Farm Supplies Machinery & Equipment

The BT80 Daken solar energiser is a very large system packaged ready to go just requires a battery for remote permanent fencing applications.
Suitable for multi wire fences up to 80km
Daken solar powered energisers are ideal for remote locations or where mains power is not readily accessible. Ideal for strip grazing, temporary fencing and for permanent placement.
The system incorporates a BT80 energiser, quality crystalline 40 Watt Solar Panel, solar regulator in one convenient package.
It is also Bi Polar ready for difficult to control animals and more arid areas.
The BT50 solar energiser mounts directly to a steel post or a water pipe for strength and rigidity.
Features:
- Range up to 80km multi wire fence
- Power 8 Stored Joules
- Peak Output Voltage 9.0KV
- Bi-Polar function
- Diagnostic Centre with, energiser OK, Overload, low battery
- Heavy Duty battery connections
- 3 Year Factory Warranty
- The BT80 requires at least a 60Ah battery (preferably 120Ah).
Designed, Assembled, Tested and Serviced in Australia
Dakenag Solar Powerd Energisers "Harness the Power of the sun". Solar powered electric fence systems are ideal for remote locations or where mains power is not readily accessible.
Dakenag Battery Powered Energisers are matched to a solar panel that will provide the correct power. After many years of experience we only use high quality crystalline solar modules due to their performance and longevity.
Daken solar powered energisers are ideal for remote locations or where mains power is not readily accessible. Ideal for strip grazing, temporary fencing and for permanent placement.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

DAKEN BT80 SOLAR ASSISTED ENERGISER FOR ELECTRIC FENCE - 70491D

Easy to install latches that wont shake loose.
Need a solid latch for your ute or trailer that wont rattle loose? Our anti-loose latches wont come undone, unlike other latches which can pop open as they wear and get old.
Ever been driven down a corrugated road only to have your old latches loosen and pop open due to wear and tear? Our anti-loose latches will stay secure no matter how old they are.
Our zinc plated anti-loose latches are made from quality steel to ensure a long lasting secure latch.
Their design allows you to shut your tail gate, spin the locking mechanism which will drop down and ensure your tail gate remains shut and secure. When in the locked position, you can also use a padlock to ensure that the latch cant be opened without a key.
Secure made easy.
Dont have your latches loosen and pop open again!
Price quoted is for one latch.
Discounts apply for bulk kit purchases of 10+ & 20+
Contact dealer for bulk pricing.
Specifications:
- 12mm pin
- 91mm open length
- 20mm latch width
Features:
- Easy to install
- Secure & long lasting
- Zinc plated
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL 12MM ANTI LOOSE LATCH WELD-ON - ALWL12

The Grow-Master aerator can turn your tired, life-less soil into productive, high yielding pastures. This versatile implement will aerate, cultivate and renovate your soils .
Specially designed tines shatter the compact ground, increasing the absorption of water and air which in turn encourages root growth. The tines have a slight twist in them which cracks the ground in a sideways and downwards motion. This allows water, air and nutrients to move readily through the soil profile making them more available for plant roots.
The grow-master is fitted with double rollers which are angled in opposite directions. This reduces sideway drag on the tractor when ground engaging. Each roller can be adjusted for various degrees of angle from 2.5 to a maximum of 10 (four positions).
The maximum offset position is the most aggressive and is most often used for cultivation and for over-sowing new pasture seed. Ballast weight added to the frame will ensure that the tines are buried down to the hub.
Horsepower requirement is quite low with a minimum of only 35Hp required for the 2m unit. A tow hook is mounted on the back for dragging pasture harrows. 2 bolt gang adjustable to alter rotor angle.
Large floor plate deck for carrying ballast (weight) 100x100x6mm RHS Perimeter frame. Heavy Duty 2 triple sealed bearings. Double rollers allow machine to be angle for more aggressive cultivation.
Easy adjust mounting stands. Solid 75mm rotor. Roller is fitted with the same 2 heavy duty bearings used on the Berends Rotary Drain digger for over 30 years. The patented Shatter tines are 8 long and have a unique angle providing a much superior finish to conventional straight tines.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GROWMASTER 1800 AERATORS - SINGLE ROTOR - 0166

Quality European made product, the Agromaster AFS Field Sprayer is a tractor mounted sprayer developed to meet the different requirements of plant protection treatments. They are extremely versatile and suitable to operate with open field cultivations to spray and distribute herbicides among plant rows.
The availability of spray booms (6m, 8m, 10m or 12m) together with different equipment options allow our sprayers to suit the requirements of any user.
Specifications: AFS-400
Capacity: 400L
Construction: Poly Tank with Galvanised Frame
Total Length: 1380 mm
Total Width: 900 mm
Total Height: 1200 mm
Litres Per Minute: 71
Pump: C-71
Handwash Tank: Yes
PTO Shaft: Included
Additional Hose, Reel & Gun Options
Galvanised Reel, 20.0M Hose & Spray Gun
Galvanised Reel, 30.0M Hose & Spray Gun
Other OPTIONAL Extras
Sectional Control
Electric In Cab Controls
Foam Marker(s)
Nozzle Protectors
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGROMASTER AFS-400 : 3 POINT LINKAGE - 400 LITRE INC 6M BOOM & 30M HOSE + REEL

Strong, Low Profile Gate Pin.
Looking for an easy way to install a strong bottom pin for your gate? Our galvanised long plate gudgeons allow you to secure your gate lower to the ground.
Our steel long plated gudgeons suit most popular farm gate sizes. It can be welded or screwed on to the bottom of your post, ready for you to sit your gate on top. The backing plate is positioned behind the pin.
This enables you to sit your gate closer to the ground. The screws will also be position behind the gate, making it difficult to access (thus more secure) once the gate is on.
Paired with a top saddle, you can expect a smooth gate swing.
Price quoted is for one pin.
Discounts apply for bulk purchases of 10+
Specifications:
- 25NB gate
- 27mm pin
- Galvanised
Features:
- Strong
- Weld on
- Screw on
- Long lasting
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL LONG PLATE GUDGEON WELD/SCREW-ON 25NB - WOG25L

The rigid chisel plough is used in a similar fashion to the stump jump as a primary cultivator.
The rigid tine is harder to pull as it has not got the jack hammering effect of the stump jump tine. It should also be used in country which is known to be clean, as the tine is clamped onto the frame and will only shear the clamp bolts under load.
The tines are extremely strong for this reason, using the same tines as the stump jump plough. The machine is ideal for lighter sandy soils where penetration and draft are not a problem.
Features:
5 Tines at 12 adjustable spacings.
Heavy duty 100x100x6mm frame.
Overall width of the machine is 9 wider than the cut width ie 5 tine is 5 9, 7 tine is 79 and so on.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Available in 5, 7, 9 and 11 tine sizes with tines at 12 adjustable spacings.
Horsepower requirements vary widely but 10 HP per tine is a rough guide.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18).
Options:
0200 Depth Wheels (Pair Holden)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 5'9" (1.75M) - 0182

The Double Side Shift operates outside the wheel line of the tractor, after extending the centre-line of the hammer 1.4m off the centre-line of the tractor. It's easy to operate and ensures efficient and fast work that can be performed with great accuracy.
Allows mounting of the Post Sett sideways, with respect to the tractor. The tractor can then be driven straight along one side of the post line with the Post Sett retracted out of the way of posts and wires.
The Post Sett is moved hydraulically to its extended position completely clear of the tractor wheels for fast and accurate inline setting.
After setting the post, the unit is quickly and safely retracted inside the wheel track of the tractor.
Control for the Double Side Shift action is mounted on the Post Sett control panel, making operation a breeze.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUNRO REAR MOUNTED HYDRAULIC DOUBLE SIDE SHIFT (ONLY) TO SUIT MULTISETT / TELESETT/ AUTODRIVER

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 4130kg
No. of Bearings: 24
No. of axles: 12
Cutting width: 5.71m (18ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 48 PLATE X 24 INCH DISCS - 0977

Linkage 400L Superpak sprayer with 58 L/min pump and 6m hydraulic boom. Ideal for pasture spraying.
Specifications:
Market: Dairy & Livestock
Tank Size (L): 400
Connection Type: Linkage
Pump Size (L/min): 58
Height / Width / Length (mm): 2000 / 2067 / 1050
Product Weight (kg): 150
Application: Pasture spraying
Features:
Pump: Silvan self-priming oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body with raised pump mount. BP60/20: 58 L/min. capacity 2000kPa pressure.
Boom: Hydraulic boom: 6m independent hydraulic fold boom (requires two sets of tractor remotes) with stainless steel spray lines, non-drip nozzle holders, fully galvanised frame, nozzle protection and spring loaded safety break back.
Nozzles: Air induction nozzles with strainer in bayonet fit non-drip nozzle holders at 50cm spacings.
Controls: 3 outlet manual control valve with pressure regulator. Mounted forward for easy access.
Tank: Low profile, 400/600/800L polytuff impact resistant polyethylene construction, external sightline with floating ball and non-spill offset screw-down lid with single breather. 15L fresh water tank with screw down lid and on/off tap. 4L toolbox with polyethylene lid.
Frame: Fully galvanised steel, cat I & II linkage on 400L, cat II linkage on 600L.
Agitation: Bypass agitation.
Pressure Gauge: 0-25 Bar dual stage glycerine filled gauge.
Filtration: Lid strainer, suction line strainer with stop valve fitted at side of tank to enable easy filter maintenance and nozzle cup strainers.
PTO Driveshaft: Quality driveshaft with quick release pins & safety cover.
Options:
- 14L foam sprayer (single side)
- 16L foam sprayer (double side)
- Electric on/off control 3 section
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 400L (6M HYDRAULIC FOLD BOOM) SUPERPAK LINKAGE SPRAYER

Model:
FA804 6ft Toolbar, heavy duty headstock, 2 x 20 in disc hillers, clamps and wedges
Other bed maker assemblies and components also available.
Farm Aid disc hillers are entirely Australian products. Designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction. They are built to serve and built to last.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID BED MAKER ASSEMBLY (HEAVY DUTY) WITH 20IN DISC HILLERS - FARM AID - FA804

Series 08 - 2.59m Stump Jump Harrow System with Standard 4 point pull drawbar - Complete Set.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and 4 Point Pull Drawbar.
8103 - 3 Section with bar 2.59m (8ft 6in).
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 2.59m (8ft 6in)
- Weight 146kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 2.59M STUMP JUMP HARROW WITH STD 4 POINT PULL DRAWBAR COMPLETE SET- SERIES 08

Series 38 Manual winch folding wing frame with 5 section folding S08 Stump Jump Harrow. 4.31m coverage. Transport width: 3.6m.
Please note that 3 point linkage pins are not supplied.
Murray Series 38 Folding Harrow Frames provide a solution to the transportation of multiple Harrow sections.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Series 38 Folding Harrow Frames are supplied complete with centre section, wing attachments and all rings and links to suit your harrow type and size.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 4.31M MANUAL FOLDING FRAME STUMP JUMP HARROW

Find Farm Machinery For Sale. Browse 7607 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

DAKEN BT80 SOLAR ASSISTED ENERGISER FOR ELECTRIC FENCE - 70491D

ROTECH RURAL 12MM ANTI LOOSE LATCH WELD-ON - ALWL12

JOHN BERENDS GROWMASTER 1800 AERATORS - SINGLE ROTOR - 0166

AGROMASTER AFS-400 : 3 POINT LINKAGE - 400 LITRE INC 6M BOOM & 30M HOSE + REEL

ROTECH RURAL LONG PLATE GUDGEON WELD/SCREW-ON 25NB - WOG25L

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 5'9" (1.75M) - 0182

MUNRO REAR MOUNTED HYDRAULIC DOUBLE SIDE SHIFT (ONLY) TO SUIT MULTISETT / TELESETT/ AUTODRIVER

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 48 PLATE X 24 INCH DISCS - 0977

SILVAN 400L (6M HYDRAULIC FOLD BOOM) SUPERPAK LINKAGE SPRAYER

FARM-AID BED MAKER ASSEMBLY (HEAVY DUTY) WITH 20IN DISC HILLERS - FARM AID - FA804

MURRAY 2.59M STUMP JUMP HARROW WITH STD 4 POINT PULL DRAWBAR COMPLETE SET- SERIES 08

MURRAY 4.31M MANUAL FOLDING FRAME STUMP JUMP HARROW

Farm Supplies Machinery & Equipment

Dealer Address