Farm Supplies Machinery & Equipment

Note: This model does not include a crumbler, however, it is available as an option. The second & third picture of this listing shows the cultivator with a crumbler.
Features:
Heavy duty model features a 50×50 RHS frame throughout with larger tines, providing a heavier and more rigid machine for hard ground and primary cultivation.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16) tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 16
Tine Size: 45mm x 12mm
Frame Size: 50mm x 50mm RHS
Tractor HP Guide: 3HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Solid Rubber Depth Wheels
HD Tine helpers
2.4m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 2.4M S-TINE (16 TINES) HEAVY DUTY CULTIVATOR - MIN 48HP

5 leg Subsoiler with tines & discs up to 450mm working depth. Made in new Zealand.
304 Auto Reset Panerazers are the ultimate sub soiling machine. Especially when the soils to be aerated are heavy & full of obstructions.
Being auto reset makes your sub soiling job seamless as the legs simply lift over any obstruction & immediately reset automatically so you can continue aerating your soils without stopping. Leaf spring reset has a great advantage over rams, not only do they require less maintenance, but the legs are at the highest point of resistance while in the ground & resistance reduces as they lift.
This ensures the legs do not tip falsely but ensures they do clear obstructions when struck.
Rata Panerazer legs are in a 'V' formation. This reduces drag between the legs making it easier to pull and uses less fuel. V formation also means the legs leave the ground independently at the headlands which eliminates 'heaving'.
They feature a heavy duty build RHS main frame construction with reinforcing to cope with hard conditions. The wear protected legs are also securely bolted into the reset mounts.
Working depth is easily controlled via the rear roller setting and tractor 3 point linkage. The rear roller is secured to the main aerator frame with heavy machine pins.
The rear roller is securely mounted into a sealed bearing to ensure smooth operation with minimal wear. The roller is also kept clean by a scraper mounted just behind it.
An innovative modular leg, foot & point assembly provides maximum flexibility of parts. Cast point provides extra wear protection in the form of bevelled hard wearing plate.
Winged feet are an option on the Rata Panerazer range (see photos attached). These provide extra ground lift when sub soiling to create greater subsoil disturbance.
The auto reset system is powered by heavy duty leaf springs mounted on each leg. Leaf springs reset immediately after tripping & clearing the obstacle unlike other reset systems such as hydraulic. This tension is easily adjusted via the 'tension bolt' mounted on the leg. This enables the operator to adjust the tension to the ideal level required for the ground they're operating in. The tension adjustment spanner is included with the implement.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 5 LEG (AUTO RESET) SUBSOIL CULTIVATOR (120HP RECOMMENDED)

Cultivator - 3 Row 190
Cultivators are a secondary tillage product, for preparing seedbeds, and controlling weeds.
3 and 4 row models available with heavy duty S tines set up with trash flow pattern.
With the addition of a Bracket a Daken C Seeder can be mounted making it a simple but effective sowing device.
Features:
- Strong rugged construction
- Trash flow tine pattern
- Suits Cat 1 & 2
- C seeder bracket supplied
- 12mm heavy duty S tines
- 3 and 4 rows
- Suitable to have C Seeder mounted
- Tines mounted approx. every 300mm
- 2 Year Warranty
- Weight: 186kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN CULTIVATOR MODEL 3 ROW 190 GALVANIZED - 03019DC

Note: This model does not include a crumbler, however, it is available as an option. The second & third picture of this listing shows the cultivator with a crumbler.
Features:
Heavy duty model features a 50×50 RHS frame throughout with larger tines, providing a heavier and more rigid machine for hard ground and primary cultivation.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16) tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 24
Tine Size: 45mm x 12mm
Frame Size: 50mm x 50mm RHS
Tractor HP Guide: 3HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Solid Rubber Depth Wheels
HD Tine helpers
3.6m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3.6M S-TINE (24 TINES) HEAVY DUTY CULTIVATOR - MIN 72HP

CP270 Chisel plough, 50x25 tyne, coil spring, t bold - 9 tynes.
Designed for light (ST) to medium-heavy (STH) or extra heavy (CT, CP) cultivation, row cropping, ploughing, raking and initial working of new country.
Assists in controlling weed growth and surface water penetration.
Tynes can be re-arranged on tool bars and additional tynes can be added to suit any application.
Features:
- 25mm square tynes
- Easy tyne placement/adjustment
- Reversible points (doubling point life)
- Solid steel DURAX frame
- 65mm solid steel double toolbar
- 50x25mm spring steel chisel tynes
- Strong fabricated tyne clamp
Specifications:
- 9 Tynes
- 2.7m Width
- Weight: 490kg
- 60hp power req
- Cat 1/2 linkage
Options:
- Additional tynes
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS 2.7M CHISEL PLOUGH WITH COIL SPRING & T BOLT- 9 TYNE, 60HP - CP270

Crumbler Roller maintains cultivation depth and levelling out clumps and clods behind cultivator.
Designed to crush dirt clods
Heavy duty construction.
High quality greasable bearings for minimum downtime
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3M CRUMBLER (ONLY) TO SUIT S-TINE CULTIVATOR

9 leg Subsoiler with tines & discs up to 450mm working depth. Made in new Zealand.
Rata Panerazer subsoilers are designed specifically for use in ground where compaction has occurred. All Rata subsoil aeration equipment features a double bar V frame construction for a better job and easier pulling.
Check out the video to see them in operation and the finish after use.
Rata Panerazer legs are in a 'V' formation. This reduces drag between the legs making it easier to pull and uses less fuel. V formation also means the legs leave the ground independently at the headlands which eliminates 'heaving'.
They feature a heavy duty build with 16mm wear protected legs securely bolted into mounts that are completely welded and gusseted onto the heavy RHS mainframe for strength.
Working depth is easily controlled via the rear roller setting and tractor 3 point linkage. The rear roller is secured to the main aerator frame with heavy machine pins.
The rear roller is securely mounted into a sealed bearing to ensure smooth operation with minimal wear. The roller is also kept clean by a scraper mounted just behind it.
An innovative modular leg, foot & point assembly provides maximum flexibility of parts. Cast point provides extra wear protection in the form of bevelled hard wearing plate.
Winged feet are an option on the Rata Panerazer range (see photos attached). These provide extra ground lift when sub soiling to create greater subsoil disturbance.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 9 TINE/DISC SUBSOIL CULTIVATOR (190HP RECOMMENDED)

Note: This model does include a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 32
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3.2M S-TINE (32 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 64HP

Cultivator - Crumbler Roller for Model 190
Cultivators are a secondary tillage product, for preparing seedbeds, and controlling weeds.
3 and 4 row models available with heavy duty S tines set up with trash flow pattern.
With the addition of a Bracket a Daken C Seeder can be mounted making it a simple but effective sowing device.
Features:
- Strong rugged construction
- Trash flow tine pattern
- Suits Cat 1 & 2
- C seeder bracket supplied
- 12mm heavy duty S tines
- 3 and 4 rows
- Suitable to have C Seeder mounted
- Tines mounted approx. every 300mm
- 2 Year Warranty
- Weight: 99kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN CRUMBLER ROLLER (ONLY) FOR CULTIVATOR MODEL 190CR - 03200DC

Cultivator - 3 Row 150
Cultivators are a secondary tillage product, for preparing seedbeds, and controlling weeds.
3 and 4 row models available with heavy duty S tines set up with trash flow pattern.
With the addition of a Bracket a Daken C Seeder can be mounted making it a simple but effective sowing device.
Features:
- Strong rugged construction
- Trash flow tine pattern
- Suits Cat 1 & 2
- C seeder bracket supplied
- 12mm heavy duty S tines
- 3 and 4 rows
- Suitable to have C Seeder mounted
- Tines mounted approx. every 300mm
- 2 Year Warranty
- Weight: 165kg - 15 Tines total 5 per row
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN CULTIVATOR MODEL 3 ROW 150 GALVANIZED - 03015DC

Note: This model does include a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 20
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 2M S-TINE (20 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 40HP

Note: This model does not include a crumbler, however, it is available as an option. The second picture of this listing shows the cultivator with a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 24
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
2.4m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 2.4M S-TINE (24 TINES) STANDARD CULTIVATOR - MIN 48HP

Find Cultivators For Sale from Farm Supplies Machinery & Equipment.

New & Used Cultivators For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS 2.4M S-TINE (16 TINES) HEAVY DUTY CULTIVATOR - MIN 48HP

RATA 5 LEG (AUTO RESET) SUBSOIL CULTIVATOR (120HP RECOMMENDED)

DAKEN CULTIVATOR MODEL 3 ROW 190 GALVANIZED - 03019DC

JOHN BERENDS 3.6M S-TINE (24 TINES) HEAVY DUTY CULTIVATOR - MIN 72HP

JARRETT IMPLEMENTS 2.7M CHISEL PLOUGH WITH COIL SPRING & T BOLT- 9 TYNE, 60HP - CP270

JOHN BERENDS 3M CRUMBLER (ONLY) TO SUIT S-TINE CULTIVATOR

RATA 9 TINE/DISC SUBSOIL CULTIVATOR (190HP RECOMMENDED)

JOHN BERENDS 3.2M S-TINE (32 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 64HP

DAKEN CRUMBLER ROLLER (ONLY) FOR CULTIVATOR MODEL 190CR - 03200DC

DAKEN CULTIVATOR MODEL 3 ROW 150 GALVANIZED - 03015DC

JOHN BERENDS 2M S-TINE (20 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 40HP

JOHN BERENDS 2.4M S-TINE (24 TINES) STANDARD CULTIVATOR - MIN 48HP

Farm Supplies Machinery & Equipment

Dealer Address