Farm Supplies Machinery & Equipment

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75HP-165HP tractors.
Fitted with 24inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2510kg
No of bearings: 16
No of axles: 8
Cutting width: 3.66m (12ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 6MM SCALLOP DISCS - 0863, SUIT 75-165HP

1.8mm Clip gun - Air driven.
Includes Gun & Oil.
In the eyes of the fencing contractor attaching netting is considered the worst part of the job as it is not only tedious but it is a backbreaking job having to bend down to clip off to the bottom wire and extremely tough on the hand. After listening to the farming community, Marchant Engineering, in 2005, introduced the Air Operated Clip-Gun for tying hinge joint and ring lock to plain wire and changed the way farmers and contractors approach the laborious and painstaking task of attaching netting to a fence line.
Our 1.8mm Air Operated Clip-Gun has been very successful over the last seven years converting fencing contractors and farmers to this type of air driven tool so much so that many have come back to us in search of other clip-guns capable of handling both larger and smaller clips. So we have now added two more Air Operated Clip-Guns and two Manual Clip-Guns to extend our range.
We also stock clips are made from semi tough wire that have a heavy duty zinc aluminium coating that protect the clips from rusting even after they have formed a tight circle around the wire. Stainless steel clips are also available.
Features:
- Dispenses a 1.8mm thick zinc aluminium coated semi hard wire clip with inscribe circle 5.5mm
- Can use both zinc aluminium or stainless steel clips
- Runs off a minimum 10 CFM air compressor
- Air compressor must be regulated to 90-100 PSI
- Magazine holds 100 clips
- Designed for attaching ring lock and hinged joint to plain wire to a farm fence
- Zinc aluminium clips sold as boxes of 10,000 clips
- 12 month warranty with parts and servicing from our Australian factory.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MARCHANT ENGINEERING PTY LTD 1.8MM CLIP GUN - AIR DRIVEN

Offering a choice of reach from 6.0m to 6.7m (this model) making the 5 - Series an ideal fit for contractors and local government. Has the reach and power to tackle extensive verge-mowing and hedge-cutting duties.
This model priced with "1.2m Flail Mower" head, but you can order with Hedge Trimmer Cutter Bar instead or additional (as pictured) with1.5m, 1.7m or 2.4m sizes.
Built to last from super-strong Domex steel, these machines are extremely robust and feature such enhancements as SoftStart rotor engagement, hydraulic safety breakaway, and a cushioned top link for increased longevity.
Specifications:
Max reach - 6.7m (21'9")
Weight - 1,611kg
Min HP - 65hp
Tractor Weight Requirement - 3,000kg
3PL attachment
Key Features:
Slide-mount flailhead.
240 degree rotation.
Dual direction cutting.
Hydraulic slew.
Hydraulic breakaway protection.
200 litre oil tank capacity.
Cast iron pumps and motor.
Angle float.
Road lighting.
Lift float.
Axle mounting (optional).
Oil cooler kit.
Controls:
Proportional electric controls (EPP).
Flailheads:
1.2m sliding mount belt-drive flailhead.
Tractor Requirements:
From 65hp, 3,000kg (min weight)
Arm Sets:
Standard 6.0m )smaller model)
Parallel arm geometry (both models).
Telescopic 6.7m (this model)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP TWOSE 5 - 6.7M REACH MOWER INC FLAIL HEAD (MIN 65HP)

Stainless steel construction. 1 metre width, non-drip nozzle assemblies.
Specifications:
Nozzle Quantity: 2
Boom Width (m) : 1.05
Spray Width (m) : 2
Nozzle Spacing (m) : 1
Min Boom Height (mm) : 1,000
Weight (kg) : 2
Folding Position: None
Features:
- supplied with connecting hose, on/off tap and mounting clamps
- LC-15 anvil deflector nozzles @ 2 bar .97L/min
- includes breakaway clips boom unclips if an obstruction is hit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 1.05M PAK BOOM (2M SPRAY WIDTH)

Heavy duty cracker ripper / subsoiler with shearbolt breakout for breaking up pans and compacted soils. Suitable for tractors from 200 to 350 hp.
Specifications:
Working Width: 360cm
Required HP: 220-350hp
Weight: 2475kg
No of Blades: 7
Features:
16mm shearbolt breakout
Double spike roller
Hydraulic depth control
650mm working depth
70 x 18mm point
Foot stands
Category three linkage
Fin clod busters
Options in Lieu of Standard:
Pivoting side plates
Models:
ALCE-P300/7 310cm Working Width 200-350HP 2350kg 7 Points
ALCE-P350/7 360cm Working Width 220-350HP 2475kg 7 Points
ALCE-P350/9 360cm Working Width 240-350HP 2595kg 9 Points
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.6M (220-350HP) ALCE-P RIPPER / SUBSOILER

Dimensions : 3,492 L x 580 W x 350 H
Capacity : 250 L
Say goodbye to wasting water and time cleaning your troughs.
With Sweep Troughs, cleaning is a breeze. Our troughs are designed to sweep out the dust that settles on top and then turns to sludge at the bottom. And the best part - Using our sweep brooms, you dont have to empty the trough to clean it. Just sweep it out.
Upgrade your farm yard today and make cleaning your troughs a hassle-free experience.
The perfect solution for those in need of a durable and portable drinking option for your animals. With our rust-resistant sweep troughs, you can leave them outside without any fear of corrosion or damage.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 450L SWEEP TROUGH (25MM VALVE)

Features:
- Probe senses movement, such as vehicles, and sound the alarm in the receiver
- Transmits up to 800m in line of sight
- Wall mountable sensor is battery operated
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN WIRELESS MAGNETIC DRIVEWAY SENSOR

Extra heavy duty hydraulic side-shift mulcher, for tractors from 80-140 hp. Suitable for mowing grass and mulching prunings and wood up to 150mm in diameter.
Features:
- 140 hp rated gearbox
- 2400 RPM rotor speed
- 30cm high intake
- Integrated over-run clutch
- High clearance intake (30cm)
- Hydraulic side shift (60cm)
- Fixed upper and rear counter blades
- Double skinned chassis
- 220mm diameter adjustable rear roller for cutting height
- Side skids
- 5 belt side transmission with automatic belt tensioner
- 540 rpm PTO
- Front protection chains
- Flat hammer flails (1.4kg)
- 20mm flail bolt
- 8 + 8mm chassis
Overall Width = 2,880 mm
Cutting Width - 2,600 mm
Hammers = 20
HP Required = 100 - 120hp
Weight = 1,080 kg
Options Available:
Y Flails, in Lieu of Hammer Blades
Self Steering Rear Wheels, in Lieu of rear roller
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.6M (100-120HP) JUPITER EXTRA HEAVY DUTY SIDE-SHIFT MULCHER

Murray Series 62 - 11 Tine Chisel Plow complete (large frame).
Field proven through the toughest seasons
Machines are supplied with all components, including long shank tines, clamps, bottom linkage pins, clips and 75mm reversible points (Standard) etc, to fully complete the size specified.
Adjustable Tine Spacing (standard spacing 300mm) just move mount clamps and / or add additional Tine assemblies if required
Suitable for tractors fitted with Cat II three-point linkage systems. (Top link and pin NOT supplied).
Frame construction 100mm square RHS, underframe clearance 630mm (24), Rank spacing 760mm (30), optional depth control wheels 500mm 100mm approx. Tine steel shank size 75 25mm.
Power requirements; This depends very much on soil type, working depth and conditions; however, allow up to 8 kw (10 hp) (PTO) per tine. ie 9 tines = approx 72 kw (90 hp).
Specifications:
- Tine Spacing: 300mm
- Weight kg: 499
Options:
- One pair of depth control wheel assemblies.
- Recommended in most applications to avoid the Chisel Plow digging in.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 11 TINE RIGID CHISEL PLOW COMPLETE (LARGE FRAME)

ID = 10 mm
OD = 3/4 "
Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 10MM (ID) FLAT GASKET

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 4130kg
No. of Bearings: 24
No. of axles: 12
Cutting width: 5.71m (18ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 48 PLATE X 24 INCH DISCS - 0977

The Selecta 12V DieselPower transfer units are available from 100L (this model) to 400L capacity.
Tanks are made from a diesel grade polyethylene that are impact resistant and UV stabilised.
Proven and reliable Selecta DieselPower pumps are the heart of this rugged product.
Specifications:
Tank Size (L): 100
Pump Size (L/min): 40
Product Weight (kg): 18
Height / Width / Length (mm): 440 / 620 / 800
Features:
- 12V DieselPower pump, 40L/min open flow
- Strong double walled lockable pump cover protects the pump and tank breather from any unwanted access. (Padlock included)
- Suction foot screen filter on internal suction line
- Lockable filling cap (2 keys)
- High quality auto shut-off trigger
- 4m of 3/4" delivery hose with swivel & crimped fittings
- 4m wiring harness with alligator clips
- Low profile design for clear rear view from utility
Options:
06792504 - Lockable Filler cap
PF26-X3 - Digital Litre Counter (Customer Fitment)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 100L DISEL POWER TRANSFER UNIT

Find Farm Machinery For Sale. Browse 7667 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 6MM SCALLOP DISCS - 0863, SUIT 75-165HP

MARCHANT ENGINEERING PTY LTD 1.8MM CLIP GUN - AIR DRIVEN

FIELDQUIP TWOSE 5 - 6.7M REACH MOWER INC FLAIL HEAD (MIN 65HP)

SILVAN 1.05M PAK BOOM (2M SPRAY WIDTH)

CELLI 3.6M (220-350HP) ALCE-P RIPPER / SUBSOILER

POLYMASTER 450L SWEEP TROUGH (25MM VALVE)

SILVAN WIRELESS MAGNETIC DRIVEWAY SENSOR

CELLI 2.6M (100-120HP) JUPITER EXTRA HEAVY DUTY SIDE-SHIFT MULCHER

MURRAY 11 TINE RIGID CHISEL PLOW COMPLETE (LARGE FRAME)

SILVAN 10MM (ID) FLAT GASKET

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 48 PLATE X 24 INCH DISCS - 0977

SILVAN 100L DISEL POWER TRANSFER UNIT

Farm Supplies Machinery & Equipment

Dealer Address