RV 5216 Plus produces bales of unrivalled quality in all crop conditions. Choice of high capacity intake systems including rotor and 14 knife (this model) SuperCut pre-chopping systems.

The defining feature of 5216 balers is their ability to produce bales of unrivalled quality in all crop conditions. Efficiency and performance are unmatched, while smart "Intelligent density 3D" which allows you to choose the bale density best suited to your crop conditions (see picture).

The bale chamber of the Vicon RV 5216 is equally at home in silage,
hay and straw.

- 2.2m pick-up with small diameter pick-up reel for fast and efficient throughput.
- Pick-up with 5 rows of tines respectively.
- Twin cam tracks on the 2.2m wide pick-up.
- Tine bars with two central supports on the 2.2m wide pick-up.
- Small diameter pick-up design.
- Roller crop press is standard on the 2.2m wide pick-up.
- Narrow transport width.

SuperCut-14

The SuperCut-14 knife chopping system provides a fast and efficient flow into the baler. With a chopping length of 70 mm it is the ideal solution for producing tight bales with superb silage quality. Each individual knife is spring protected against foreign obstacles. The knife will immediately return to its working position once the obstacle has passed.

Parallelogram DropFloor System:

Parallelogram Drop Floor enables the operator to clear blockages easily from the tractor cab without any crop loss. Drop the floor to free the rotor of blockage, engage the PTO to feed the blockage through and close the floor to continue baling.

Intelligent Density 3D:

Setting and selection of correct bale density is vital in order to get the right quality of the bale. Especially when the baler is utilized through the full season in different crops like straw, hay and silage it is important to adjust the bale density to the specific type of material. Intelligent Density 3D with 3 pre-selected bale density settings making it very easy to choose the correct bale density in different crops.

It is however still possible to customize the bale density in 3 separate zones each with a choice of diameter and pressure to match specific requests. With the new Intelligent Density 3D application, three pre-configured bale densities are available from the menu of the control box, each of them tailored for straw, hay or silage. This makes the change-over from different crop materials much easier limiting the risk of mistakes.

Baling dry straw and want the heaviest bales possible? Maximum pressure is set in every zone.
Baling hay? The soft centre core is set to let the bale breath, with gradually increasing pressure towards the outer layer.
Baling wet silage? Pressure is reduced in the centre and mid zones.

PowerBind Net Wrap:

- One of the fastest net wrap actions available. This means minimum downtime and maximum time baling.
- The net is fed directly into the bale chamber by an injection arm in a flat movement angle to keep the net tight at all times.
- Accurate and extremely reliable net injection.
- No interference from external factors such as wind and crop.
- When the bale is 90% complete the injection arm moves forward, ready for the net injection. No time is spent picking up the net.
- Very low loading height, for maximum convenience and time saving. To replace the empty roll just swing out the shaft and replace it with a new roll
- The PowerBind net wrap system allows the net to extend past the edge of the bale.

Focus 3 Controls:

Kverneland Group Mechatronics has recently launched a new operator terminal, the Focus 3. This terminal is developed for specific implement types and will only be delivered as package for those implements, together with the electronics for balers. The terminal Focus 3 is positioned in the market as an economy solution.

- Focus 3 terminal is easy to learn and very intuitive, with focus on functionality and operating simplicity.
- Focus 3 terminal is a universal control terminal which can also be used with other implements from Kverneland Group.
- Focus 3 terminal gives you full control of all functions from the tractor cab. They are shown on a large and very clear digital display.
- Focus 3 terminal monitors and controls all necessary functions with all relevant parameters / information visible at a glance. The control box is also driving the binding automatically without any intervention from the operator.


All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!

Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE