Farm Supplies Machinery & Equipment

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles. Ideal for primary and secondary tillage for 60HP -130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1725kg
No of bearings: 8
No of axles: 4
Cutting width: 2.5m (8ft 3inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 22 PLATE 5MM DISCS - 0844, SUIT 60-130HP

An excellent addition to your own steel posts & stays. Already have your own posts and stays?
Our fitting kits have all the components you need to build your own end assembly.
Are you looking for a long lasting rust resistant fence straining kit that can take less than 15 minutes to set up? Our fitting kits are simple and very easy to install.
Everything is bolt on. No need to carry around your welder or drill. All you need is something to tighten the nuts and bolts.
The design of our Twist Tight Stay Connectors means you can run your end assemble at any angle or pair it with corner kit.
Our unique design incorporates a cable instead of a tension rod. It is a lot quicker to install just drop the loop over your post, or slip knot it if you have existing wire installed and run the tension cable to your footplate. No drilling required.
All components are either stainless steel or hot dipped galvanised to ensure a long lasting end assembly.
Be careful of other alternatives that say they are galvanised (when really, they aren't).
Price quoted is for one kit. Kit includes...
Cap, Post & Stay Connector, Footplate, & Tension Cable.
Discounts apply for bulk kit purchases of 5+, 50+ or 120+.
Features:
- Fast install
- Strong & reliable
- Galvanised
- Bolt-on
- Any angle
- Easy to store
Specifications:
- 80NB (89mm O.D) Post
- 40NB (48mm O.D) Stay
- Extra light stay section
- 2.3mm Stay wall thickness
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL EXTRA LIGHT FITTING KITS (BOLT-ON COMPONENTS. NO PIPE INC) - 80NB X 40NB - SSFK8040

Specifications are shown in images.
Auger Torque Aluminium Ramps with capacity ranging from 1.5 to 8 tonnes.
With carrying capacities ranging from 1.5 to 8 tonnes, our ramps are over-engineered to ensure they can safely accept steel and rubber tracks as well as pneumatic tyres. This means you no longer need to have individual ramps to cope with various means of traction.
We use only the highest-grade alloy and unlike other companies we dont skimp on quality, so when other ramps start to wear out, ours will still be going strong.
All our ramps incorporate a design feature that prevents bottoming out when loading or unloading and all ramps are supplied with forged locking pins to ensure safe and secure attachment to the loading plate.
Features:
- Carrying capacity from 1.5 to 8 Tonnes
- Versatile and flexible
- Suitable for Steel and rubber tracks as well as pneumatic tyres
- Highest grade alloy
- Multiple safety features
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE 8 TONNE (3.5M) ALUMINIUM RAMP

Note: This model does not include a crumbler, however, it is available as an option. The second picture of this listing shows the cultivator with a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 20
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
2m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 2M S-TINE (20 TINES) STANDARD CULTIVATOR - MIN 40HP

The TBE Series mulchers are heavy duty offset machines with parallelogram arm ideal for council and contractor use in maintaining roadsides, parks and gardens. The TBE has a double skin and rounded Hardox steel skids for increased durability. Height control is maintained by a roller with removable ends for servicing.
For grass and green prunings up to 50mm diameter. Low profile body, double skin & no opening tailboard. PTO drive shaft with durable safety cover, heavy duty oil bath gearbox, taper locked pulleys and electronically balanced rotor.
Hydraulic swing arm offset with spring loaded break away. 65 degrees below horizontal to 90 degrees vertical Inclination adjustment.
Cat. II three point linkage floating top link
Specifications:
Height Control: Roller (standard fitment).
Connection Type: Linkage
Min PTO HP: 100-170 HP
PTO rpm: 540
Rotor rpm: 2205
Hammers: 26
Working Width (mm): 2400
Product Weight (kg): 1030
Dimensions WxDxH (MM): 2572 x 768 x 1222
Options:
Y Blades: 52
Y Blades with Straight: 52Y with 26S
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI TBE OFFSET MULCHERS 2.4M - TBE242/06 - 100-170HP

Murray 2.28m, Series 06 Kinked Spring Tine 3 Rank Harrow System - Medium Duty- Complete Unit - 6015.
The Series 06 is a medium duty Spring Tine Harrow System popular with farmers for levelling operations in conjunction with primary and secondary tillage implements.
Series 06 Harrows employ double spring tines available in Kinked or Straight Tines, both 10mm in diameter. The tine angle is adjustable to suit your field conditions.
3 rank versions are available in three sizes ranging from 1.37m (4ft 6in) to 2.28m (7ft 6in). Murrays also manufacture an extra wide 14in (335mm) Rank Spacing Straight Tine units which seeks to provide superior trash flow handling capabilities.
Manual lifting has been eliminated with harrows able to be folded and travel with the principal implement.
Specificatons:
- 2.28m
- Weight: 121kg
- Tine Spacing for 3 rank models - 75mm (3in)
- Tine diameter is 10mm, Kinked (standard) or Straight Tine (Optional)
- Tine Length 450mm (17 3/4in) approx
- Rank Spacing 235mm (9 1/4in) STD 3 Rank
- 2 Mount Arms per unit
Features:
- Kinked design Tines as standard.
- Straight design Tines optional.
- This Harrow is designed to fit on to the rear bar of scarifiers, chisel plows, cultivators etc.
- Adjustable Tine angle.
Optional:
- Straight Tines
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 2.28M KINKED SPRING TINE 3 RANK HARROW MEDIUM DUTY COMPLETE UNIT - SERIES 06

Long lasting & strong. Looking for some strong galvanised steel fence posts? Our drivable steel posts are perfect for the job.
Price quoted is for one post.
Discounts apply for bulk kit purchases of 10+ or 60+.
Features:
- Easy install
- Termite proof
- Fire resistant
- Galvanised
Specifications:
- 100NB (114mm O.D) post
- 4.5mm post wall thickness
- 2400mm (8') post length
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL DRIVABLE ROUND STEEL POST 100NB X 2400MM- RSP1004.5

Honda Post Driver 80
The Powertech Honda Post Driver 80 is one of the lightest post drivers on the market, weighing 14kg and perfect for driving star pickets and small posts into the ground. Powered by the Honda GX35 4-stroke engine, it makes hammering in posts a breeze!
The kit includes 4 different post sleeves and inserts to help cover the large variety of star pickets and fencing posts on the market today. We also have a selection of other adaptors to suit the most common applications so please give us a call if you are unsure whether what is provided in the kit will suit your needs.
Powered by sa GENUINE HONDA 4-stroke engine - Honda's GX35 is the world's first 360 degree inclinable 4-stroke engine, this model offers high output and outstanding performance. Capable of performing in demanding commercial and rental applications with excellent fuel efficiency and reliability. The OHC design driven by a maintenance-free and low noise timing belt makes this engine compact and light weight.
Specifications
Capable of driving posts from 25 mm-80 mm.
Powered by the Honda GX35 4-Stroke engine.
Max power: 1kw@7000 rpm 1.2Nm@5500 rpm
Impact energy: 15-45 J
Unit weight: 14 kg
360-degree inclinable operation.
Comes with post sleeves 45mm, 55mm, 73mm and 80mm.
Perfect for driving planting stakes, star pickets and a range of fencing posts from steel to wooden.
Internal spring-mounted handles for vibration absorption.
Durable carry case and tool kit included.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POWERTECH HONDA GX35 POST DRIVER

Swivel end brass nut to suit 100 and fire fighting 36 metres hose reel.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RAPID SPRAY SWIVEL END BRASS NUT FOR HOSE REEL

Made in Australia
Features:
- Australian-made extreme duty design
- Strongest Rake Bucket in its class
- 115 mm spacings for increased sifting ability
- High tensile 40 x 40 mm solid bar tynes
- Ideal for clearing scrub and digging out rocks
Dimensions:
Suits: 80 - 180 hp
Weight = 555 kg
Tynes = 40 mm x 40 mm
Tyne Spacing's = 115 mm
Volume = 0.57 m3
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH POWER RAKE (2.4M)

2.0m Silage Grab (11 tines in base). Made in New Zealand.
Rata Silage Grabs are a multi-task attachment built to perform on your Tractor front end loader, Telehandler (2.2m sizes or larger) or Skid Steer.
With the ability of a fork & the versatility of a grab, this attachment makes bulk silage and bale handling work easy.
Being manufactured from high tensile steel makes it the strongest Silage Grab of its type available on the Australian & New Zealand market.
Rata Silage Grabs are ideal for high volume silage handling. The Grab has been the popular choice on NZ farms for many years due to its high quality build & ability to secure large amounts of silage & leave the stack or pit face clean.
All Rata Silage Grabs feature powerful hydraulic rams that bite through any silage stack and securely clamp the feed, All grabs have x2 rams apart from the ASG120 (1.2m model) which has a single centre mounted ram.
Tines are high quality and manufactured from silicium spring steel by a renowned German manufacturer, these tines are also supported with tapered conus bushes that provide extra support when under load.
With a wide opening width of 1510mm this grab can easily handle large quantities of silage or large bales. The dimension is taken from the tip of the base tine directly to the tip of the top tine.
The pin geometry has been designed to provide maximum pressure possible at every point in the open and close arc. This makes it easier to use with high clamping pressure available at all times.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 2.0M SILAGE GRAB

Easy To Latch. Long Lasting. Looking for a quick and simple spring hook?
Our swivel eye spring hooks are perfect for dog chains or a simple DIY gate latch.
Our swivel eye spring hooks are a simple way to quickly latch your chain or wire rope. Our hooks are available with nickel plating or in stainless steel for longer lasting and smoother action.
The spring hook comes with a swivel to help with anti-twisting and allow for more movement.
Price quoted is for one item.
Discounts apply for bulk kit purchases of 2+.
Specifications:
- 19mm internal eye width
- 93mm height
- 12mm hook opening
- Stainless steel
Features:
- Easy to use
- Anti-twist
- Rust resistant
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL 19MM SWIVEL EYE SPRING HOOKS (STAINLESS STEEL) - SESH19SS

Find Farm Machinery For Sale in Coopers Plains. Browse 7604 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM75 HD TRAILING OFFSET 22 PLATE 5MM DISCS - 0844, SUIT 60-130HP

ROTECH RURAL EXTRA LIGHT FITTING KITS (BOLT-ON COMPONENTS. NO PIPE INC) - 80NB X 40NB - SSFK8040

AUGER TORQUE 8 TONNE (3.5M) ALUMINIUM RAMP

JOHN BERENDS 2M S-TINE (20 TINES) STANDARD CULTIVATOR - MIN 40HP

NOBILI TBE OFFSET MULCHERS 2.4M - TBE242/06 - 100-170HP

MURRAY 2.28M KINKED SPRING TINE 3 RANK HARROW MEDIUM DUTY COMPLETE UNIT - SERIES 06

ROTECH RURAL DRIVABLE ROUND STEEL POST 100NB X 2400MM- RSP1004.5

POWERTECH HONDA GX35 POST DRIVER

RAPID SPRAY SWIVEL END BRASS NUT FOR HOSE REEL

HIMAC EURO HITCH POWER RAKE (2.4M)

RATA 2.0M SILAGE GRAB

ROTECH RURAL 19MM SWIVEL EYE SPRING HOOKS (STAINLESS STEEL) - SESH19SS

Farm Supplies Machinery & Equipment

Dealer Address