Farm Supplies Machinery & Equipment

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions.
The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3830kg
No. of Bearings: 16
No. of axles: 8
Cutting width: 4.8m (15ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 40 PLATE X 26 INCH DISCS - 0963

Designed for extremely tough conditions and is one of the strongest linkage disc ploughs available. Heavy weighted gangs provide excellent digging ability.
Features:
Each machine takes approximately 2-3HP per disc to pull, depending on conditions.
Prong scrapers are also available for heavy clay soil.
Twin spring loaded pressure screws prevent damage in rocky or undulating conditions.
Easy gang angle adjustment.
Fitted with hard wearing European Bellota Boron discs at 9 inch spacing. Available in 22x5mm(or optional 24x5mm sizes).
Cat 1 & 2 linkage.
28mm square high tensile axles.
Greaseable flanged disc bearings with excellent sealing to exclude contaminants.
Solid cast spools, individually machined, provide all the weight in the gangs rather than in the frame (which can add load onto the bearings.
Specifications:
Disc Size 22inch dia, 5mm thick, Scallop Disc
Approx Weight- 910kg
No. Bearings 8
No. Axles 4
Cutting Width 2.5m(8ft 3inch)
Options:
0949 Optional Scrapers suit 22 plate GM40.
0953 Optional Furrow filler (not sold separately).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS GM40 22 PLATE HEAVY DUTY OFFSET DISCS - 0812, 2-3HP PER DISC

Linkage turbomiser 400 litre sprayer with a 140 L/min centrifugal pump and a 420mm fan. Ideal for vineyards and greenhouses. Note: spray head not included
Specifications:
Market: Horticulture. Viticulture.
Tank Size (L): 400
Connection Type: Linkage
Min PTO HP: 25
Pump Size (L/min): 140
Height / Width / Length (mm): 1150 / 1100 / 1000
Product Weight (kg): 207 (dry)
Application: Vineyards, greenhouse
Features:
Pump: CD32 centrifugal pump 140L/min constructed from toughened nylon. Stainless steel shaft & viton/ceramic seal.
Fan Size: P42E: 420 mm dia. turbine fan, 3900 rpm. Power consumed 18 kw / 35HP. P45E: 450mm dia. turbine fan, 4500 rpm. Power consumed 34 kw / 45HP.
Nozzles: Air shear.
Gearbox: Multiplication type through multi-grip, multi-vee belt and pulley, over-run free wheeling hub and oil bath fan housing.
Controls: Two sided electric on/off control with control box mounted in cabin. Rotary plate distribution regulators with 15 settings and manual pressure adjustment.
Frame: Galvanised RHS steel construction, cat II linkage.
Tank: 400L Polytuff impact resistant polyethylene construction, calibrated sight line, non spill lids, hydro chemical mixer in larger basket, lids with basket strainers, seperate in-built 18L fresh water hand wash tank.
Agitation: Bypass and pneumatic
Pressure Gauge: Protected 100mm glycerine gauge fitted at front of sprayer
Filtration: Lid strainer and suction line strainer
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 25PTO HP (P42), 45 PTO HP (P45)
Options:
- Super cannon for P42E (GT42-1)
- Super cannon for P45E (GT45-1)
- Manual turntable for Super Cannon (GT55-4)
- Hydraulic turntable for Super Cannon (GT55-9)
- Double sided diffuser head (5 outlets per side) for P42E (GT40-2)
- Double sided diffuser head (5 outlets per side) for P45E (GT45-2)
- Vineyard head - 4 heads (4x4) for P45E (GT45-11)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 400L P42E LINKAGE TURBOMISER - MIN 25PTO HP (SPRAY HEAD NOT INCLUDED)

Earth tooth (right hand) wear part to suit MT trencher range.
Auger Torque provide a range of wear parts to ensure your trencher is always performing at its optimum efficiency.
All Auger Torque hitches & frames are fabricated in house to the highest standards and with a number of standard hitches & frames on the shelf ready quick delivery.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE EARTH TOOTH (RIGHT HAND) WEAR PART TO SUIT MT TRENCHER RANGE

1.5m Shear Grab (10 tines in base). Made in New Zealand.
Through the combination of the clean cut obtained from the unique serrated knife edge and rounded front design, the implement leaves a sealed pit face, eliminating secondary fermentation. The side walls and closely spaced cranked tines minimise silage/maize loss during transport.
High tensile steel
Robust frame
Powerful rams
Conserving feed with a Rata Silage Shear Grab.
Model (Code) SHG150
Width (m) 1.5m
Weight (kg) 480kg
Capacity (m³) 0.73
Number of Tines 10
Min Tractor HP 100
All Rata Silage Shear Grabs feature a serrated knife cutting edge. Serrated teeth cut the silage faster, stay sharper for longer, serrated teeth along with rounded grab face also help keep the stack sealed which prevents secondary fermentation.
Hydraulic rams on Grabs are large and powerful to cut through the most dense silage stacks. Models under 2.1m wide have 2 Rams. Models 2.1m wide and above come with 3 hydraulic rams.
Rata Grabs are designed and built heavy duty to cope with a long, hard working life. Heavy steel plate, bushes and bosses ensure maximum strength and support. Particularly around pivot points and high stress load areas.
Hydraulic hoses are routed to keep away from the working area of the Shear Grab. This ensures they are kept out of harms way whilst remaining easy to access.
An optional bucket insert is available upon request. This effectively turns the shear grab into a bucket shear grab for use on fine materials and feeds.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 1.5M SHEAR GRAB

Machine Suitability:
- Skid Steer Loaders & Excavators (3 - 5 Tonne)
Features:
- Oil Pressure Range: 180-240 bar
- Oil Flow Range: 45-80 lpm
- Unit Width: 850mm
- Unit Height: 736mm
- Unit Length: 1800mm
Please select the frame / hitch and chain suited to your machine and application (listed below in options).
All MT trenchers include Flat Face Couplers and Hydraulic Hoses.
Universal Frame Options (to suit MT range):
- Universal skid steer frame
- Universal mini loader frame
Hitches Options (to suit MT range):
- 30mm PIN
- 35mm PIN
- 38mm PIN
- 40mm PIN
- 45mm PIN
- 50mm PIN
900mm Trenching Depth Chains (to suit MT range):
- 100mm x 900mm - Earth
- 100mm x 900mm - Combination
- 100mm x 900mm - Tungsten
- 150mm x 900mm - Earth
- 150mm x 900mm - Combination
- 150mm x 900mm - Tungsten
- 200mm x 900mm - Earth
- 200mm x 900mm - Combination
- 200mm x 900mm - Tungsten
- 250mm x 900mm - Earth
- 250mm x 900mm - Combination
- 250mm x 900mm - Tungsten
- 300mm x 900mm - Earth
- 300mm x 900mm - Combination
- 300mm x 900mm - Tungsten
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE MT900 TRENCHER SUIT EXCAVATORS / MINI LOADERS

Silvan 102 General Purpose Slasher - 1.5m (5ft)
Suit 30-40 HP. 102RS5
Ideally suited to clearing paddocks, fields and private roadsides where general cutting is required with a low HP tractor.
Features:
- Construction: 3mm top deck plate, downfolds front and rear, steel understructure.
- Gearbox: 40HP, 540RPM, 1:1.93 ratio.
- PTO Shaft Rating: 40HP, series 4 with integral clutch.
- Head Stock: Collapsible floating hitch.
- Clutch: Adjustable friction clutch with 2 x 150mm (6in) clutch plates.
- Finish: Premium quality powder coating.
- Skids: Adjustable from 50 90mm cutting height.
- Blades: 3 leaf rotor bar with hardened bushes and 2 Boron step down blades.
- Mounting: Cat I TPL attachment with offset or centre mount.
- Instructions: Operators manual and holder supplied.
- Safety Guards: Front & rear rubber guards.
Specifications:
- Market: Turf, Ag Lifestyle
- Connection Type: Linkage
- Min PTO HP: 30-40 HP
- Working Width (mm): 1500
- Product Weight (kg): 258
Options:
- Height Control Wheel
- Over-run Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1.5M 102 GENERAL PURPOSE SLASHER (SUIT 30-40HP)

2.0m Silage Grab (11 tines in base). Made in New Zealand.
Rata Silage Grabs are a multi-task attachment built to perform on your Tractor front end loader, Telehandler (2.2m sizes or larger) or Skid Steer.
With the ability of a fork & the versatility of a grab, this attachment makes bulk silage and bale handling work easy.
Being manufactured from high tensile steel makes it the strongest Silage Grab of its type available on the Australian & New Zealand market.
Rata Silage Grabs are ideal for high volume silage handling. The Grab has been the popular choice on NZ farms for many years due to its high quality build & ability to secure large amounts of silage & leave the stack or pit face clean.
All Rata Silage Grabs feature powerful hydraulic rams that bite through any silage stack and securely clamp the feed, All grabs have x2 rams apart from the ASG120 (1.2m model) which has a single centre mounted ram.
Tines are high quality and manufactured from silicium spring steel by a renowned German manufacturer, these tines are also supported with tapered conus bushes that provide extra support when under load.
With a wide opening width of 1510mm this grab can easily handle large quantities of silage or large bales. The dimension is taken from the tip of the base tine directly to the tip of the top tine.
The pin geometry has been designed to provide maximum pressure possible at every point in the open and close arc. This makes it easier to use with high clamping pressure available at all times.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 2.0M SILAGE GRAB

These mounted disc mowers are professional machines, agile in use and made to ensure a high productivity and long life. They are all equipped with the Enocut cutting bar which allows a quick and clean cut. The DM series, with lateral oscillating cutting bars, ensures a uniform cut on all types of terrain.
Rear-mounted disc mower equipped with hydraulic lift, safety release to protect the bar from any obstacles, over running Cardan shaft, protection cover and swath disc.
High quality steel Enocut cutting bar, a system totally manufactured in-house by Enorossi.
Standard Equipment:
- Rotation of discs In pairs combined
- Safety release
- Lightening Spring
- Right swath disc
- Cardan PTO shaft
Working Width = 2,050 mm
Tansport Width = 1,260 mm
Weight = 460 kg
Discs = 5
Blades = 10
Required HP = 50 hp
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ENOROSSI 2.05M DISC (HAY) MOWER (MIN 50-60 HP)

The Nobili mulcher TRP 95, 120, 145, 175 are provided with pick-up is a mounted machine that fits on the three-point linkage of the rear hydraulic lift of the tractor. Through the pick-up device the machine picks up the pruning remains, lifting and carrying them inside the mulching chamber where they are cut and then put down on the ground through calibrated holes of the frame. In working position it is supported by steering wheels or by the roller.
The 8 rows rotor, provided with hammers, ensures a more regular rotation, less vibrations, low power requirement and high working speeds in every condition. The double output gearbox with built in overrunning clutch ensures sturdiness and reliability.
The mulcher has been constructed in compliance with EC Regulations.
Specifications:
Tractor Connection: Linkage (Cat II, floating top link)
Connecting position: Rear
Engine speed rpm: 540
Tractor horse power HP: 60-120, KW: 44-88
Cast Hammer Blade: 12
Working Width: 956mm
Overall Width: 1217mm
Weight: 625kg
Features:
Suggested Use: Mulcher suited to stony ground with pick up front for green pruning's to 100mm.
Construction: High profile, adjustable tailboard, two mulching bars and filter grid.
Control: Fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Skids.
Options:
- Hydraulic pickup
- Roller
- Front wheels
- Reversible model (TRP175 only)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI 95CM TRP MULCHER (SUIT 60-150HP)

Made Tough. Made Strong
Looking for a heavy duty gate kit for your cattle yard or large gate? Our heavy duty bolt-through timber post gate kits can handle anything thrown their way.
This kit features a heavy duty 20mm thread. That's 25% more steel than a tradition bolt-through timber post gate kits. Whether you have big livestock, big gates, or just like the best, this is the gate kit for you.
All of our gate kits are made from hot dipped galvanised steel to ensure strong and long lasting kit.
Adjustable Nylon Gudgeon
Do you want more control over the angle of your gate and how far away it sits from your fence post? Our heavy duty gudgeon is fully adjustable. The top strap is also fitted with an adjustable keeper plate to keep your gate locked in nice and tight without any unwanted movement.
The nylon gudgeon itself is non-tapered except for the slight tapering at the top so you can easily push your gate on. Within the gudgeon is a metal pin for added strength.
It has been designed to be taller than most other gudgeons for extra security. The longer length means that it is harder to pull the bottom of the gate off.
And if you are worried about UV damage, the nylon gudgeon is designed to fit fully inside the gate where the sun cant reach it.
Price quoted is for one set which includes:
* A heavy-duty bottom gudgeon with a 25NB nylon bush.
* Heavy-duty top strap.
* A removable keeper plate.
* Four nuts and four washers.
* Your choice of latch.

Discounts apply for bulk kit purchases of 10+, 25+, 50+ or 100+.
Features:
- Perfect for heavy livestock
- Long lasting
- Fully adjustable
Specifications suit:
- 25NB gate
- <400mm post
- 20mm thread
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL HEAVY DUTY BOLT-THRU TIMBER POST HINGE SET -FG3400

Heavy duty , high clearance folding rotary hoe (Spike & Anti-pan rotor options available, suitable for tractors up to 280 hp.
Specifications:
Actual Width: 565cm
Working Width: 541cm
Required HP: 220-280hp
Weight: Cage roller - 3370kg, Packer roller - 3670kg
No of Blades: 126
Features:
Rotary hoe
Rated up to 280 hp
Hydraulic folding with safety locks and 2.5m transport width
80 x 8mm 'L' or 'C' shaped blades(options for 10mm blades,spikes rotor or antispan rotor)
Single blade flanges (options for double welded flanges)
14mm blade bolts
1000 rpm
Unique central split gearbox system for high horsepower loading and efficient torque distribution
Two speed side gearboxes with available gear speeds of: 208,230,260,284,310,340,375,410
2 piece split tailgates with dual manual angle adjustment
High clearance under hood
Gear side drive
Category three hitch, suitable for quick hitch (floating or fixed bottom links)
Central loosening tine for 5mm bed gap
250mm working depth
Cam clutches on side driveshafts
Rear light frame with LED lights and AU Hazard panels
1 3/4 20 spline heavy duty front driveshaft
2 year warranty
Accessories:
Oil cooler with reservoir on central gearbox
Oil cooler with reservoir on side gearboxes
Front sod breaking discs (pair)
Track eradicators (set of 4)
'C' (speed) blades in lieu of 'L' blades
Hydraulic tailgate adjustment
Options in Lieu with Standard:
Rotor Options
Double flange rotor (c/w 10mm blades)
Spike rotor spike (30x30x195)
Anti-pan rotor (10mm straight blade)
Roller Options
Cage roller (500mm diameter) with hydraulic adjustment
Packer roller (555mm diameter) with hydraulic adjustment
Models:
TIGER 280P-450 441cm Working Width 180-280 HP 102 BLADES
TIGER 280P-500 491cm Working Width 200-280 HP 114 BLADES
TIGER 280P-550 541cm Working Width 220-280 HP 126 BLADES
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 5.41M (220-280 HP) TIGER FOLDING ROTARY HOE

Find Farm Machinery For Sale. Browse 7661 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 40 PLATE X 26 INCH DISCS - 0963

JOHN BERENDS GM40 22 PLATE HEAVY DUTY OFFSET DISCS - 0812, 2-3HP PER DISC

SILVAN 400L P42E LINKAGE TURBOMISER - MIN 25PTO HP (SPRAY HEAD NOT INCLUDED)

AUGER TORQUE EARTH TOOTH (RIGHT HAND) WEAR PART TO SUIT MT TRENCHER RANGE

RATA 1.5M SHEAR GRAB

AUGER TORQUE MT900 TRENCHER SUIT EXCAVATORS / MINI LOADERS

SILVAN 1.5M 102 GENERAL PURPOSE SLASHER (SUIT 30-40HP)

RATA 2.0M SILAGE GRAB

ENOROSSI 2.05M DISC (HAY) MOWER (MIN 50-60 HP)

NOBILI 95CM TRP MULCHER (SUIT 60-150HP)

ROTECH RURAL HEAVY DUTY BOLT-THRU TIMBER POST HINGE SET -FG3400

CELLI 5.41M (220-280 HP) TIGER FOLDING ROTARY HOE

Farm Supplies Machinery & Equipment

Dealer Address