Farm Supplies Machinery & Equipment

The TBE Series mulchers are heavy duty offset machines with parallelogram arm ideal for council and contractor use in maintaining roadsides, parks and gardens. The TBE has a double skin and rounded Hardox steel skids for increased durability. Height control is maintained by a roller with removable ends for servicing.
For grass and green pruning's up to 50mm diameter. Low profile body, double skin & no opening tailboard. PTO drive shaft with durable safety cover, heavy duty oil bath gearbox, taper locked pulleys and electronically balanced rotor.
Hydraulic swing arm offset with spring loaded break away. 65 degrees below horizontal to 90 degrees vertical Inclination adjustment.
Cat. II three point linkage floating top link.
Specifications:
Height Control: Roller (standard fitment).
Connection Type: Linkage
Min PTO HP: 90-150 HP
PTO rpm: 540
Rotor rpm: 2205
Hammers: 24
Working Width (mm): 2200
Product Weight (kg): 980
Dimensions WxDxH (mm): 2423 x 768 x 1222
Options:
Y Blades: 48
Y Blades with Straight: 48Y with 24S
TBE222/06 is available in left or right hand offset.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI TBE OFFSET MULCHERS 2.2M - TBE222/06 - 90-150HP

This Wire Spinner has 5 Wire Retaining Arms which allows for the wire to be pulled out from ANY direction rather than being constricted. The arms serve to stop the wire from jumping up and over the back.
The Blue Jen II Wire Spinner is the second generation of our Blue Jenny Wire Spinner, designed specifically for constant run fencing and higher speed applications with reduced tangles.
A gravity based braking system has allowed us to remove the brake and pickup arms and vary the brake force depending on how much wire is left in the coil. Designed to retro-fit in your existing Module Stackers, and is suitable for wire coils wound in both counter clockwise and clockwise directions.
The one piece design means no additional bits to lose, and there is no need to pull it apart to load it. Just drop the wire in and go. A modified profile and lighter weight means the BJII can be loaded into a Module Stacker by one person.
Designed to be stackable - one on top of the other with a piece of pipe to hold them in place - or you can stack up to 5 in the Module Stackers (available separately).
The base protects the cradle, when the spinner is in the back of the ute, the base frame will stop other items in the back from jamming up against the spinner.
- Shipping weight 21kg.
- Suits Australian wire coils
We recommend the use of high tensile wire, our personal preference is Waratah 2.5mm Tyeasy high tensile wire.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WALTERS FENCING BLUE JEN II WIRE SPINNER

Series 35 Forged Tine Levelling Harrow System (Category L) "Extra Heavy" Harrow Sections including optional drawbar.
4 Rank (Length) Deep Harrow Sections (May be used with seeding combines, air seeders, etc.)
Model:
35003 - 12 Tine (3W x 4L deep) 2.3m wide (min) - this listings price. Heavy Duty drawbar options listed below (2.3m - 5.6m wide options).
Note: Picture shown first is 5 Rank (Length).
Information on the Harrow System:
- If you want to level your land and need a Harrow that will stand up to the demands of todays conditions, Murrays manufacture an Extra Heavy Levelling Harrow. Built from heavier High Carbon Steel, each Tine is specially forged revealing a diamond shape designed to level your ground. Tine spacing remains the same as our standard Series 03 version.
- The Series 35 is suitable for heavier clay type soils and is used after primary or secondary tillage. Available in three and four row widths allowing flexibility to build up Harrow Sections to suit the width of your primary machine. 100% Australian made and owned.
Specifications of the Harrow Sections:
- Tine Spacing 76mm (3in)
- Tine length 190mm (7 1/2in) approx.
- Centre to Centre of Front Hooks 235mm (9 3/4in)
Features:
- Forged Tine ends. Manufactured from 25 x 10mm carbon steel.
Heavy Duty Drawbars (only) options:
3074 - 7ft 7in (10 bar anchors) 9kg
3075 - 8ft 5in (11 bar anchors) 10kg
3076 - 9ft 2in (12 bar anchors) 13kg
3077 - 9ft 11in (13 bar anchors) 14kg
3078 - 10ft 8in (14 bar anchors) 15kg
3079 - 11ft 5in 16 row (15 bar anchors) 17kg
3080 - 12ft 2in (16 bar anchors) 21kg
3081 - 13ft (17 bar anchors) 27kg
3082 - 13ft 9in 20 row (18 bar anchors) 29kg
3083 - 14ft 6in (19 bar anchors) 31kg
3084 - 15ft 3in (20 bar anchors) 33kg
3085 - 16ft 24 row (21 bar anchors) 34kg
3073 - 16ft 10in (22 bar anchors) 36kg
3086 - 18ft 4in 28 row (24 bar anchors) 40kg
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 2.3M WIDE (3W X 4L TINES) EXTRA HEAVY DUTY LEVELLING HARROW (2.3M - 5.6M)

Mainly used for vineyard or orchard application. The delver is designed to move soil from the centre of the rows back out to the base of the vines or trees.
Can be used for either flat or vee shaped rows and is adjustable for width.
Key Features:
Primarily designed for vineyard use, but useful in a variety of applications.
In the vineyard, it is ideal for cleaning the ground between vines and moving soil back onto vine bases.
The delver consists of two mouldboards, which are adjustable to suit different row widths. Using the extensions provided it is possible to work row widths of approximately 3 metres.
The 12" furrower on the front is designed to penetrate into the ground. The depth can be adjusted by raising or lowering the tractor linkage. The angle of the V drain is adjusted by adjusting the top link.
The delver is much more effective if the soil has been cultivated previously and is not compacted.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS DELVER - VINEYARD SOIL / DEBRIS SCRAPER

The Nobili rear mount BP series mulchers are multi-purpose machines ideal for pasture topping with optional hydraulic side shift models.
Suited to tractors up to 150HP with cutting height maintained by working skids.
Specifications:
Connection Type: Linkage
Blades (Cast Hammers): 24
Tractor HP: 80-150 HP
Working Width (mm): 2374
Product Weight (kg): 790
Width / Height / Depth (mm): 2548 / 550 / 1398
Features:
Suggested Use: Grass mowing and green pruning's up to 75mm in diameter.
Construction: Low profile body, no opening tailboard.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced rotor.
Control: Fixed headstock or optional hydraulic side shift models.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Skids
Options:
- Optional model comes with hydraulic side shift.
- Semi Swivel Wheels
- Full Width Roller (Standard Version)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 2.4M BP PASTURE MULCHER (SUIT 80-150HP)

Designed for small to medium size tractors.
Popular cultivation tool used to break up soil for preparing crops or controlling weeds. Discs can cut up and mix in trash, are very hard wearing, long lasting and easy to use.
Fitted with 28mm (1 1/8in) square high tensile gang bolt axles and high quality triple sealed bearings.
14-18 plate models fitted with 75x75x6mm double beam whilst 10-12 plate models are fitted with main single beam and angle support bracket.
Cat 1/2 linkage.
Clamped on by U-bolts for simple adjustment.
Bellota Boron discs are manufactured under strict quality specifications that ensure the right hardness and uniformity throughout the disc. This includes clamp hardening to prevent distortion, lathe turning of the edges and hardened to 50HRc for low wear and long life.
Features:
No of Discs 14
Disc Diameter 550mm (22inch)
Disc Thickness 5mm
HP (min) 35HP
No. Bearings 4
Working Width 1600mm (5ft 3in)
Weight 385kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MEDIUM DUTY OFFSET DISCS - 14 PLATE X 22 INCH DISCS - 0249, MIN 35HP

The Grow-Master aerator can turn your tired, life-less soil into productive, high yielding pastures. This versatile implement will aerate, cultivate and renovate your soils.
The specially designed tines shatter the compact ground, increasing the absorption of water and air which in turn encourages root growth. The tines have a slight twist in them which cracks the ground in a sideways and downwards motion. This allows water, air and nutrients to move readily through the soil profile making them more available for plant roots.
The grow-master is fitted with double rollers which are angled in opposite directions. This reduces sideway drag on the tractor when ground engaging. Each roller can be adjusted for various degrees of angle from 2.5 to a maximum of 10 (four positions).
The maximum offset position is the most aggressive and is most often used for cultivation and for over-sowing new pasture seed. Ballast weight added to the frame will ensure that the tines are buried down to the hub.
Horsepower requirement is quite low with a minimum of only 35Hp required for the 2m unit. A tow hook is mounted on the back for dragging pasture harrows. 2 bolt gang adjustable to alter rotor angle.
Large floor plate deck for carrying ballast (weight) 100x100x6mm RHS Perimeter frame. Heavy Duty 2 triple sealed bearings. Double rollers allow machine to be angle for more aggressive cultivation.
Easy adjust mounting stands. Solid 75mm rotor. Roller is fitted with the same 2 heavy duty bearings used on the Berends Rotary Drain digger for over 30 years. The patented Shatter tines are 8 long and have a unique angle providing a much superior finish to conventional straight tines.
Product Specifications
Aerate, Renovate and Maintain 00 Neutral Setting
The axle is straight
This is used when the soil structure is very friable.
The tines will usually penetrate their full depth.
This setting is usually used to maintain the soil structure, possibly once a year in a maintenance program.
Aerate and Renovate 2.5 Setting
The axle has 2.5 degrees of angle
This is ideal for your first use of the aervator.
If your ground is hard the tines may not penetrate very far, maybe only 25-50 mm.
Dont worry, this is normal. Aeration is not a quick fix.
Aerate and Renovate 50 Setting
The axle has 5 degrees of angle
Use this setting for subsequent uses of the aervator.
With each pass you should change the direction of travel.
Across then diagonally is ideal.
Cultivate and Renovate 7.5 Setting
The axle has 7.5 degrees of angle
On this setting the aervator starts to get aggressive.
You may require additional weight or ballast to acheive maximum depth.
This setting is best used after previous passes and will fracture any compaction layer.
If used on extremely hard ground the tines will probably not penetrate very far.
Cultivate 100 Setting
The axle has 10 degrees of angle
On this setting the aervator is very aggressive.
Again use weight.
This setting is best used after previous passes and will fracture any compaction layer.
If used on hard ground the tines will probably not penetrate very far.
Optional
Trailing Wheelkit includes wheels, drawbar and hydraulic lift (0190)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GROWMASTER 2800 AERATORS - DOUBLE ROTOR - 0177

Murray Series 32 16 Disc Harrow - Offset Tandem 1.83m.
The Murray Series 32 Disc Harrow is an excellent choice for soil preparation and breaking up virgin land. Built heavy duty, the tandem disc setup combines rugged capabilities with smart features.
The durable box frame is built in two parts, with a pivot point that is able to be locked providing different working configurations. It supports four gangs of discs two front and two rear. Gang angles can be individually adjusted by way of crank screws to suit different conditions. The angle can be adjusted between 0 and 20 degrees to vary the aggression of cultivation. Disc gangs are mounted on sealed-for-life bearings set in rubber. No greasing is required which minimises unproductive maintenance downtime.
In a standard form the Series 32 is a four gang Disc Harrow for use with light to medium powered tractors. By removing the rear frame section and gangs, the Series 32 becomes a handy two-gang implement for light work. Alternatively, the rear frame section and gangs can be pivoted upwards to provide additional weight for penetration by the leading two gangs in heavier conditions. Under uneven ground conditions, the rear frame section and gangs can be allowed to float over undulations for even cultivation.
The Murray Series 32 Disc Harrow is a three-point linkage mounted implement suitable for Cat II hitches. It is supplied complete with fittings and fasteners including linkage pins and clips. Available in two popular sizes 16 discs covering around 1.83 metres (6ft) and a 20 disc model covering 2.28 metres (7ft 6in) approx.
Under certain conditions Disc Harrows can throw up a furrow between the inner discs. The option of a centre spring tine is available which will maintain a level finished behind the harrow in these situations. Optional sets of blade scrapers are also available to keep discs clean and working efficiently in wet or sticky conditions.
Features:
- Available in 16 Disc or 20 Disc models
- Suitable for Cat II systems
- Adjustable gangs from 0 20 degrees
- Sealed for life bearings
- 559mm (22 inch) scalloped discs
- Removable/ pivot rear frame section
Specifications:
- Coverage (m): 1.83
- Coverage (ftin): 6
- Power Requirement: 35 to 55 hp
- Standard Discs: 22 Scalloped Flatback Discs
- Weight (kg): 520
Optional Equipment:
- Scraper set: 16 Disc- 43kg
- Scraper set: 20 Disc - 54kg
- Spring Tooth Centre Tine assembly (1)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1.83M 16 DISC HARROW - OFFSET TANDEM

The Mower Series along with the ATV Series are a recent introduction to the Climaxx ramp range. Ideal for Government Departments, Maintenance Contractors, and serious Domestic users.
Featuring impressively low weights whilst maintaining SureWelds full level of quality, these versatile models are the solution to a need for dependable light duty Ramps in keeping with the expectations of Australian operators.
Mower Series ramps are curved for low clearance applications in comparison with the ATV Series which are of straight design. They are available as rigid (Model: 6/04521ATV) or with a folding section (Models: 6/04521ATVF, 6/042521LCF) for ease of transport.
A distinctive feature of these Ramps is their adaptability to varying loading heights and bearing surfaces.
Suitable for use with lightweight machinery such as Ride-on Mowers. Suitable for use with pneumatic tyres. Not suitable for use with steel tracks. Not suitable for use with solid tyres.
SureWeld are a leading supplier of Australian Made quality Aluminium Loading Ramps.
Specifications:
Rated Capacity: 450kg
Ramp Mass: 6kg
Ramp Length: 2.1m
Folded Length: 1.4m
Overall Width: 275mm
Internal Width: 240mm
* The 6/042521LCF is curved for low clearance applications such as loading of ride-on mowers.

Features:
Foot adaptable to varying gradients.
Tread Surface of Mower Series Ramps.
Hook or Steel Pin Connection.
Models:
6/04521ATV - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, N/A Folded length, 275mm Overall Width, 240mm Internal Width.
6/04521ATVF - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, 1.4m Folded length, 275mm Overall Width, 240mm Internal Width.
6/042521LCF - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, 1.4m Folded length, 275mm Overall Width, 240mm Internal Width.
*The 6/042521LCF is curved for low clearance applications such as loading of ride-on mowers.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 2.1M CURVED FOLDING CLIMAXX LOADING RAMP FOR MOWER

Murray 53100, Series 53 3PL Counterweight
85kg Empty
600kg Capacity
Cat I & II
3PL refers to the way to attach implements to tractors. This configuration provides the best counterbalancing effect by applying some force behind the rear axle and reducing in this way the weight carried by the front tires, rims and axle.
Simply load up with 600kg of concrete, or any materials on your farm, to counter the weight on the front loader.
Counterweights are important in maintaining the stability of the tractor when using front end loaders. With a front end loader fitted onto a tractor, the centre of gravity shifts forward. The centre of gravity is further amplified when the loader lifts a load thus putting pressure on the tyres, axle and rims.
The Counterweight prevents Tractors overturning during loader operations.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 3PL COUNTERWEIGHT (600KG CAPACITY) - CAT I & II

Specifications:
Connection Type: Linkage
Min PTO HP: 40
PTO: 40 - 75HP: Series 4.
Product Weight (kg): 95
Gearbox Ratio: 23.18:1 clockwise rotation.
Clutch: 2 x 150mm friction plates (40/50HP), 2 x 200mm friction plates (75HP).
Main Frame: 75 x 75 x 4mm RHS (158PHD30), 100 x 100 x 5mm RHS.
Mounting: Cat. I TPL with Cat. II bushes supplied.
Effective Digging Depth: 1m.
Options:
DCA6 - 6"auger
DCA8 - 8" auger
DCA10 - 10" auger
DCA12 - 12" auger
Ideally suited for a variety of farming purposes including digging post holes and tree planting on lifestyle, medium acreage, broadacre, viticulture and horticultural farms.
Note: Augers are NOT SUPPLIED with the Post Hole Digger.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 40HP POST HOLE DIGGER (AUGERS NOT INCL)

Grader blades designed and developed over many years to provide the user with a most versatile implement at a reasonable cost.
Features:
Fitted with positive quick release centre for angle selection, to minimise wear and tear.
Allows 24 different angle positions.
Blade can be reversed for back filling.
Alternative holes for the lower linkage arms, provide ample tilt for V-draining.
Heavy duty reversible cutting edges for maximum life.
Optional pneumatic wheelkit available for depth control.
Specifications:
Cutting Edge: 4ft
Mouldboard Thickness: 6mm
Mouldboard Height: 350mm
Tractor HP: 16-35
Weight: 101kg
Options:
0001 Grader Blade Wheel Kit
0418 Boxed ends suit Standard model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS STANDARD DUTY GRADER BLADES 4FT (1.2M) - 0002, SUIT 16-35HP

Find Farm Machinery For Sale in Coopers Plains. Browse 7615 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

NOBILI TBE OFFSET MULCHERS 2.2M - TBE222/06 - 90-150HP

WALTERS FENCING BLUE JEN II WIRE SPINNER

MURRAY 2.3M WIDE (3W X 4L TINES) EXTRA HEAVY DUTY LEVELLING HARROW (2.3M - 5.6M)

JOHN BERENDS DELVER - VINEYARD SOIL / DEBRIS SCRAPER

NOBILI 2.4M BP PASTURE MULCHER (SUIT 80-150HP)

JOHN BERENDS MEDIUM DUTY OFFSET DISCS - 14 PLATE X 22 INCH DISCS - 0249, MIN 35HP

JOHN BERENDS GROWMASTER 2800 AERATORS - DOUBLE ROTOR - 0177

MURRAY 1.83M 16 DISC HARROW - OFFSET TANDEM

SUREWELD 2.1M CURVED FOLDING CLIMAXX LOADING RAMP FOR MOWER

MURRAY 3PL COUNTERWEIGHT (600KG CAPACITY) - CAT I & II

SILVAN 40HP POST HOLE DIGGER (AUGERS NOT INCL)

JOHN BERENDS STANDARD DUTY GRADER BLADES 4FT (1.2M) - 0002, SUIT 16-35HP

Farm Supplies Machinery & Equipment

Dealer Address