Farm Supplies Machinery & Equipment

Lower Link Ball, Guide Cone and Linch Pin (Cat. 3/3).
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SPAREX LOWER LINK BALL, GUIDE CONE & LINCH PIN (CAT 3/3) (ID: 1 7/16'', OD: 2 17/32'', WIDTH: 1 3/4'')

CBM Levelling Box Assembly.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CBM LEVELLING BOX ASSEMBLY (599MM MIN ADJUST)

Fitted with high quality European gearboxes and torque limiting PTO shaft.
Features:
Fitted with high quality European gearboxes and torque limiting PTO shaft.
2.5in x 8in hydraulic ram transfers approximately 1000kg of weight from the tractor onto the auger. Ideal for penetrating hard ground.
Requires two sets of remotes. Fitted with 1/2in double braid Ryco Hoses with 20,300 psi burst pressure.
All models are fitted with jib hook and transport chain as standard.
Fitted with adjustable stand for easy mounting to tractor.
Main boom is 100x100x6mm RHS tube.
Digs to a maximum 4ft (1200mm) depth if ground conditions permit. Auger extensions available on request.
Specifications:
PTO Shaft: Series 3/L3 torque limiting clutch
Gearbox: 85HP
Main frame: 100x100x6mm RHS Tube
Tractor Hp Required: 30-100HP
Net Weight less auger: 150kg
Options:
0279 4 auger
0265 6 auger
0267 8 auger
0269 10 auger
0271 12 auger
0273 15 auger
0275 18 auger
0277 24 auger
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS POST HOLE DIGGERS HYDRAULIC DOWN PRESSURE - 0262. 30-100 HP REQUIRED

Pear Linch Pin Small Bucket. (150 pieces)
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PEAR LINCH PIN (150 PCS. SMALL BUCKET) (11MM PIN DIA, 44.5MM TOTAL LENGTH)

CBM Lower Link Lift Arm.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CBM LOWER LINK LIFT ARM (CAT 3/2) (880MM LENGTH, RH FITTING)

Pricing shown is for standard model. Options and variables will adjust pricing accordingly, as may shipping rates to Australia.
The Nalaw Pro-Fencer is the most advanced machine of its kind allowing the professional fencing contractor to dispense wire at ground breaking speeds, saving both time and money.
The ProFencer is a unique rolling out, positioning and tensioning machine specifically for the professional fencing contractor.
It is a compact tractor-mounted machine that will pick up, load and dispense rolls of fabricated stock fencing up to 500 metres in length in the most challenging of conditions.
Individual hydraulic controls give the operator complete control of height, tilt, placement and wire tension in total safety.
Features:
- Safe hydraulic tensioning.
- Fully hydraulically operated including loading and rewinding
- Minimal disruption to wire surface
- Solid all steel construction gives reliability when you need it.
- Can roll out fabricated fencing from 700mm to 2m in height.
- Can be mounted and operated on front or rear tractor linkage.
Benefits:
- Reduced installation time.
- Solid Construction, Durable for long life.
- A safer way of fencing.
- Ease of use allows to get the job done quickly.
Application:
- Barb Wire Fencing.
- Cable Fencing.
- Long Run Fencing.
- Dog Fence.
Specifications:
Width: 2m
Depth: 1.3m
Height: 1.3-2m
Side shift travel: .700mm
Forward shift travel: .500mm
Clamp up and down: .300mm
Top link travel: .250mm in and out
Clamp inclination: (+/- 30 degrees)
Weight: 900kg
Optional Specifications:
Height of clamp assembly to 1.8m
Centre post for wire roll 1.8m
Barbed and plain wire holders
Tool box
Electric solenoid over hydraulics for operating in tractor cabin
Hydraulic Wire rewinder
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NALAW PRO FENCER - NALAW - NPF

Top Link Hook Repair Kit.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CBM TOP LINK HOOK REPAIR KIT (CAT 3)

The Grow-Master aerator can turn your tired, life-less soil into productive, high yielding pastures. This versatile implement will aerate, cultivate and renovate your soils.
The specially designed tines shatter the compact ground, increasing the absorption of water and air which in turn encourages root growth. The tines have a slight twist in them which cracks the ground in a sideways and downwards motion. This allows water, air and nutrients to move readily through the soil profile making them more available for plant roots.
The grow-master is fitted with double rollers which are angled in opposite directions. This reduces sideway drag on the tractor when ground engaging. Each roller can be adjusted for various degrees of angle from 2.5 to a maximum of 10 (four positions).
The maximum offset position is the most aggressive and is most often used for cultivation and for over-sowing new pasture seed. Ballast weight added to the frame will ensure that the tines are buried down to the hub.
Horsepower requirement is quite low with a minimum of only 35Hp required for the 2m unit. A tow hook is mounted on the back for dragging pasture harrows. 2 bolt gang adjustable to alter rotor angle.
Large floor plate deck for carrying ballast (weight) 100x100x6mm RHS Perimeter frame. Heavy Duty 2 triple sealed bearings. Double rollers allow machine to be angle for more aggressive cultivation.
Easy adjust mounting stands. Solid 75mm rotor. Roller is fitted with the same 2 heavy duty bearings used on the Berends Rotary Drain digger for over 30 years. The patented Shatter tines are 8 long and have a unique angle providing a much superior finish to conventional straight tines.
Product Specifications
Aerate, Renovate and Maintain 00 Neutral Setting
The axle is straight
This is used when the soil structure is very friable.
The tines will usually penetrate their full depth.
This setting is usually used to maintain the soil structure, possibly once a year in a maintenance program.
Aerate and Renovate 2.5 Setting
The axle has 2.5 degrees of angle
This is ideal for your first use of the aervator.
If your ground is hard the tines may not penetrate very far, maybe only 25-50 mm.
Dont worry, this is normal. Aeration is not a quick fix.
Aerate and Renovate 50 Setting
The axle has 5 degrees of angle
Use this setting for subsequent uses of the aervator.
With each pass you should change the direction of travel.
Across then diagonally is ideal.
Cultivate and Renovate 7.5 Setting
The axle has 7.5 degrees of angle
On this setting the aervator starts to get aggressive.
You may require additional weight or ballast to acheive maximum depth.
This setting is best used after previous passes and will fracture any compaction layer.
If used on extremely hard ground the tines will probably not penetrate very far.
Cultivate 100 Setting
The axle has 10 degrees of angle
On this setting the aervator is very aggressive.
Again use weight.
This setting is best used after previous passes and will fracture any compaction layer.
If used on hard ground the tines will probably not penetrate very far.
Optional
Trailing Wheelkit includes wheels, drawbar and hydraulic lift (0190)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GROWMASTER 3600 AERATORS - DOUBLE ROTOR - 0186

Made in UK
Suits Tractors 40 - 60 LPM, or 50 - 100hp
Features:
- Tie-rodless, solid body design
- Side mount for superior control and precision
- Fully serviceable using no specialist tools
- Line up and ram posts without digging
- Euro Hitch standard. Other hitches available at cost
Dimensions:
Weight = 135 kg
Max BPM = 1,250 BPM
Max energy per blow = 1200 J
Note:: 150 mm post driver Moil included. Other diameter (180mm, 200mm) Moils available at cost.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH POST RAMMER (40 - 60 LPM)

Burder Quick Change Upgrade (only) to suit MX when ordered with loader.
Includes Mounts to Suit on 1 Attachment.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER FEL QUICK CHANGE UPGRADE (SUIT MX)

Specifications:
Connection Type: Linkage
Min PTO HP: 40
PTO: 40 - 75HP: Series 4.
Product Weight (kg): 95
Gearbox Ratio: 23.18:1 clockwise rotation.
Clutch: 2 x 150mm friction plates (40/50HP), 2 x 200mm friction plates (75HP).
Main Frame: 75 x 75 x 4mm RHS (158PHD30), 100 x 100 x 5mm RHS.
Mounting: Cat. I TPL with Cat. II bushes supplied.
Effective Digging Depth: 1m.
Options:
DCA6 - 6"auger
DCA8 - 8" auger
DCA10 - 10" auger
DCA12 - 12" auger
Ideally suited for a variety of farming purposes including digging post holes and tree planting on lifestyle, medium acreage, broadacre, viticulture and horticultural farms.
Note: Augers are NOT SUPPLIED with the Post Hole Digger.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 40HP POST HOLE DIGGER (AUGERS NOT INCL)

CBM LOWER LINK LIFT ARM (CAT 3/3) (940MM LENGTH, RH FITTING)

Find Tractor Attachments For Sale. Browse 1830 Tractor Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Tractor Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

SPAREX LOWER LINK BALL, GUIDE CONE & LINCH PIN (CAT 3/3) (ID: 1 7/16'', OD: 2 17/32'', WIDTH: 1 3/4'')

CBM LEVELLING BOX ASSEMBLY (599MM MIN ADJUST)

JOHN BERENDS POST HOLE DIGGERS HYDRAULIC DOWN PRESSURE - 0262. 30-100 HP REQUIRED

SPAREX PEAR LINCH PIN (150 PCS. SMALL BUCKET) (11MM PIN DIA, 44.5MM TOTAL LENGTH)

CBM LOWER LINK LIFT ARM (CAT 3/2) (880MM LENGTH, RH FITTING)

NALAW PRO FENCER - NALAW - NPF

CBM TOP LINK HOOK REPAIR KIT (CAT 3)

JOHN BERENDS GROWMASTER 3600 AERATORS - DOUBLE ROTOR - 0186

HIMAC EURO HITCH POST RAMMER (40 - 60 LPM)

BURDER FEL QUICK CHANGE UPGRADE (SUIT MX)

SILVAN 40HP POST HOLE DIGGER (AUGERS NOT INCL)

CBM LOWER LINK LIFT ARM (CAT 3/3) (940MM LENGTH, RH FITTING)

Farm Supplies Machinery & Equipment

Dealer Address