Farm Supplies Machinery & Equipment

Consuming 100,000 tons of high quality Swedish steel annually, UNIA is the largest manufacturer of agricultural machines in Poland with nearly 25,000 machines sold per year, of which over 10,000 are exported to 60 countries around the world, including right here in Australia.
Designed for pre-sowing and stubble tillage.
Based on 2 rows of discs that provide easy cutting of the soil intense mixing any plant residues with hay.
Can operate as seedbed combination unit due to the possibility of extending it of a carriage with draw-bar for the semi-mounted version.
High area performance at low fuel consumption and low wearing rate.
Possibility of extension to the semi-mounted or Drive versions (on the tyre and transport roller, ø670 mm).
Features :
Weight With Roller: 3,630 KG
Power Demand: 170-210 HP
No. Of Discs: 48
Suspension axle: 70-825/36 mm
2 rows of 560/4 mm Classic toothed discs, protected by 35x190mm or 42×160 mm shock absorbers (version 4H)
Maintenance-free hub with triple lip seals
600 mm pipe roller
Mechanical / Hydraulic adjustment of working depth
Row of spring levelling fingers
Rigid frame (versions 34)
Hydraulically folded frame (versions H 4 H 7.5)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

UNIA ARES XL 6M CUT SPEED DISC CULTIVATOR - UNIA - ARESXL6H, 170-210HP

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3500kg
No. of Bearings: 16
No. of axles: 8
Cutting width: 3.88m (12ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 32 PLATE X 26 INCH DISCS - 0961

5.4m with 54 tines, crumblers, solid rubber tyres and hydraulic lift.
Features:
Working width: 5.4m.
Fitted with 54 tines at 100mm centres.
Fitted with crumbler for a superior finish.
Fitted with solid rubber tyres, no risk of punctures and improved capacity.
Transport width when folded: 3.5m
Folding wings which offer two alternative positions: floating to follow the contour of the ground being worked, or locked to assist penetration in hard ground.
Choice of four different points for different applications.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS FOLDING WING S-TINE CULTIVATOR 5.4M - 0319

Series 39 Hydraulic folding wing frame with 6 section folding S04 Diamond Harrow. 5.97m coverage. Transport width: 3.6m.
Please note that 3 point linkage pins are not supplied.
Murray Series 39 Hydraulic Folding Harrow Frames provide a solution to the transportation of multiple Harrow sections.
Designed to fit Category I or II three-point linkage systems, Murray Series 39 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and hydraulic folded wings.
Murray Series 39 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Series 39 Folding Harrow Frames are supplied complete with centre section, wing attachments and all rings and links to suit your harrow type and size.
Specifications:
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 5.97M HYDRAULIC FOLDING FRAME DIAMOND HARROW

CS Series Linkage disc cultivator 1.8m, 16 plate x 22 inch discs.
Designed for light-medium (BS) and medium-heavy (CS) secondary tillage applications, such as orchard and vegetable farming, general farming, weed control and fire breaks.
Features:
- Spring-mounted headstock (BS)
- Square DURAX axles
- Triple sealed, self-aligning bearings
- Gang angle adjustment for tillage control (CS)
Specifications:
- 22 inch discs
- 16 discs
- Weight: 550kg
- 1.8m cut
- 50hp required
- Cat 1 linkage.
Options:
- Trash scraper set
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS 1.8M LINKAGE DISC CULTIVATOR CS SERIES 22INCH DISCS

Merbein ploughs consist of left hand and right hand, two or three disc units attached to a range of toolbar sizes, to create just the right bed or channel for your needs.
This item includes:
Two 0522 units with x3 Discs each side plus one 0528 6ft (1.8m) Toolbar.
Please specify left or right hand when ordering. Left hand throws dirt to the left hand side and right hand throws dirt to the right hand side.
Also Available:
0536 Merbein rear coulter (one side only)
Please specify left or right hand when ordering. Left hand throws dirt to the left hand side and right hand throws dirt to the right hand side.
0528 6ft (1.8m) merbein toolbar
0530 7ft (2.1m) merbein toolbar
0532 8ft (2.4m) merbein toolbar
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MERBEIN PLOUGHS 3 DISCS PER SIDE WITH 6FT TOOLBAR - 0522 X2 INCL 0528

4.64m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3411 - 4.64m (15ft 3in) - 4/9 Tine, 2/12 Tine - 88kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 4.64M, 3 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles. Ideal for primary and secondary tillage for 60HP -130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1725kg
No of bearings: 8
No of axles: 4
Cutting width: 2.5m (8ft 3inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 22 PLATE 5MM DISCS - 0844, SUIT 60-130HP

Features:
- 150 x 100 x 8mm chassis
- 200 x 120 x 8mm gang beams
- 28 (710mm) scalloped discs on this CVH-71 model (8mm thick)
- Disc scrapers
- 10 (260mm) disc spacing
- Eight double taper roller bearings with a 5 year warranty
- Reinforced bearing protectors
- Manual gang angle adjustment from 8 - 24 degrees
- Manual fore/aft adjustment with spring
- 40mm square silicon manganese steel disc axles
- 400 / 60 x 15.5 flotation tyres
- Swivel hitch
Super heavy offset discs for demanding agricultural and cropping applications. High quality French manufactured with a 5 year bearing warranty.
Working Width = 3,200 mm
Overall Width = 3,450 mm
Required HP Range = 160 - 220 hp
Weight = 2,840 kg
Number of Discs = 26
Options available:
- Hydraulic fore/aft adjustment
- Hydraulic drawbar adjustment
- Hydraulic gang angle adjustment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GB 3.2M, 26 DISCS (160-220HP) HEAVY DUTY OFFSET DISCS

2.56m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3602 - 2.56m (8ft 5in) 1/12 Tine, 2/16 Tine - 56kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 2.56M, 4 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

3.02m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3605 - 3.25m (10ft 8in) 2/12 Tine, 2/16 Tine - 74kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 4 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

Medium duty rotary hoe suitable for tractors up to 120hp.
Specifications:
Actual Width: 207cm
Working Width: 185cm
Required HP: 70-120hp
Weight: 650kg
No of Blades: 42
Features:
Rated up to 120hp
PTO 540rpm 4 speed gearbox (155-180 models)
PTO 1000rpm 2 speed gearbox (205-305 models)
Swinging lower links
Gear side drive
80x7mm L blades
6 blades per flange
250mm working depth
Side skids
Adjustable scroll tailgate
Foot stand
Slip clutch
Options In Lieu of Standard:
Rotor Options:
Spike rotor (30x30x170mm spikes) c/w 2 piece adjustable tailgate (180-305 only)
Anti-pan (straight blade) rotor c/w 2 piece adjustable tailgate (180-305 only)
Roller Options:
Cage Roller (385mm diameter)
Ergon 155 = 860kg with roller
Ergon 180 = 880kg with roller
Ergon 205 = 920kg with roller
Cage Roller (440mm diameter)
Ergon 230 = 980kg with roller
Ergon 255 = 1050kg with roller
Ergon 280 = 1110kg with roller
Ergon 305 = 1180kg with roller
Packer Roller (420mm diameter)
Ergon 155 = 920kg with roller
Ergon 180 = 1000kg with roller
Ergon 205 = 1080kg with roller
Packer Roller (470mm diameter)
Ergon 230 = 1160kg with roller
Ergon 255 = 1240kg with roller
Ergon 280 = 1300kg with roller
Ergon 305 = 1380kg with roller
Accessories:
Automatic cut-out clutch (Cam) - All models
Hydraulic adjustment for rear roller - All models
Bolt on double flange kit (per flange) - All models
'C' (speed) blades in lieu of 'L' blades - All models
Rear steel wheels - All models
Models
ERGON120-155 160cm Working width 60-120hp 600kg 36 Blades
ERGON120-180 185cm Working width 70-120hp 650kg 42 Blades
ERGON120-205 210cm Working width 75-120hp 690kg 48 Blades
ERGON120-230 235cm Working width 80-120hp 733kg 54 Blades
ERGON120-255 260cm Working width 85-120hp 770kg 60 Blades
ERGON120-280 285cm Working width 90-120hp 800kg 66 Blades
ERGON120-305 310cm Working width 100-120hp 880kg 72 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.85M (70-120HP) ERGON ROTARY HOE

Find Tillage AND Seeding For Sale in Queensland. Browse 984 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Queensland

Farm Supplies Machinery & Equipment

Sale Price

UNIA ARES XL 6M CUT SPEED DISC CULTIVATOR - UNIA - ARESXL6H, 170-210HP

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 32 PLATE X 26 INCH DISCS - 0961

JOHN BERENDS FOLDING WING S-TINE CULTIVATOR 5.4M - 0319

MURRAY 5.97M HYDRAULIC FOLDING FRAME DIAMOND HARROW

JARRETT IMPLEMENTS 1.8M LINKAGE DISC CULTIVATOR CS SERIES 22INCH DISCS

JOHN BERENDS MERBEIN PLOUGHS 3 DISCS PER SIDE WITH 6FT TOOLBAR - 0522 X2 INCL 0528

MURRAY SERIES 03 LEVELLING HARROW 4.64M, 3 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

JOHN BERENDS RM75 HD TRAILING OFFSET 22 PLATE 5MM DISCS - 0844, SUIT 60-130HP

GB 3.2M, 26 DISCS (160-220HP) HEAVY DUTY OFFSET DISCS

MURRAY SERIES 03 LEVELLING HARROW 2.56M, 4 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 4 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

CELLI 1.85M (70-120HP) ERGON ROTARY HOE

Farm Supplies Machinery & Equipment

Dealer Address