Farm Supplies Machinery & Equipment

Rotavator Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX ROTAVATOR BLADE SQUARE (RH) 80 X 8MM

SPAREX ROTAVATOR BLADE SQUARE (LH) 70 X 7MM

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 24inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2510kg
No of bearings: 16
No of axles: 8
Cutting width: 3.66m (12ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 5MM SCALLOP DISCS - 0853, SUIT 75-165HP

4.19m Murray Series 03 Levelling Harrow 5 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3809 - 4.19m (13ft 9in) (20 Row) 2/15 Tine, 3/20 Tine - 122kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 4.19M, 5 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

Series 39 Hydraulic folding wing frame with 6 section folding S44 Broadacre Stump Jump Harrow. 5.1m coverage. Transport width: 3.6m.
Please note that 3 point linkage pins are not supplied.
Murray Series 39 Hydraulic Folding Harrow Frames provide a solution to the transportation of multiple Harrow sections.
Designed to fit Category I or II three-point linkage systems, Murray Series 39 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and hydraulic folded wings.
Murray Series 39 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Series 39 Folding Harrow Frames are supplied complete with centre section, wing attachments and all rings and links to suit your harrow type and size.
Specifications:
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 5.1M HYDRAULIC FOLDING FRAME BROADACRE STUMP JUMP HARROW

Series 08 - 3.45m Stump Jump Harrow System with Standard 4 point pull drawbar - Complete Set.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and 4 Point Pull Drawbar.
8104 - 4 Section with bar 3.45m (11ft 4in).
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 3.45m (11ft 4in)
- Weight 204kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 3.45M STUMP JUMP HARROW WITH STD 4 POINT PULL DRAWBAR COMPLETE SET- SERIES 08

A robust harrow ideal for pasture renovation, landscaping, horse arenas, race tracks, sports fields and for seed/fertiliser incorporation.

JOHN BERENDS 10FT PASTURE HARROWS - 0404

Tine specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX TRACK ERADICATOR TINE

4ft Disc Harrows recommended for tractors 15-35HP
12" notched x 16" diameter disc blades for superior penetration.
4ft working width.
Category one hitch pins.
Dimensions = 129 x 113 x 72 (cm)
Weight = 170 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 4FT OFFSET DISC HARROWS - 12X16 INCH DISCS - 4DH -SUIT 15-35HP

SPAREX ROTAVATOR BLADE SQUARE (RH) 90 X 10MM

RM40 24 Plate Heavy Duty Trailing Offset 0824
The RM40 is one of the most popular of our wide range of offset and tandem disc cultivating ploughs.
Features:
Great digging ability ideal for primary and secondary tillage using 40Hp to 90HP tractors.
Twin pressure screws each side can be adjusted individually.
Easy gang adjustment for the perfect level finish.
Solid cast spools individually machined to suit the disc for extra strength.
Triple sealed bearings.
230mm (9 inch) disc spacing.
Fitted with 560mm x 5mm (22 inch x 3/16 inch) scalloped discs.
28mm square high tensile gang bolts.
Weight where it counts in the gang not ballast on the frame (which adds load to the bearings) like most other machines.
Prong type scrapers are standard equipment formed scrapers available on request.
Fully adjustable drawbar adjustable offset ideal for orchards.
Fitted with Holden type tyres.
Specifications:
Approx Weight 1230kg
No. Bearings 8
Cutting Width 2.74m (9ft)
No. Axles 4
Options:
0951 Optional Jack
0953 Optional Furrow filler (not sold separately)
* Upgrade to 24 inch x 5mm discs POA

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM40 24 PLATE HEAVY DUTY TRAILING OFFSET - 0824, SUIT 40-90HP

The RM80 offset disc cultivating plough is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 26inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2510kg
No of bearings: 16
No of axles: 8
Cutting width: 3.66m (12ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 26 INCH 6MM SCALLOP DISCS - 0873, SUIT 75-165HP

Find Tillage AND Seeding For Sale. Browse 969 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

SPAREX ROTAVATOR BLADE SQUARE (RH) 80 X 8MM

SPAREX ROTAVATOR BLADE SQUARE (LH) 70 X 7MM

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 5MM SCALLOP DISCS - 0853, SUIT 75-165HP

MURRAY SERIES 03 LEVELLING HARROW 4.19M, 5 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

MURRAY 5.1M HYDRAULIC FOLDING FRAME BROADACRE STUMP JUMP HARROW

MURRAY 3.45M STUMP JUMP HARROW WITH STD 4 POINT PULL DRAWBAR COMPLETE SET- SERIES 08

JOHN BERENDS 10FT PASTURE HARROWS - 0404

SPAREX TRACK ERADICATOR TINE

SOUTHERN CROSS AG MACHINERY 4FT OFFSET DISC HARROWS - 12X16 INCH DISCS - 4DH -SUIT 15-35HP

SPAREX ROTAVATOR BLADE SQUARE (RH) 90 X 10MM

JOHN BERENDS RM40 24 PLATE HEAVY DUTY TRAILING OFFSET - 0824, SUIT 40-90HP

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 26 INCH 6MM SCALLOP DISCS - 0873, SUIT 75-165HP

Farm Supplies Machinery & Equipment

Dealer Address