Farm Supplies Machinery & Equipment

RM40 22 Plate Heavy Duty Trailing Offset 0823
The RM40 is one of the most popular of our wide range of offset and tandem disc cultivating ploughs.
Features:
Great digging ability ideal for primary and secondary tillage using 40Hp to 90HP tractors.
Twin pressure screws each side can be adjusted individually.
Easy gang adjustment for the perfect level finish.
Solid cast spools individually machined to suit the disc for extra strength.
Triple sealed bearings.
230mm (9 inch) disc spacing.
Fitted with 560mm x 5mm (22 inch x 3/16 inch) scalloped discs.
28mm square high tensile gang bolts.
Weight where it counts in the gang not ballast on the frame (which adds load to the bearings) like most other machines.
Prong type scrapers are standard equipment formed scrapers available on request.
Fully adjustable drawbar adjustable offset ideal for orchards.
Fitted with Holden type tyres.
Specifications:
Approx Weight 1170kg
No. Bearings 8
Cutting Width 2.5m (8ft 6in)
No. Axles 4
Options:
0951 Optional Jack
0953 Optional Furrow filler (not sold separately)
* Upgrade to 24 inch x 5mm discs POA

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM40 22 PLATE HEAVY DUTY TRAILING OFFSET - 0823, SUIT 40-90HP

Extra Strong Kit For Your Concrete Posts. Need a simple rust resistant gate kit for your concrete posts? Our hot dipped galvanised concrete post gate kits are quick and easy to install.
Install Low To The Ground. The design of this hinge also allows you to install the gate low to the ground without having to drill too close to the ground and increase the risk of your posts rotting.
This gate kit was designed with concrete posts in mind. We have created a simple to install, rust resistant gate kit that is perfect for areas where rust can occur (such as near the coast).
The 300mm bolt length means you have extra length to adjust your gate to get the perfect swing angle.
This gate kit is perfect for stone concrete posts, Violet Town concrete posts and most other Australian concrete farm posts.
Price quoted is for one kit which includes:
- A 25NB steel bottom gudgeon.
- Top strap.
- Adjustable keeper plate.
- Four 50mm washers and four nuts.
- Your choice of latch (below)
- Large 50mm washers
Discounts apply for bulk kit purchases of 10+, 25+, 50+ or 100+.
Specifications suit:
- 25NB gate
- <2500mm post
Features:
- Bolt-through
- Suits concrete posts
- Galvanised
- No power needed
- Adjustable
- 50mm Washers
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL CONCRETE POST HINGE SET 25NB -FG9

Made in Australia
Features:
- Tynes angled at front edge allow larger volume to be collected, while reaching over debris piles, without disturbing the ground
- Max Opening 800 mm
- Dual independent grapples, cylinder covers
- Greasable pivot points
- 200 mm tyne spacing's
- Inc hoses, fittings & couplings
- Suitable for Extreme Duty
Dimensions:
Suits: 120 - 180 hp
Max Opening = 800 mm
Tyne Spacing's = 200 mm
Tyne Diameter = 16 mm
Max Width = 2,350 mm
Weight = 520 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH DOUBLE CLAW BUSH GRAPPLE (2,350 MM)

67 L/min pump with Male - Female shaft. Additional Male-Male shaft model also available (CAPS071S).
All Silvan APS series high pressure diaphragm pumps are built for 540 RPM operation, are self-priming and feature a corrosion resistant cast anodised aluminium body.
Tough and reliable they will run dry without risk of damage.
All pumps are supplied with appropriate hose connections, mounting base plates and 1 3/8 six splined shaft.
Specifications:
Pump Size (L/min): 67
Height / Width / Length (mm): 289 / 343 / 238
Product Weight (kg): 18.4
Max Pressure : 5,000 (kPA)
Shaft: Male - Female
Diaphragms: 3
HP required at Max Pressure: 9.1
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN APS71 - HIGH PRESSURE DIAPHRAGM PUMP (67 LPM, MALE - FEMALE)

Specifications are shown in images.
Features:
- Working width options of 1m and 1.5m
- Suitable for excavators up to 15T and skid steer loaders
- Heavy duty drum assembly - easily swapped on-site
- Fixed tungsten tooth drum - mulch trees down to the ground
- Heavy duty hydraulic motor & steel construction
- Hinged debris cover for optimal mulching performance
- Replaceable skid plates for ground protection & drum storage
Fixed Tungsten teeth:
- The fixed solid steel teeth feature tungsten tips with a robust blunt cutting edge. The tungsten teeth are the toughest and most versatile option, grinding through the thickest solid timber up to several inches thick, but will also function on smaller lighter material like hedges and tree branches.
- For the heaviest duty jobs requiring completely clearing trees from an area or for mulching felled timber into chippings the fixed tooth is the best option.
Options:
- Drum assembly
- Push bar assembly
Mulcher wear parts:
- Fixed tungsten tooth
- Swinging hammer tooth
The Auger Torque VM1500 perfect for excavators and skid steers and can cut up to 1.5m in width.
Suitable for excavators and skid steer loaders, these mulchers are capable of handling some of the toughest clearance applications as well as more precise hedge trimming, and a working width of up to 1.5m.
Making this mulcher unique is the option of different drums and the variety of easy to fix teeth. The fixed tungsten teeth drum gives a robust blunt cutting edge for thick timber, hedges and branches. The swinging hammer teeth gives a cleaner and more precise cut and level surface for hedges.
So, whatever the job at hand you can easily switch between the options, providing the ultimate solution for all your land clearing needs.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AUGER TORQUE 1.5M WIDTH SERIES 3 VARIABLE MULCHER WITH FIXED TUNGSTEN

Note: This model does not include a crumbler, however, it is available as an option. The second & third picture of this listing shows the cultivator with a crumbler.
Features:
Heavy duty model features a 50×50 RHS frame throughout with larger tines, providing a heavier and more rigid machine for hard ground and primary cultivation.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16) tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 20
Tine Size: 45mm x 12mm
Frame Size: 50mm x 50mm RHS
Tractor HP Guide: 3HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Solid Rubber Depth Wheels
HD Tine helpers
3m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3M S-TINE (20 TINES) HEAVY DUTY CULTIVATOR - MIN 60HP

Best suited to medium horsepower tractors up to 95HP for grass and light pruning's with cutting height maintained by the rear roller.
Specifications:
Connection Type: Linkage
Tractor HP: 40-95 HP
PTO RPM: 540
Y Blades: 40
Working Width (mm): 1520
Weight (kg): 370
Height / Width / Length (mm): 420 / 1720 / 750
Features:
Suggested Use: Grass mowing and green pruning's up to 50mm in diameter.
Construction: Low profile body, no opening tailboard.
Driveline: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with overrun clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. I three point linkage, floating top link.
Height Control: Roller (standard fitment).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI 1.5M BNE MULCHER (40-95HP)

Trailed air assist Stiletto 2000 litre sprayer with 161L/min diaphragm pump, electric controls, a Glideflex axle upgrade, wide angle shaft and a 900mm fan. Ideal for narrow vineyards and orchards. Additional model available with Bravo 180S automatic rate controller (DST23AB8G).
Specifications:
Market: Horticulture. Viticulture
Tank Size (L): 2000
Connection Type: Trailed
Min PTO HP: 60
Pump Size (L/min): 161
Height / Width / Length (mm): 1500 / 1540 / 3800
Product Weight (kg): 640 (dry)
Application: Vineyards and Orchards
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body with brass heads and manifolds. IDS1701: 161L/min. capacity 5000kPa pressure.
Fan Size: 900mm axial flow type, 10 bladed fan with curved nylon reinforced blades, air straightening vanes and protective mesh cover.
Nozzles: Flip-over type for dilute/concentrate spraying. Ceramic jets, stainless steel swirl-plates, 16 nozzles with twist on/off.
Gearbox: Oil-bath type, 2-speed with neutral position
Controls: 40 bar electric section valves, master valve, electric pressure regulator and in cab controls.
Tank: Polutuff impact resistant polyethylene construction, calibrated sight line, easy open lid, 40mm drain valve and built-in 15L fresh water tank.
Frame: Galvanised steel with jockey wheel & adjustable drawbar.
Agitation: Pump bypass plus venturi agitator
Pressure gauge: 100mm, 0-60 bar glycerine filled gauge.
Filtration: Lid strainer, suction line strainer & stainless steel nozzle filters.
Wheel Equipment: Glideflex suspension axle, 2x15" tubeless tyres on galvanised rims (max speed rating 30 km/h)
PTO Driveshaft: Quality Bondioli & Pavesi constant velocity driveshaft with quick release pins & safety cover.
HP Required: Min 60 PTO HP
Options:
- Twin nozzles (includes extra nozzles) (D99-182)
- Flotation tyres - 400/60 x 15.5" with fixed axle (in lieu of standard singles) (D99-80)
- Additional model available with Bravo 180S automatic rate controller (DST23AB8G).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 2,000L TRAILED STILETTO SPRAYER - MIN 60PTO HP

High quality range of augers which feature 6mm flighting, alloy plate boring heads with double cutting edges for greater drilling effectiveness.
Material: 50mm pipe
Finish: Premium enamel top coat.
Flights = 4
Weight = 22 kg
Diameter = 254 mm or 10 inches
Other sizes (152mm, 203mm, 254mm, 305mm) available as listed on this same website.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 254MM DOUBLE START AUGER (10 INCH)

3.25m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3305 - 3.25m (10ft 8in) - 2/9 Tine, 2/12 Tine - 46kg
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Trailed over row TGS 2 row 2000 litre sprayer with 182 L/min pump, electric valve controls and 500mm twin turbine fan. Ideal for vineyards and berries.
Specifications:
Market: Horticulture. Viticulture.
Tank Size (L): 2,000
Connection Type: Trailed
Min PTO hp: 75
Pump Size (L/min): 182
Height / Width / Length (mm): 3300 / 1800 (less head), 2490 (folded) / 4680
Product Weight (kg): 980 (dry)
Application: Vineyards, berries
Features:
Head: Multi row spraying head with air assist diffusers and twin spray nozzles. Each air diffuser features swivel adjustment and air deflector. Poly air tubes shaped to surround canopy. Both arms have independent hydraulic fold with manual width & height adjustment (2 tractor remote sets required).
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body with brass heads and manifolds. IDS2001: 182L/min. capacity 5000kPa pressure.
Fan Size: 500mm twin impeller turbine fan, power consumed 48 kw (64HP).
Nozzles: Twin hollow cone ceramic nozzles per outlet with individual on/off non-drip taps.
Gearbox: 2-speed with neutral position, oil-bath type
Controls: 40 Bar electric section valves, master valve, electric pressure regulator and in cab controls
Frame: Galvanised steel chassis, adjustable drawbar with jockey wheel.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and 40L fresh water hand wash tank.
Chem Induction: Suction probe with detachable hose.
Agitation: Pump bypass plus venturi agitator.
Pressure Gauge: 0-60 bar glycerine filled gauge fitted to pump.
Filtration: Lid strainer and large capacity suction filter.
Wheel Equipment: Tandem simplicity suspension with 10 x 15" wheels & tyres. (2000L & 3000L) or 11.5 x 15.3" wheels & tyres (3500L & 4000L)
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 75 PTO HP
Options:
- IDS2600 pump, 249L/min capacity, 5000kPa pressure (D99-149)
- Bravo 180S automatic rate controller (D99-143)
- Vertical lift head assembly (1 extra set of tractor remotes required) (TGS-LIFT)
- Quick turning hitch (D99-170)
- Hydraulic row width adjustment (1 extra set of tractor remotes required) (D99-186)
- Road kit (D99-151)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 2,000L (2 ROW) TGS TRAILED SPRAYER - MIN 75PTO HP

Made in Australia
Features:
- Heavy duty load guard
- Easy hook up with no hinging tynes
- Adjustable latch locked tynes - fixed at top and bottom to prevent bouncing
- Notch positions for multiple tyne spacing's
- Lifting capacity = 2,500 kg
- Tyne size = 40 mm x 100 mm
- Tyne length = 1,070 mm
- Weight = 165 kg
Note: 3PL Pallet Forks come standard with bottom linkage pin set 100 mm above ground level
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC CAT II 3PL PALLET FORKS (2,500 KG)

Find Farm Machinery For Sale in Coopers Plains. Browse 7604 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM40 22 PLATE HEAVY DUTY TRAILING OFFSET - 0823, SUIT 40-90HP

ROTECH RURAL CONCRETE POST HINGE SET 25NB -FG9

HIMAC EURO HITCH DOUBLE CLAW BUSH GRAPPLE (2,350 MM)

SILVAN APS71 - HIGH PRESSURE DIAPHRAGM PUMP (67 LPM, MALE - FEMALE)

AUGER TORQUE 1.5M WIDTH SERIES 3 VARIABLE MULCHER WITH FIXED TUNGSTEN

JOHN BERENDS 3M S-TINE (20 TINES) HEAVY DUTY CULTIVATOR - MIN 60HP

NOBILI 1.5M BNE MULCHER (40-95HP)

SILVAN 2,000L TRAILED STILETTO SPRAYER - MIN 60PTO HP

SILVAN 254MM DOUBLE START AUGER (10 INCH)

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

SILVAN 2,000L (2 ROW) TGS TRAILED SPRAYER - MIN 75PTO HP

HIMAC CAT II 3PL PALLET FORKS (2,500 KG)

Farm Supplies Machinery & Equipment

Dealer Address