Farm Supplies Machinery & Equipment

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3680kg
No. of Bearings: 16
No. of axles: 8
Cutting width: 4.33m (14ft 3inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 36 PLATE X 26 INCH DISCS - 0962

Series 39 Hydraulic folding wing frame with 6 section folding S44 Broadacre Stump Jump Harrow. 5.1m coverage. Transport width: 3.6m.
Please note that 3 point linkage pins are not supplied.
Murray Series 39 Hydraulic Folding Harrow Frames provide a solution to the transportation of multiple Harrow sections.
Designed to fit Category I or II three-point linkage systems, Murray Series 39 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and hydraulic folded wings.
Murray Series 39 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Series 39 Folding Harrow Frames are supplied complete with centre section, wing attachments and all rings and links to suit your harrow type and size.
Specifications:
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 5.1M HYDRAULIC FOLDING FRAME BROADACRE STUMP JUMP HARROW

Murray Series 32 20 Disc Harrow - Offset Tandem 2.28m..
The Murray Series 32 Disc Harrow is an excellent choice for soil preparation and breaking up virgin land. Built heavy duty, the tandem disc setup combines rugged capabilities with smart features.
The durable box frame is built in two parts, with a pivot point that is able to be locked providing different working configurations. It supports four gangs of discs two front and two rear. Gang angles can be individually adjusted by way of crank screws to suit different conditions. The angle can be adjusted between 0 and 20 degrees to vary the aggression of cultivation. Disc gangs are mounted on sealed-for-life bearings set in rubber. No greasing is required which minimises unproductive maintenance downtime.
In a standard form the Series 32 is a four gang Disc Harrow for use with light to medium powered tractors. By removing the rear frame section and gangs, the Series 32 becomes a handy two-gang implement for light work. Alternatively, the rear frame section and gangs can be pivoted upwards to provide additional weight for penetration by the leading two gangs in heavier conditions. Under uneven ground conditions, the rear frame section and gangs can be allowed to float over undulations for even cultivation.
The Murray Series 32 Disc Harrow is a three-point linkage mounted implement suitable for Cat II hitches. It is supplied complete with fittings and fasteners including linkage pins and clips. Available in two popular sizes 16 discs covering around 1.83 metres (6ft) and a 20 disc model covering 2.28 metres (7ft 6in) approx.
Under certain conditions Disc Harrows can throw up a furrow between the inner discs. The option of a centre spring tine is available which will maintain a level finished behind the harrow in these situations. Optional sets of blade scrapers are also available to keep discs clean and working efficiently in wet or sticky conditions.
Features:
- Available in 16 Disc or 20 Disc models
- Suitable for Cat II systems
- Adjustable gangs from 0 20 degrees
- Sealed for life bearings
- 559mm (22 inch) scalloped discs
- Removable/ pivot rear frame section
Specifications:
- Coverage (m): 2.28
- Coverage (ft in): 7.6
- Power Requirement: 40 to 65 hp
- Standard Discs: 22 Scalloped Flatback Discs
- Weight (kg): 552
Optional Equipment:
- Scraper set: 16 Disc- 43kg
- Scraper set: 20 Disc - 54kg
- Spring Tooth Centre Tine assembly (1)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 2.28M 20 DISC HARROW - OFFSET TANDEM

Heavy Duty robust constructed rotary hoe suitable for tractors up to 140 hp. Available with three different rotor options - hoe, spike or antipan.
Spike and antipan rotors are supplied with faster rotor speeds.
Specifications for Pioneer 140F-305:
Actual Width: 332cm
Working Width: 310cm
Required HP: 115-140hp
Weight: 935kg
No of Blades: 72
Features:
Rated up to 140hp
540rpm (four speed) or 1000 rpm (two speed) gearbox
Swinging lower links
Gear side drive
80x8mm L blades
6 blades per flange
250mm working depth
Side skids
Two piece adjustable, spring loaded frangor tailgates
Foot stand
Slip clutch
Options In Lieu of Standard:
Rotor Options:
Spike or Anti-Pan in lieu of hoe rotor (30x30x170mm or 10mm blade)
Pioneer 255 = 1145kg with cage, 1265kg with packer, 50 blades
Pioneer 280 = 1220kg with cage, 1340kg with packer, 55 blades
Pioneer 305 = 1295kg with cage, 1420kg with packer, 60 blades
Roller Options:
Cage Roller (440mm diameter)
Ergon 255
Ergon 280
Erogon 305
Packer Roller (470mm diameter)
Ergon 255
Ergon 280
Erogon 305
Accessories:
Automatic cut-out clutch (Cam) - All models
Hydraulic adjustment for rear roller - All models
Hydraulic tailgate adjustment - All models
Oil Cooler kit - All models
Bolt on double flange kit (per flange) - All models
'C' (speed) blades in lieu of 'L' blades - All models
Rear steel wheels - All models
Models:
PIONEER140F-255 260cm Working width 105-140hp 845kg 60 Blades
PIONEER140F-280 280cm Working width 110-140hp 890kg 66 Blades
PIONEER140F-305 310cm Working width 115-140hp 935kg 72 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.1M (115-140HP) PIONEER ROTARY HOE 140F-305

Medium duty rotary hoe with gear side drive. Suitable for tractors up to 55 hp. (4 Speed)
Specifications:
Actual Width: 200cm
Working Width: 185cm
Required HP: 35hp
Weight: 342kg
No of Blades: 42
Features:
Rated up to 55hp
Single speed gearbox
540 rpm
Side gear drive
70 x 7mm "L" blades
200mm working depth
Side-skids
Foot stand
Slip clutch
Models:
APLHA 155 160cm Working Width 25-55hp 310 kg 36 Blades
APLHA 165 175cm Working Width 25-55hp 322 kg 36 Blades
APLHA 185 185cm Working Width 30-55hp 330 kg 42 Blades
APLHA 155 155cm Working Width 35-55hp 342 kg 42 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.85M (55HP GEARBOX) ALPHA ROTARY HOE (4 SPEED)

Features Include:
220HP two speed gearbox (1000 RPM).
Phased rotors.
Stone protection system.
Leveling bar standard.
Floating side shields.
4380mm working width.
100 300mm Working depth.
1 3/8in 6 spline PTO with slip clutch.
Phased Rotor Benefits:
Reduces the absorption of power and fuel consumption.
Eliminates vibrations.
Better soil crumbling.
MF220-450CR Specifications (with Cage Roller)
Connection Type: Linkage
Min Tractor PTO HP: 180-220 HP
No. of Blades: 36
Working Width (mm): 4380
Product Weight (kg): 1730
Total Width (mm): 4440
MF220-450PR Specifications (with optional Packer Roller):
Connection Type: Linkage
Min Tractor PTO HP: 180-220 HP
No. of Blades: 36
Working Width (mm): 4380
Product Weight (kg): 1960
Total Width (mm): 4440
Factory Options:
Wheel Track Eradicator
Superfast Blades
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI MEKFARMER 220 POWER HARROWS 4.38M - BREVIGLIERI - MF220-450CR, MIN 180-220HP

Rigid box construction rotary hoes suitable for small-medium sized farms and market gardens, preparation of ground and working in stubble and crop
residues.
Features:
35 HP single speed gearbox.
1,830 mm working width.
Side gear drive
54 x C blades
6 blades per flange
Cat I or II three point linkage.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 25-35 HP
Working Width (mm): 1830
Working Depth (mm): 50-150
Product Weight (kg): 320
Total Width (mm): 1990
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 1.83M B30F ROTARY HOE (MIN 25-35HP)

2.79m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3503 - 2.79m (9ft 2in) 4/12 Tine - 50kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 2.79M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Merbein ploughs consist of left hand and right hand, two or three disc units attached to a range of toolbar sizes, to create just the right bed or channel for your needs.
This item includes:
Two 0522 units with x3 Discs each side plus one 0530 7ft (2.1m) Toolbar.
Please specify left or right hand when ordering. Left hand throws dirt to the left hand side and right hand throws dirt to the right hand side.
Also Available:
0536 Merbein rear coulter (one side only)
Please specify left or right hand when ordering. Left hand throws dirt to the left hand side and right hand throws dirt to the right hand side.
0528 6ft (1.8m) merbein toolbar
0530 7ft (2.1m) merbein toolbar
0532 8ft (2.4m) merbein toolbar
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MERBEIN PLOUGHS 3 DISCS PER SIDE WITH 7FT TOOLBAR - 0522 X2 INCL 0530

Series 08 - 3.45m Stump Jump Harrow 3 Point Linkage Hoist Lift Type (4 point pull) featuring Series 21 Hoist Frame - Complete Set.
Please note 2nd picture shows how harrows are attached to frame, but the harrows in that picture are not stump jump harrows. Picture is for example only.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Series 21 3-Point Linkage Hoist Frame.
8030 - 4 section 3.45m (11ft 4in) - 272kg.
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 3.45m (11ft 4in).
- Weight 272kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 3.45M STUMP JUMP HARROW COMPLETE SET - 3PL HOIST LIFT TYPE (4 POINT PULL)

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage with 60 -130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1930kg
No of bearings: 8
No of axles: 4
Cutting width: 2.74m (9ft)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

Heavy duty model features a 50×50 RHS frame throughout with larger tines, providing a heavier and more rigid machine for hard ground and primary cultivation.

Note: This model does include a crumbler.

JOHN BERENDS 2.4M S-TINE (16 TINES) HEAVY DUTY CULTIVATOR (WITH CRUMBLER) - MIN 48HP

Find Tillage AND Seeding For Sale in Queensland. Browse 984 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 36 PLATE X 26 INCH DISCS - 0962

MURRAY 5.1M HYDRAULIC FOLDING FRAME BROADACRE STUMP JUMP HARROW

MURRAY 2.28M 20 DISC HARROW - OFFSET TANDEM

CELLI 3.1M (115-140HP) PIONEER ROTARY HOE 140F-305

CELLI 1.85M (55HP GEARBOX) ALPHA ROTARY HOE (4 SPEED)

BREVIGLIERI MEKFARMER 220 POWER HARROWS 4.38M - BREVIGLIERI - MF220-450CR, MIN 180-220HP

BREVIGLIERI 1.83M B30F ROTARY HOE (MIN 25-35HP)

MURRAY SERIES 03 LEVELLING HARROW 2.79M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

JOHN BERENDS MERBEIN PLOUGHS 3 DISCS PER SIDE WITH 7FT TOOLBAR - 0522 X2 INCL 0530

MURRAY 3.45M STUMP JUMP HARROW COMPLETE SET - 3PL HOIST LIFT TYPE (4 POINT PULL)

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

JOHN BERENDS 2.4M S-TINE (16 TINES) HEAVY DUTY CULTIVATOR (WITH CRUMBLER) - MIN 48HP

Farm Supplies Machinery & Equipment

Dealer Address