Farm Supplies Machinery & Equipment

Merbein ploughs consist of left hand and right hand, two or three disc units attached to a range of toolbar sizes, to create just the right bed or channel for your needs.
This item includes:
Two 0522 units with x3 Discs each side plus one 0528 6ft (1.8m) Toolbar.
Please specify left or right hand when ordering. Left hand throws dirt to the left hand side and right hand throws dirt to the right hand side.
Also Available:
0536 Merbein rear coulter (one side only)
Please specify left or right hand when ordering. Left hand throws dirt to the left hand side and right hand throws dirt to the right hand side.
0528 6ft (1.8m) merbein toolbar
0530 7ft (2.1m) merbein toolbar
0532 8ft (2.4m) merbein toolbar
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MERBEIN PLOUGHS 3 DISCS PER SIDE WITH 6FT TOOLBAR - 0522 X2 INCL 0528

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions.
The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3830kg
No. of Bearings: 16
No. of axles: 8
Cutting width: 4.8m (15ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 40 PLATE X 26 INCH DISCS - 0963

Berends Linkage Offset Discs - Medium Duty
10 Plate - 18in x 4mm scallop discs
These medium duty offset discs are designed for small to medium size tractors. They are fitted with 28mm (1 1/8) square high tensile gang bolt axles and high quality triple sealed bearings.
The 10, 12, 14 and 16 plate machines have four bearings whilst the 18 plate has 6 bearings.
The 10 and 12 plate models are supplied with a single boom main frame with a support bar between the gangs whilst the 14-18 plate are supplied with a double boom main frame.
Adjustment is very simple, the U bolts which clamp the gangs on are simply loosened and the gangs can be adjusted laterally and for angle.
The standard set-up for an offset discs is the front gang running at a 21 angle whilst the rear gang is set at 23.
There is an art to setting up a disc, but if you have lateral and full angle adjustment - as these discs have - you are able to set a disc to give a level finish.
Features:
Disc type Scalloped Boron Coated
1 1/8 (28mm) square high tensile axles
Triple sealed bearings
10 and 12 plate models on single bar frame and 14 to 18 plate models on double bar frame.
Model:
0247 - 10 Plate - 18in x 4mm scallop discs
All prices include GST.
Dealer enquiries welcome.
Finance is now available.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MEDIUM DUTY OFFSET DISCS - 10 PLATE X 18 INCH DISCS - 0247, MIN 20HP

RM40 16 Plate Heavy Duty Trailing Offset 0820
The RM40 is one of the most popular of our wide range of offset and tandem disc cultivating ploughs.
Features:
Great digging ability ideal for primary and secondary tillage using 40Hp to 90HP tractors.
Twin pressure screws each side can be adjusted individually.
Easy gang adjustment for the perfect level finish.
Solid cast spools individually machined to suit the disc for extra strength.
Triple sealed bearings.
230mm (9 inch) disc spacing.
Fitted with 560mm x 5mm (22 inch x 3/16 inch) scalloped discs.
28mm square high tensile gang bolts.
Weight where it counts - in the gang - not ballast on the frame (which adds load to the bearings) like most other machines.
Prong type scrapers are standard equipment formed scrapers available on request.
Fully adjustable drawbar adjustable offset ideal for orchards.
Fitted with Holden type tyres.
Specifications:
Approx Weight 990kg
No. Bearings 6
Cutting Width 1.83m (6ft)
No. Axles 2
Options:
0951 Optional Jack
0953 Optional Furrow filler (not sold separately)
* Upgrade to 24 inch x 5mm discs POA

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM40 16 PLATE HEAVY DUTY TRAILING OFFSET - 0820, SUIT 40-90HP

Designed for small to medium size tractors.
Popular cultivation tool used to break up soil for preparing crops or controlling weeds. Discs can cut up and mix in trash, are very hard wearing, long lasting and easy to use.
Fitted with 28mm (1 1/8in) square high tensile gang bolt axles and high quality triple sealed bearings.
14-18 plate models fitted with 75x75x6mm double beam whilst 10-12 plate models are fitted with main single beam and angle support bracket.
Cat 1/2 linkage.
Clamped on by U-bolts for simple adjustment.
Bellota Boron discs are manufactured under strict quality specifications that ensure the right hardness and uniformity throughout the disc. This includes clamp hardening to prevent distortion, lathe turning of the edges and hardened to 50HRc for low wear and long life.
Features:
No of Discs 12
Disc Diameter 500mm (20inch)
Disc Thickness 4mm
HP (min) 25HP
No. Bearings 4
Working Width 1350mm (4ft 6in)
Weight 335kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MEDIUM DUTY OFFSET DISCS - 12 PLATE X 20 INCH DISCS - 0248, MIN 25HP

Merbein ploughs consist of left hand and right hand, two or three disc units attached to a range of toolbar sizes, to create just the right bed or channel for your needs.
Merbein ploughs can also be fitted with just a single two or three disc unit, balanced by a coulter. 6ft, 7ft and 8ft Toolbars are available.
Plough assemblies adjustable for width along the toolbar to either mound beds or reversed to form shallow channels. Should only be operated in cultivated soil.
This item includes:
Two 0520 units with x2 Discs each side plus one 0532 8ft (2.4m) Toolbar.
Please specify left or right hand when ordering. Left hand throws dirt to the left hand side and right hand throws dirt to the right hand side.
Also Available:
0536 Merbein rear coulter (one side only)
Please specify left or right hand when ordering. Left hand throws dirt to the left hand side and right hand throws dirt to the right hand side.
0528 6ft (1.8m) merbein toolbar
0530 7ft (2.1m) merbein toolbar
0532 8ft (2.4m) merbein toolbar
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MERBEIN PLOUGHS 2 DISC PER SIDE WITH 8FT TOOLBAR - 0520 X2 INCL 0532

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions.
The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 2120kg
No of bearings: 8
No of axles: 4
Cutting width: 3.2m (10ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 24inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2190kg
No of bearings: 12
No of axles: 6
Cutting width: 3.2m (10ft 6inch)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM80 HD TRAILING OFFSET 28 PLATE 24 INCH 5MM SCALLOP DISCS - 0852

Designed for extremely tough conditions and is one of the strongest linkage disc ploughs available. Heavy weighted gangs provide excellent digging ability.
Features:
Each machine takes approximately 2-3HP per disc to pull, depending on conditions.
Prong scrapers are also available for heavy clay soil.
Twin spring loaded pressure screws prevent damage in rocky or undulating conditions.
Easy gang angle adjustment.
Fitted with hard wearing European Bellota Boron discs at 9 inch spacing. Available in 22x5mm(or optional 24x5mm sizes).
Cat 1 & 2 linkage.
28mm square high tensile axles.
Greaseable flanged disc bearings with excellent sealing to exclude contaminants.
Solid cast spools, individually machined, provide all the weight in the gangs rather than in the frame (which can add load onto the bearings.
Specifications:
Disc Size 22inch dia, 5mm thick, Scallop Disc
Approx Weight- 820kg
No. Bearings 6
No. Axles 2
Cutting Width 2.06m(6ft 9inch)
Options:
0947 Optional Scrapers suit 18 plate GM40.
0953 Optional Furrow filler (not sold separately).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GM40 18 PLATE HEAVY DUTY OFFSET DISCS - 0810, 2-3HP PER DISC

Features:
- 150 x 100 x 8mm chassis
- 200 x 120 x 8mm gang beams
- 26 (660mm) scalloped discs on this CVH-66 model (6mm thick)
- Disc scrapers
- 9 (235mm) spacing
- Eight double taper roller bearings with a 5 year warranty
- Reinforced bearing protectors
- Manual gang angle adjustment from 8 - 24 degrees
- Manual fore/aft adjustment with spring
- 40mm square silicon manganese steel disc axles
- 400 / 60 x 15.5 flotation tyres
- Swivel hitch
Super heavy offset discs for demanding agricultural and cropping applications. High quality French manufactured with a 5 year bearing warranty.
Working Width = 3,550 mm
Overall Width = 3,800 mm
Required HP Range = 160 - 210 hp
Weight = 2,995 kg
Number of Discs = 32
Options available:
- Hydraulic fore/aft adjustment
- Hydraulic drawbar adjustment
- Hydraulic gang angle adjustment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GB 3.55M, 32 DISCS (160-210HP) HEAVY DUTY OFFSET DISCS

Merbein ploughs consist of left hand and right hand, two or three disc units attached to a range of toolbar sizes, to create just the right bed or channel for your needs.
Merbein ploughs can also be fitted with just a single two or three disc unit, balanced by a coulter. 6ft, 7ft and 8ft Toolbars are available.
Plough assemblies adjustable for width along the toolbar to either mound beds or reversed to form shallow channels. Should only be operated in cultivated soil.
This item includes:
Two 0520 units with x2 Discs each side plus one 0530 7ft (2.1m) Toolbar.
Please specify left or right hand when ordering. Left hand throws dirt to the left hand side and right hand throws dirt to the right hand side.
Also Available:
0536 Merbein rear coulter (one side only)
Please specify left or right hand when ordering. Left hand throws dirt to the left hand side and right hand throws dirt to the right hand side.
0528 6ft (1.8m) merbein toolbar
0530 7ft (2.1m) merbein toolbar
0532 8ft (2.4m) merbein toolbar
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MERBEIN PLOUGHS 2 DISC PER SIDE WITH 7FT TOOLBAR - 0520 X2 INCL 0530

Strong compact tandem disc ideal for vineyards, orchards and horticulture.
Features:
Excellent digging ability.
Easy ratchet gang adjustment.
Available in 16, 20 and 24 plate models.
Buster tine removes centre ridge to create a level finish.
Solid cast spools are individually machined to suit the disc for extra strength.
230mm (9 inch) spacing.
Fitted with 560mm x 5mm (22 inches x 3/16 inch) scalloped discs as standard.
28mm square high tensile gang bolts.
Triple sealed bearings.
Options:
0946 Optional Scrapers suit 16 plate TH30
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH30 16 PLATE HEAVY DUTY TANDEM DISCS - 0814

Find Offset Discs Tillage And Seeding Equipment For Sale from Farm Supplies Machinery & Equipment.

New & Used Offset Discs Tillage And Seeding Equipment For Sale

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS MERBEIN PLOUGHS 3 DISCS PER SIDE WITH 6FT TOOLBAR - 0522 X2 INCL 0528

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 40 PLATE X 26 INCH DISCS - 0963

JOHN BERENDS MEDIUM DUTY OFFSET DISCS - 10 PLATE X 18 INCH DISCS - 0247, MIN 20HP

JOHN BERENDS RM40 16 PLATE HEAVY DUTY TRAILING OFFSET - 0820, SUIT 40-90HP

JOHN BERENDS MEDIUM DUTY OFFSET DISCS - 12 PLATE X 20 INCH DISCS - 0248, MIN 25HP

JOHN BERENDS MERBEIN PLOUGHS 2 DISC PER SIDE WITH 8FT TOOLBAR - 0520 X2 INCL 0532

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

JOHN BERENDS RM80 HD TRAILING OFFSET 28 PLATE 24 INCH 5MM SCALLOP DISCS - 0852

JOHN BERENDS GM40 18 PLATE HEAVY DUTY OFFSET DISCS - 0810, 2-3HP PER DISC

GB 3.55M, 32 DISCS (160-210HP) HEAVY DUTY OFFSET DISCS

JOHN BERENDS MERBEIN PLOUGHS 2 DISC PER SIDE WITH 7FT TOOLBAR - 0520 X2 INCL 0530

JOHN BERENDS TH30 16 PLATE HEAVY DUTY TANDEM DISCS - 0814

Farm Supplies Machinery & Equipment

Dealer Address