuttings.
Adjustable skids allow easy cutting height adjustment.
Optional 14 Holden wheelkit controls the topping height instead of the skids. Adjusted either via ratchet (standard) or hydraulic ram (optional).
Machine can be operated behind smaller tractors as topping is not high horsepower work.
Fitted standard with front guards to prevent material being thrown forward over the tractor.
Full 12 Month Warranty against faulty materials or workmanship.
Specifications:
Cutting Width 2.9m
Cutting Height (using wheels) 25-200mm
Weight 500kg
Length (Overall) 1.85m
Width (Overall) 3.12m
Headstock Rigid/Floating Top Link
Body Construction 3mm body, 6mm sides
Tractor HP range 35HP+
PTO Series 5 shaft with 2 plate slip clutch
Gearbox/PTO Speed 540rpm
Centre Gearbox 75HP
End Gearboxes 75HP
Gearbox Protection Flexidrive rubber coupling systems with added shearbolt protection.
Tractor Cat Connection Cat 1/2
Options:
0117 Wheel Kit suit 3m (10ft) Pasture Topper 2 Holden Castor Wheels
0118 Hydraulic Ram & Hoses suit 10ft Topper In lieu of ratchet
0119 Hydraulic Ram & Hoses suit 10ft Topper as spare part
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 10FT PASTURE TOPPERS 75/75HP - 0116, MIN 35+HP

Stainless Steel Mesh - 1200mm high x 20m long.
Product Size - 1200mm x 6.5 x 6.5 x 0.63mm x 20m
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LEMPRET WIRE & SEALANTS STAINLESS STEEL 316 MESH - 1200MM HIGH X 20M LONG

The Rubber Series range of Climaxx Ramps are built for use with pneumatic [air filled] tyres, and Multi-Terrain Loader rubber tracks. The unique tread surface of this range has been designed to obtain the highest possible strength and the lightest possible weight, together with a smooth, safe ride.
Ideal for Earthmoving Contractors, Plant Hire Companies, Landscapers, Government Departments or any application where wheeled, and rubber tracked machinery must be transported safely and effectively.
Featuring the next lowest Ramp weights after the ATV Series & Mower Series whilst maintaining Surewelds full level of quality, select from this range where Ramp weights are critical and machinery with pneumatic tyres or rubber tracks is to be loaded.
Where steel tracks are to be used on Ramps, please refer to the T Series which have a different tread surface to the Rubber Series. Please see the table below, for SureWelds full range of Rubber Series Ramps.
Specifications:
Rated Capacity: 6,000kg
Ramp Mass: 52kg
Ramp Length: 3.6m
Track Width (internal): 500mm
Ramp Width: 600mm
Ramp Depth: 165mm
Features:
Tread Surface of Rubber Series Ramps.
Steel Pin Connection.
Foot adaptable to varying gradients.
Models:
6/1524R - 1,500kg Rated Capacity, 16kg Ramp Mass, 2.4m Ramp Length, 300mm Track Width (internal), 390mm Ramp Width, 90mm Ramp Depth
6/1533R - 1,500kg Rated Capacity, 22kg Ramp Mass, 3.3m Ramp Length, 350mm Track Width (internal), 440mm Ramp Width, 90mm Ramp Depth
7/1929R - 1,900kg Rated Capacity, 18kg Ramp Mass, 2.9m Ramp Length, 300mm Track Width (internal), 390mm Ramp Width, 90mm Ramp Depth
6/3016R - 3,000kg Rated Capacity, 12kg Ramp Mass, 1.6m Ramp Length, 350mm Track Width (internal), 440mm Ramp Width, 90mm Ramp Depth
7/3029R - 3,000kg Rated Capacity, 24kg Ramp Mass, 2.9m Ramp Length, 300mm Track Width (internal), 400mm Ramp Width, 110mm Ramp Depth
7/3033R - 3,000kg Rated Capacity, 27kg Ramp Mass, 3.3m Ramp Length, 300mm Track Width (internal), 400mm Ramp Width, 110mm Ramp Depth
7/3635R - 3,600kg Rated Capacity, 33kg Ramp Mass, 3.5m Ramp Length, 350mm Track Width (internal), 450mm Ramp Width, 120mm Ramp Depth
7/4040R - 4,000kg Rated Capacity, 47kg Ramp Mass, 4.0m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4536R - 4,500kg Rated Capacity, 42kg Ramp Mass, 3.6m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4833R - 4,800kg Rated Capacity, 39kg Ramp Mass, 3.3m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/6036PT - 6,000kg Rated Capacity, 52kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 165mm Ramp Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 3.6M, 6,000KG CAPACITY CLIMAXX RUBBER SERIES LOADING RAMP

Mesh Gate - 1800mm. (6ft)
All gates are manufactured from 25NB pipe and are a standard 1170mm high.
Features:
- All made with 200mm x 100mm x 5.0m mesh infill
- Available in widths from a 830mm (2'8") personnel gate to a - 4800mm (16') farm gate
- All gates over 2400mm (8') have a vertical 'I' brace and two braces in gates over 4200mm (14')
- 'N' bracing also available for gates over 2400mm (8')
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LEMPRET WIRE & SEALANTS MESH GATE - 1800MM (6FT)

Specifications:
Market: Viticulture.
Tank Size = 2,000 L
Connection Type: Trailed
Rows = 3
Min PTO hp: 80
Pump Size : 500+ LPM
Application: Vineyards
Dimensions - Length measured with linkage hitch:
Length: 4,680 mm
Width Less Head: 1,800 mm
Width Folded: 2,490 mm
Height: 3,330 mm
Weight 990 kg (Dry)
Includes spray heads, independent 320mm hydraulic fans, hydraulic drive stainless steel pump, automatic spray rate controller, self contained hydraulic drive system and tandem suspension axle. Ideal for vineyards.
Model Specifications
- Head Two row spraying head: 28 venturi air shear adjustable nozzles with individual metering and on/off taps. Left and right arms are independent hydraulic folding with adjustable width and centre frame. Boom frame is galvanised.
- Pump Multi-stage hydraulic drive pump, multiple impellers made with highly resistant engineering plastic for excellent chemical compatibility. 500+L/min. Driven by tractor remotes.
- Fan Size 320mm turbine fan, one per air tube, 3600rpm. Power consumed 29kw/38HP.
- Hydraulic Control Hitch mounted hydraulic power pack with: 40L oil reservoir with cartridge particulate filter, motors fitted with case drain, hydraulic distribution block incorporates anti-cavitation and pressure relief valves, 12V oil cooler.
- Nozzles Air shear.
- Controls Electric section valves with Bravo 180S automatic rate controller. Large 100mm pressure gauge.
- Tank Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and 40L fresh water hand wash tank.
- Frame Galvanised steel chassis, linkage hitch fitted with hydraulic power pack.
- Agitation Venturi agitator.
- Filtration Lid strainer and large capacity suction filter.
- Wheel Equipment Tandem suspension with 10x15inch wheels and tyres.
- PTO Driveshaft Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
- HP Required Minimum 60 PTO HP
Factory Options
- Hydraulic pump driven through power pack.
- Hydraulic Height Adjustment phased or independent.
- Hydraulic Row width adjustment phased or independent.
- Bravo 180S spray rate controller with hydraulic controls (in lieu) up to 5 sections.
- Bravo 180S spray rate controller with hydraulic controls (in lieu) 7 sections.
- Bravo 400S automatic rate controller with GPS guidance (in lieu) 7 spray sections.
- Bravo 400S automatic rate controller with hydraulic controls, GPS guidance (in lieu) 7 spray sections + 7 hydraulic sections.
- IBX 100 ISOBUS controller (in lieu requires compatible in-cab console).
- Delta 80 Universal Terminal to suit ISOBUS control.
- Quick turning hitch.
- Electric braked tandem suspension axle via trailer plug in lieu of standard axle.
- Hydraulic braked tandem suspension axle in lieu requires compatible tractor remotes.
- 100L Flush Tank
- Road Kit Brake and indicator lights with folding Oversize sign.
- Tail Light Kit Brake and indicator lights via trailer plug.
NOTE: Not all options will fit all models. Extra charges may apply to fitment of some options.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 2,000L (3 ROW) TRAILED SCRAM CROSS - MIN 80 PTO HP

This compact 200L rainwater tank is perfect for units and townhouses, suitable for a variety of applications from watering the garden to washing the car. This certified rainwater tank is manufactured with strength in mind.
When you invest in a rainwater tank its important that you get one that lasts and is fit for purpose. Australian standards are put in place to give households, peace of mind when it comes to a tanks usability.
Dimensions:
Capacity : 200 L (45 gallons)
Diameter: 600 mm
Inlet Height : 900 mm
Overall Height :900 mm
Features:
- Self supporting roof means no support poles are necessary
- One piece construction means no joins or seams
- Solid brass threaded outlet & ball valve as standard
- Upgraded outlet and ball valves are available at an additional cost
- Certified to AS/NZS 4766:2006 Standard
- Outlet standard position 6 o'clock
- Outlet position can be moved from standard based on positions on the Fit Out Clock
- Replacement manhole covers and strainers available
- Available in 22 Colours
- 90mm overflow as standard
Standard Fit Out:
Strainer Position: Centre
Outlet Position: 6 o'clock
Overflow Position: 12 o'clock
Strainer Size: 200 mm
Outlet Size: 25 mm (brass)
Ball Valve: 25 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 200L RAINWATER TANK

Fitted with high quality European gearboxes and drive shafts. All shafts are fitted with a torque limiting clutch (tractor end) which is more effective than a slip clutch.
Features:
Fitted with high quality European gearboxes and drive shafts. All shafts are fitted with a torque limiting clutch (tractor end) which is more effective than a slip clutch.
Digs to a maximum 4ft (1200mm) depth if ground conditions permit.
Heavy Duty model suitable for augers from 4 to 24 diameter.
All models are fitted with jib hook and transport chain as standard. Heavy duty model is also fitted with auger control handle for easy positioning.
Specifications:
PTO Shaft: Series 3/L3 torque limiting clutch
Gearbox: 85HP
Main frame: 89x89x5mm RHS
Tractor Hp Required: 30-100HP
Nett Weight less auger: 130kg
Options:
0279 4 auger
0265 6 auger
0267 8 auger
0269 10 auger
0271 12 auger
0273 15 auger
0275 18 auger
0277 24 auger
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS POST HOLE DIGGERS HEAVY DUTY (85HP) - 0261

Suitable for raking, turning and spreading hay crops, silage and grain crop stubble.
Construction: Simple robust construction requiring minimal maintenance.
Drive Line: Ground drive.
Control: Single set hydraulics via tractor remote.
Attachment: Cat. II clevis to tractor drawbar.
Windrow Width: 3 6ft / 0.9 1.8m
Specifications:
Type: Trailed V with Dual Hydraulic Kicker Wheels Standard
Working Width (m): 7.6
Product Weight (kg): 1680
Number of rake wheels (L/R-Splitters): 6/6 +2
Tynes Per Wheel: 40
Rake wheel diameter: 1400mm
Transport width: 2.5m
Number of Ground Wheels/Size: 4 x 205-75/15
Note: Hayrakes Delivered Unassembled
* Maximum working width and speeds depend greatly upon product raked, volume and general conditions.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SITREX HYDRAULIC TRAILED MAGNUM V HAYRAKES - 6L/6R+2 RAKE WHEELS - SITREX - HR-MK12

Note: This model does include a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 16
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 1.6M S-TINE (16 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 32HP

Made in Australia. Our PE material is UV stabilised for Australias harsh sun so its suitable for coastal locations as well.
Tested and certified to Australian standards AS/NZS 4766 and with a 5 year warranty this is the ideal fleet solution for your bulk AdBlue storage needs.
Dimensions:
Length : 2,870 mm
Width : 940 mm
Height : 2,150 mm
Capacity : 3,000 L
Features:
- External liquid level indicator
- 2 Stainless Steel dry-break & pipework
- 2 Outlet and Ball Valve
- Mechanical overfill protection
- Earthing Rod
- Breather Vents
- Inspection hatch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 3,000L ADBLUE SLIMLINE TANK

Features:
Heavy-duty 3-point and quick hitches
Solid-steel kingpins
1/2in x 6in replaceable cutting edge
Fit tractors up to 90 HP
Model:
9107-01 2.1m 370kg 90HP Red Powder Coat
9107-03 2.1m 370kg 90HP Green Powder Coat
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP 91 SERIES GRADER BLADES 2.1M - 9107-01, MAX 90 HP

Find Farm Machinery For Sale. Browse 7618 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS HD200 SLASHERS 2M - 0110, 40-75HP

JOHN BERENDS 10FT PASTURE TOPPERS 75/75HP - 0116, MIN 35+HP

LEMPRET WIRE & SEALANTS STAINLESS STEEL 316 MESH - 1200MM HIGH X 20M LONG

SUREWELD 3.6M, 6,000KG CAPACITY CLIMAXX RUBBER SERIES LOADING RAMP

LEMPRET WIRE & SEALANTS MESH GATE - 1800MM (6FT)

SILVAN 2,000L (3 ROW) TRAILED SCRAM CROSS - MIN 80 PTO HP

POLYMASTER 200L RAINWATER TANK

JOHN BERENDS POST HOLE DIGGERS HEAVY DUTY (85HP) - 0261

SITREX HYDRAULIC TRAILED MAGNUM V HAYRAKES - 6L/6R+2 RAKE WHEELS - SITREX - HR-MK12

JOHN BERENDS 1.6M S-TINE (16 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 32HP

POLYMASTER 3,000L ADBLUE SLIMLINE TANK

FIELDQUIP 91 SERIES GRADER BLADES 2.1M - 9107-01, MAX 90 HP

Farm Supplies Machinery & Equipment

Dealer Address