Farm Supplies Machinery & Equipment

Australian made.
Pigtail Electric Fence Tread-in Post for electric fencing.
An investment in electric fencing is an investment in more profitable farming. Its true that electric fencing takes less time, effort and cost than traditional fencing but its as a powerful pasture management tool where it brings most benefit. It gives farmers precise control over feed to allow allocation of pasture and other forages through permanent and temporary sub divisions.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LEMPRET WIRE & SEALANTS PIGTAIL ELECTRIC FENCE TREAD-IN POST (EACH)

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 24inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2190kg
No of bearings: 12
No of axles: 6
Cutting width: 3.2m (10ft 6inch)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM80 HD TRAILING OFFSET 28 PLATE 24 INCH 5MM SCALLOP DISCS - 0852

- Easily Uplifts Wood Posts & Steel Posts
- Can be attached to digger buckets
- Heavy Duty Tested 10mm Passivated Chain
- Hook onto machinery for easy post removal
- Chain length 1M (39")
The Post Puller Chain (1 metre) is a durable, heavy-duty chain designed for removing star pickets, fence post, sign posts, and similar fixtures with ease.
Crafted from high-strength steel, it features hardened links for maximum durability and grip. Ideal for agricultural, fencing, and construction applications, the Post Puller Chain provides a reliable, efficient and safe solution for quick post extraction.
Also available is a 2m version.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POWERTECH 1M POST PULLER CHAIN

Features a galvanised metal hopper suited to small and medium spreading applications.
Construction: The galvanised hopper is manufactured from a single piece of spun, seamless steel. The support frame is constructed of pressed and tubular steel.
Driveline: PTO drive shaft with safety cover - grease packed single speed gearbox with cast aluminium housing, 1:1 ratio - vertical output shaft to spinner and agitator.
Height Control: One manual control lever is calibrated for quantity of application and a second control lever offers three settings for spreading pattern, left, right and full.
Suggested Use: Suitable for small to medium spreading applications and are capable of spreading a wide variety of products including fertiliser and seed.
Features:
Market: Dairy & Livestock. Turf. Ag Lifestyle
Connection Type: 3PL Linkage
Product Weight (kg): 67
Height / Width / Length (mm): 1180 / 1190 / 1180
Capacity: 345 litres
Width of Throw: 6-18m
Options:
- PAX26RLG Side throw conveyor
- PAX20RLG Articulated Agitator
All prices include GST. Please allow extra for freight.
Contact Farm Supplies today for sales or more information!
Delivery available Australia Wide.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 345L SX SERIES LINKAGE SPREADER

Simple & Strong. Need an auger for your wooden fence posts? Our hard wood augers make installing your latches a breeze.
Our augers are perfect for drilling clean holes through your timber posts. We have a wide variety of sizes for a multitude of uses:
Our smaller sizes are excellent for drilling holes for latches and for holes to run wire through.
The 18mm and 20mm augers provide a great fit for our gate kits.
We also provide bigger sizes which are better for drilling holes to run barb wire through your posts.
If you are purchasing an auger to install a gate kit, we recommend you use a slightly larger sized auger. For example, if you are getting a 16mm gate kit, get the 18mm auger. If you need to pull the gate kit out in the future the larger hole will make it easier. It will simply slide in and out with minimal hassle.
Important! Use your Auger Correctly. Every brand of wood auger is engineered slightly different. Its critical that the auger is used how the manufacturer intended. There are important features of these augers:
These augers have a coarse thread for faster penetration at low revs (250rpm). Let the auger do the work. All you need to do is hold the drill straight (dont try and push it through the post). If its a big post, pull the auger out occasionally to help remove the wood chips.
Each auger includes a cutting head with obtuse angles. This decreases the frequency between sharpens, minimising your downtime.
Price quoted is for one item only.
Discounts apply for bulk purchases of 5+
Specifications:
- 18mm auger
- 450mm overall length
- 362mm flute length
- 8mm screw
Features:
- Strong
- Simple to use
- Designed to work with our gate kits
- time saving
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL HARDWOOD AUGER 18MMX450MM - HA18450

Bearing for nose roller wear part to suit XHD trencher range.
Auger Torque provide a range of wear parts to ensure your trencher is always performing at its optimum efficiency.
All Auger Torque hitches & frames are fabricated in house to the highest standards and with a number of standard hitches & frames on the shelf ready quick delivery.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE BEARING FOR NOSE ROLLER WEAR PART TO SUIT XHD TRENCHER RANGE

Murray Series 32 16 Disc Harrow - Offset Tandem 1.83m.
The Murray Series 32 Disc Harrow is an excellent choice for soil preparation and breaking up virgin land. Built heavy duty, the tandem disc setup combines rugged capabilities with smart features.
The durable box frame is built in two parts, with a pivot point that is able to be locked providing different working configurations. It supports four gangs of discs two front and two rear. Gang angles can be individually adjusted by way of crank screws to suit different conditions. The angle can be adjusted between 0 and 20 degrees to vary the aggression of cultivation. Disc gangs are mounted on sealed-for-life bearings set in rubber. No greasing is required which minimises unproductive maintenance downtime.
In a standard form the Series 32 is a four gang Disc Harrow for use with light to medium powered tractors. By removing the rear frame section and gangs, the Series 32 becomes a handy two-gang implement for light work. Alternatively, the rear frame section and gangs can be pivoted upwards to provide additional weight for penetration by the leading two gangs in heavier conditions. Under uneven ground conditions, the rear frame section and gangs can be allowed to float over undulations for even cultivation.
The Murray Series 32 Disc Harrow is a three-point linkage mounted implement suitable for Cat II hitches. It is supplied complete with fittings and fasteners including linkage pins and clips. Available in two popular sizes 16 discs covering around 1.83 metres (6ft) and a 20 disc model covering 2.28 metres (7ft 6in) approx.
Under certain conditions Disc Harrows can throw up a furrow between the inner discs. The option of a centre spring tine is available which will maintain a level finished behind the harrow in these situations. Optional sets of blade scrapers are also available to keep discs clean and working efficiently in wet or sticky conditions.
Features:
- Available in 16 Disc or 20 Disc models
- Suitable for Cat II systems
- Adjustable gangs from 0 20 degrees
- Sealed for life bearings
- 559mm (22 inch) scalloped discs
- Removable/ pivot rear frame section
Specifications:
- Coverage (m): 1.83
- Coverage (ftin): 6
- Power Requirement: 35 to 55 hp
- Standard Discs: 22 Scalloped Flatback Discs
- Weight (kg): 520
Optional Equipment:
- Scraper set: 16 Disc- 43kg
- Scraper set: 20 Disc - 54kg
- Spring Tooth Centre Tine assembly (1)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1.83M 16 DISC HARROW - OFFSET TANDEM

Series 39 Hydraulic folding wing frame with 5 section folding S04 Diamond Harrow. 4.83m coverage. Transport width: 3.4m.
Please note that 3 point linkage pins are not supplied.
Murray Series 39 Hydraulic Folding Harrow Frames provide a solution to the transportation of multiple Harrow sections.
Designed to fit Category I or II three-point linkage systems, Murray Series 39 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and hydraulic folded wings.
Murray Series 39 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Series 39 Folding Harrow Frames are supplied complete with centre section, wing attachments and all rings and links to suit your harrow type and size.
Specifications:
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 4.83M HYDRAULIC FOLDING FRAME DIAMOND HARROW

Toyota 4SDK4 side shift trencher frame to suit MT range.
Auger Torque has several hitch & frame options to suit your particular machine, need and application.
All hitches & frames are fabricated in house to the highest standards and with a number of standard hitches & frames on the shelf ready quick delivery.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE TOYOTA 4SDK4 SIDE SHIFT TRENCHER FRAME TO SUIT MT RANGE

Murray 1.37m, Series 06 Straight Spring Tine 3 Rank Extra Wide Spacing Harrow System - Medium Duty- Complete Unit - 6059.
The Series 06 is a medium duty Spring Tine Harrow System popular with farmers for levelling operations in conjunction with primary and secondary tillage implements.
Series 06 Harrows employ double spring tines available in Kinked or Straight Tines, both 10mm in diameter. The tine angle is adjustable to suit your field conditions.
3 rank versions are available in three sizes ranging from 1.37m (4ft 6in) to 2.28m (7ft 6in). Murrays also manufacture an extra wide 14in (335mm) Rank Spacing Straight Tine units which seeks to provide superior trash flow handling capabilities.
Manual lifting has been eliminated with harrows able to be folded and travel with the principal implement.
Specificatons:
- 1.37m
- Weight: 68.5kg
- Tine Spacing - 75mm (3in)
- Tine diameter is 10mm, Straight Tine
- Tine Length 450mm (17ft 3/4in) approx
- Rank Spacing 3555mm (14in) - Extra Wide
- 1 Mount Arm per unit
Features:
- 14inch (355mm) Extra Wide Rank spacing with straight tines.
- Adjustable Tine angle.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1.37M STRAIGHT SPRING TINE 3 RANK EXTRA WIDE SPACING HARROW MEDIUM DUTY COMPLETE UNIT - SERIES 06

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage with 60 -130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1930kg
No of bearings: 8
No of axles: 4
Cutting width: 2.74m (9ft)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

Series 23 - 2.1m Small Acreage Pasture Harrow.
Designed to be operated via UTV, 4WD or ride on Mower.
Specifications:
- One sided tripod sections
- Available in 0.76m (26) depth
- High Carbon 10mm Square Steel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 2.1M SMALL ACREAGE PASTURE HARROW - SERIES 23

Find Farm Machinery For Sale in Coopers Plains. Browse 7615 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

LEMPRET WIRE & SEALANTS PIGTAIL ELECTRIC FENCE TREAD-IN POST (EACH)

JOHN BERENDS RM80 HD TRAILING OFFSET 28 PLATE 24 INCH 5MM SCALLOP DISCS - 0852

POWERTECH 1M POST PULLER CHAIN

SILVAN 345L SX SERIES LINKAGE SPREADER

ROTECH RURAL HARDWOOD AUGER 18MMX450MM - HA18450

AUGER TORQUE BEARING FOR NOSE ROLLER WEAR PART TO SUIT XHD TRENCHER RANGE

MURRAY 1.83M 16 DISC HARROW - OFFSET TANDEM

MURRAY 4.83M HYDRAULIC FOLDING FRAME DIAMOND HARROW

AUGER TORQUE TOYOTA 4SDK4 SIDE SHIFT TRENCHER FRAME TO SUIT MT RANGE

MURRAY 1.37M STRAIGHT SPRING TINE 3 RANK EXTRA WIDE SPACING HARROW MEDIUM DUTY COMPLETE UNIT - SERIES 06

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

MURRAY 2.1M SMALL ACREAGE PASTURE HARROW - SERIES 23

Farm Supplies Machinery & Equipment

Dealer Address