Farm Supplies Machinery & Equipment

Telescopic for High Fencing Work Capable of installing posts up to 11ft.
The machine for those in need of specialist tall fencing and post work. All the features of the Multi-Sett machine, plus the ability to drive extra long posts and to drive them deep.
The Tele-Sett (telescopic version of Mulit-Sett) have been around for years and have been tried and tested by farmers and contractors alike.
The Multisett can handle any type of post up to 8 (2.4m) whilst this Tele-Sett can handle posts up to 11" (3.3m) and uses a 227kg (500lb) hammer as standard. If required this hammer weight can be increased by 45kg (100 lbs) either once or twice to increase the impact delivered to the head of the post.
The hammer hydraulically travels up the mast of the post driver and comes down with some force onto the head of the post forcing it into the ground. The integrated auger system on the post driver enables the operator to make a pilot hole which is normally somewhat smaller in diameter than the post to enable a good tight fit.
In its retracted form no taller than a Multi-Sett this added flexibility is gained at no sacrifice in power, rigidity or stability. The longer post is driven with the same ease and accuracy as the standard machine. The mast height setting is infinitely variable throughout its movement range and can be adjusted at any time during operation by the operation of a single lever. When set, it is hydraulically locked there can be no creep or jam while working in extended mode.
Large stabilising pads assure a firm base for the machine in any conditions.
Suits tractors of 40kW (60HP) and over, due to the extra weight, and stability.
The control panel is an enlarged version of the Multi-Sett with the same ergonomic approach to lever movement and control.
Labour saving, all weather system is easy to operate. Its speed and accuracy of setting make it extremely cost effective.
Optional Items include the following...
Power Pack Kit (to drive off the PTO shaft for tractors which do not have suitable remote hydraulics. A hydraulic power pack is available which uses the tractors PTO shaft.)
Side Shift (rear mounted Hydraulic)
Double Side Shift (operates both sides)
Additional Driving Weights
FenceMate Hydraulic Wood Borer with5/8 drill chuck
Skid Steer Attachment Plate
FEL Mounted Wire Winder with Euro Hitch
Augers : sizes available from 70mm - 305mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUNRO TELESETT POST DRIVER (TELESCOPIC HIGH LIFT) INCL AUTODIGGER & TILTS

Experience the full power of the STOLL ProfiLine Next Generation. The amazing best values in all areas ensure the highest quality in lifting capacity and lifting height, stability and loading speed. In addition to this, the individually selectable accessories from the ProfiLine Next Generation fit in perfectly with your needs as a farmer or contractor. True professionals for professionals.
German engineering is known all around the world for its high quality, performance and reliability. That is why we develop all STOLL front loaders with precisely these values in Germany. They combine state-of-the-art technology with innovative solutions and this is exactly what we expect from high-quality German products.
All Stoll FZ Loaders include Premium Internal Self Level System, 3rd Function and Manual Soft Ride, Single Lever Joystick, 2 Bank Valve and tractor hydraulics, Rams Horns Bump Guard and Subframe kit.
FZ10 Specifications:
Oil Flow: 39 - 23
HP Range: 70 - 100
Buckets That Suit This Loader:
1.9 Heavy Duty Gravel Bucket
1.8 - 8000 Heavy Duty 4 in 1 Bucket
Loader Options:
- 4th function
- Hydro fix - attachments per circuit
- Hydro fix - attachment side only
- Electric comfort drive upgrade
- Return to level
- Plus function
- Colour code sticker set
- Hydraulic quick change
- Full mesh grille guard
Control Options:
- Hoses to mid remotes
- Double rear diverter upgrade
- Tap and tee manual
- Pro control joystick system upgrade
Further Information on this Loader:
Full Power - Maximum Stable Construction:
- The ProfiLine FZ front loaders are made of fine grain steel - Advantage: Highest stability with maximum torsional rigidity at the same time.
- The lifting arm boom is bent from a single piece of steel - The control rods are installed inside the beam. All the hydraulic lines are well protected but can be freely accessed under the beam.
- Kinematics of the entire swing arm body adapted to modern tractors. This results in optimum positioning of the swing arm to relieve the front axle and the best possible clearance for steering angle and axle swing path.
- In order to avoid the need to regularly replace the hose lines by the lifting arms in accordance with DIN 20066, we use wear-free steel hydraulic pipes instead.
Stoll Attachment Components - less load on the tractor and a greater accurate fit:
- The attachment components can be installed perfectly on all common tractors that is why the designers at STOLL individually adapt every tractor model.
- Reduced load on the front axle thanks to the optimal positioning of the attachment components close to the drivers cab. This shifts the centre of gravity of the entire front loader to the centre of gravity of the tractor.
- Often the windscreen can only be opened together with a STOLL attachment component.
- The attachment components fit perfectly as they are individually adapted to each tractor.
Z-Kinematics - best view and high performance:
- The rods of the mechanical parallel guide are located in the lifting arm booms - the basis of the Z-kinematics.
- This frees up the view for the driver. No parts above the lifting arms obstruct or are in the way. Another benefit: The front loader can also be mounted closer to the drivers cab - result: Reducing the load on the tractor by optimally positioning the attachment components.
- Front loaders with Z-kinematics have even greater lift capacities and breakout forces. There is no loss of lifting power.
Convincing benefits for you:
- The various front loader models fit perfectly on tractors from 50 to over 300 hp.
- Best quality fine-grained steel for a front loader with high torsional rigidity and stability.
- The extremely high values for the lifting capacity and height are impressive.
- Z-kinematics and the optimally positioned cross tube provide the driver with the best view of the implement.
- For maintenance work, all you need is a commercially available spanner to get to the lines.
- Best equipment for optional features so you can work with even greater efficiency:
- Return-to-level, rapid emptying and re-scooping.
- Re-scooping series.
- Depending on the loader model, quick release frames are available for other coupling systems STOLL offers full flexibility.
So much more information included in the pictures!
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER STOLL FZ10 FRONT END LOADER (70 - 100 HP) (39 - 23 LPM)

Suitable for ROPS and CAB (optional).
The Burder loader series are built to be tough, agile and performs well even under extensive usage.
The Burder loader series comes with a multitude of features such as return to level, soft ride and quick change. These features helps to promote safety, efficiency and productivity in the work environment. As the industry evolves, consumers require more complex features in the loaders in order to enhance productivity in the work environment.
Burder invests resources in R&D to ensure consumer demands are met as well as constantly creating designs that exceed expectations.
Specifications (refer to images to see A, B, C, D & E):
Front Tyre Max: 8.3x20
Volume: 0.34m³
Tractor HP: 40-60
Bucket Width: 1.65m
Rated Capacity (std Bkt): 800kg
A. Lift Height to Pin: 2750mm
B. Dump Height: 2100mm
C. Dig Depth: 75mm
D. Crowd Angle: 35°
E. Dump Angle: 46°
FEL Weight Incl Std Bucket: 550kg
Features:
Mechanical Self Level
2 Bank Valve and Joystick Control (cable for CAB Tractors)
Choice of Euro or Burder Hitch at no Extra Cost
Deluxe Quick Detach Loader
Heavy Duty Gravel Bucket
Full Mesh Grille Guard
Vesconite Wear Bushes at all Pivot Points
Adjustable Level Indicator
Plated Greasable Pins
2 Pack Epoxy Paint
Choice of Colour for Loader Arms
24 Month Limited Warranty
* Burder 8000, 9000 and 10000 Series have Soft Ride as Standard
* Burder 9050 and above have 3rd Function as Standard

Options:
CAB Loader
2 circuit remote (ROPS & CAB)
Electric front remote (1 circuit)
Hydraulic quick coupler (4 port)
Hydraulic Dampeners Manual Shut off
3rd bank & Front Remotes 6, 8, & 9000 ROPS
3rd bank & Front Remotes 3000 ROPS
Detent per Spool
Front Remotes to plug into Tractor Remotes
Multi Doc-Front Remotes Male & Female
Multi Doc-Front Remotes Male Only
6 Port Hydraulic Quick Coupler
Hydraulic Dampeners Electric Upgrade
Eco-pro Joystick Upgrade
Hydraulic Quick Change (Upgrade Optional) - Requires 3rd function to operate (Additional cost)
4th Function
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 1.65M BURDER FRONT END LOADER (40-60 HP)

Pear Linch Pin Small Bucket (150 pieces)
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PEAR LINCH PIN (150 PCS. SMALL BUCKET) (10.5MM PIN DIA, 44.5MM TOTAL LENGTH)

Linkage Drawbar (Cat. 2) No. holes: 7.
Specifications:
Category: 2
Linch pin diameter (mm): 11
Hole diameter (mm): 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX LINKAGE DRAWBAR (CAT 2) (7 HOLES)

Suitable for ROPS and CAB (optional).
Titan products like Burder products are made with the same principles in mind. The products are built to be tough, efficient and suits even the most budget conscious.
Specifications (refer to images to see A, B, C, D & E):
Front Tyre Max: No Guards
Volume: 0.47m³
Tractor HP: 50-80
Bucket Width: 1.8m
Rated Capacity (std Bkt): 1000kg
A. Lift Height to Pin: 3100mm
B. Dump Height: 2300mm
C. Dig Depth: 150mm
D. Crowd Angle Ground Level: 40° Max Crowd Angle: 40°
E. Dump Angle: 60°
FEL Weight Incl Std Bucket: 800kg
Features:
Mechanical Self Level
2 Bank Valve and Joystick Control (cable for CAB Tractors)
Adjustable Level Indicator
Quick Detach Loader
Gravel Bucket
Rams Horns Bump guard (Option for Full Mesh Grill Guard in Lieu of Rams Horns)
Choice of Titan 2 Pin Euro, or Titan "Burder" Quick Change at no Extra Cost
Plated Greasable Pins
Australian Made
2 Pack Epoxy Paint
Tractor Colour or Charcoal Paint Scheme
12 Month Limited Warranty
Options:
2 circuit remote (ROPS and CAB)
Electric front remote (1 circuit)
Hydraulic quick coupler (4 port dump line single QRC)
Hydraulic Dampeners Manual Shut Off
Full Mesh Grill Guard in Lieu of Rams Horns
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 7300 - 1.8M TITAN FRONT END LOADER (50-80HP)

CBM Lower Link Hook Repair Kit.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CBM LOWER LINK HOOK REPAIR KIT (CAT 1)

To suit telehandler. Stick Rake with wings for FEL (Front End Loader) -3m.
The stick rake is suitable for use in clearing sticks, branches and scrub from an unused area or your paddock.
Specifications:
- Height (mm): 1025
- Width (mm): 3000
Optional extras:
- Mesh in-fill
- Mesh top guard
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER TELEHANDLER 3M FEL STICK RAKE WITH WINGS

Burders under axle and over axle blade operates similarly with the exception of the over axle blade having more ground clearance.
The blades are suited for heavy duty work and there are several blade options to choose from.
Specifications:
Model: 780
Blade Width: 3m
HP Range: 150-200 (price will be higher if blades are 200HP plus)
Options:
Hyd Angle (push off to either side)
Hyd Tilt (camber on road)
Hyd Forward Tilt
Wings
Depth Skids
Mesh Guards
Flip Down Root Rack
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 3M (10FT) 780 MODEL STRAIGHT OVER AXLE BLADE

Counterweights are important in maintaining the stability of the tractor when using front end loaders. With a front end loader fitted onto a tractor, the centre of gravity shifts forward. The centre of gravity is further amplified when the loader lifts a load thus putting pressure on the tyres, axle and rims.
To eliminate such risks, a 3 point linkage should be used. The counterweight is hooked up with a 3 point linkage set behind the rear axle. This is the best method to improve stability and it reduces the amount of pressure placed on the tyres, axle and rims.
Specifications:
Capacity: 800kg
Fill: Steel
Shape: T
Category: Cat 2
LxWxH: 1095 x 385 x 725
Features:
- Robust design
- Australian steel
- Steel casing and concrete filled
- Quality 2 pack paint
Safe & User Friendly:
- Engineered for maximum safety and efficiency
- Simple to use
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 800KG STEEL FILLED COUNTER WEIGHT (3PL)

Round Linch Pin (pack of 5).
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX ROUND LINCH PIN (5 PCS. AGRIPAK) (9.5MM PIN DIA, 44.5MM TOTAL LENGTH)

The Wiedenmann Terra Spike XD 8 is a powerful and efficient deep-aeration machine, purpose-built for professional turf care on golf courses, sports fields, and other high performance turf environments.
Designed to relieve compaction and enhance root development, it delivers healthier, highly resilient playing surfaces with minimal downtime.
Overall Width = 2.64 m
Working Width = 2.1 m
Weight = 1,345 kg
Min HP = 60 hp
Features:
- Deep Aeration Performance: Penetrates soil to depths of up to 27.5 cm, breaking up compaction to improve water infiltration, nutrient uptake, and long-term turf health.
- Unique Vibration Damping: Fitted with VibraStop and PowerPack systems, the XD 8 ensures exceptionally smooth operation, reducing vibration and wear for operator comfort and machine longevity.
- High Output Efficiency: With a working speed of up to 5 km/h and an area coverage capacity of 6,700 m² per hour (at 130 mm square hole spacing), the XD 8 delivers outstanding productivity across large turf areas.
- Quick, Tool-Free Adjustments: Working depth can be set easily and without tools via a hand crank. For added convenience, optional hydraulic adjustment allows operators to control depth directly from the tractor cabeven during operation.
- Advanced Technology: Standard features include VibraStop, PowerPack, TwinDrive, QuickSet, and QuickFit, giving operators precise control, reliable performance, and time-saving versatility.
Standard Build Inclusions:
- Drive Type (must select one)
1203024 Drive 345 RPM
1203025 Drive 410 RPM
- 1212019 Hydraulic Depth Adjustment
- 1203876 Set of Narrow Turf Retainers
- 1500120 Set of 32 Solid Tines 12mm x 200mm
Optional Extras:
1203875 - Set of Wide Turf Retainers
1203800 - Multi-Tine Holders for Needle Tines 5 mm & 8 mm, for 8/12 Tines (6 Required)
1191879 - Core Swath Board
1204980 - Lower Link Extension CAT I & II
1196890 - Soil Probe 1000 mm Length
1196895 - Soil Probe 650 mm Length
8609001 - Buffer Kit (Replace After 3 Years/100 Operating Hours)
8639002 - Tension Spring Kit (replace After 3 Years / 200 Operating Hours)
8649600- Additional Year Warranty Extension (24 months total)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WIEDENMANN 2.64M SPORTS FIELD DEEP AERATOR (60HP+)

Find Tractor Attachments For Sale. Browse 1834 Tractor Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Tractor Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

MUNRO TELESETT POST DRIVER (TELESCOPIC HIGH LIFT) INCL AUTODIGGER & TILTS

BURDER STOLL FZ10 FRONT END LOADER (70 - 100 HP) (39 - 23 LPM)

BURDER 1.65M BURDER FRONT END LOADER (40-60 HP)

SPAREX PEAR LINCH PIN (150 PCS. SMALL BUCKET) (10.5MM PIN DIA, 44.5MM TOTAL LENGTH)

SPAREX LINKAGE DRAWBAR (CAT 2) (7 HOLES)

BURDER 7300 - 1.8M TITAN FRONT END LOADER (50-80HP)

CBM LOWER LINK HOOK REPAIR KIT (CAT 1)

BURDER TELEHANDLER 3M FEL STICK RAKE WITH WINGS

BURDER 3M (10FT) 780 MODEL STRAIGHT OVER AXLE BLADE

BURDER 800KG STEEL FILLED COUNTER WEIGHT (3PL)

SPAREX ROUND LINCH PIN (5 PCS. AGRIPAK) (9.5MM PIN DIA, 44.5MM TOTAL LENGTH)

WIEDENMANN 2.64M SPORTS FIELD DEEP AERATOR (60HP+)

Farm Supplies Machinery & Equipment

Dealer Address