Farm Supplies Machinery & Equipment

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75HP-165HP tractors.
Fitted with 24inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 1970kg
No of bearings: 12
No of axles: 6
Cutting width: 2.74m (9ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 24 INCH 6MM SCALLOP DISCS - 0861, SUIT 75-165HP

Note: This model does include a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 16
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 1.6M S-TINE (16 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 32HP

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1930kg
No of bearings: 8
No of axles: 4
Cutting width: 2.74m (9ft)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 5MM DISCS - 0832, SUIT 60-130HP

The Maxi Doble rotary hoe is well suited to rugged conditions such as sugar cane, cotton, broadacre and large vegetable farms. It can be hydraulically folded for transport, storage and maintenance.
The range features DuoCone seals and Hardox rotor flanges.
Specifications:
Tractor HP: 240-400 HP
Connection Type: Linkage
Gearbox: single speed (1000 RPM)
Working Width: 5600mm
Working Depth: 100-200mm
Blades: 132 x L
Folded Width for Transport: 2680mm
Weight: 2600kg
Features:
- Side discs
- Side gear drives
- Wheel track eradicators
- Hardox rotor supports
- 1 3/4" 20 spline PTO with cam clutch
- 6 L blades per flange with double flanges
- Store folded
- Duo cone seals
Options:
- Cage roller (450mm)
- Packer roller (500mm)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 5.6M MAXI DOBLE FOLDING ROTARY HOE (240-400HP)

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3980kg
No. of Bearings: 20
No. of axles: 8
Cutting width: 5.26m (17ft 3inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 44 PLATE X 26 INCH DISCS - 0964

Super heavy duty power harrow for tractors up to 250 hp. For the most demanding agricultural conditions, contractors and large horticultural operations.
Specifications:
Actual Width: 355cm
Working Width: 350cm
Required HP:160-250hp
Weight: Cage roller - 1450kg, Packer roller - 1640kg
No of Blades: 28
Features:
Rated up to 250hp
Two speed gearbox
1000rpm
Category two linkage
Swinging lower links
Rear levelling bar with winder control and indicator
Tine locking counter plates
Rear levelling bar with winder height control and indicator
Hydraulic depth control
330 x 100 x 18mm tines
Swept back, low hp requirement tines
330mm working depth
45 degree sliding side plates
Cam clutch
Greasable top bearings
Rotor protectors are standard
Accessories:
Oil cooler kit
Track eradicators - fits onto front bar (each)
Tungsten dipped tines
Options:
Roller Options
Cage roller (440mm diameter)
Packer roller (470mm diameter)
Models:
MAXI350 350cm Working Width 160-250HP 28 Tines
MAXI400 400cm Working Width 180-250HP 32 Tines
MAXI450 450cm Working Width 200-250HP 36 Tines
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.5M (160-250 HP) MAXI POWER HARROW

Aerators relieve soil compaction without damaging the grass you already have and prevent rain runoff on your paddocks. Aeration involves perforating the soil with slots to allow water, air, and nutrients to penetrate down to the grassroots.
Did you Know?
New science has shown that aeration is vital to soil health. Aeration supports the living layer of your soil by creating channels for air and water to feed the aerobic bacteria that live below the surface of the soil. Through aeration, the air is allowed to penetrate the first 100 cm of the soil to support aerobic bacteria growth. Aerobic microbes need air to properly stabilize soil PH and convert organic matter to plant-available nutrients. This microbial activity has been found to increase the water of the soil holding capacity.
Channel and cracks in the soil profile allow rain and irrigation to be easily absorbed by your soil where it's needed instead of running off into the creek. Aeration breaks surface crust and creates deep channels and cracks that drastically increase your soil's ability to absorb moisture. This process helps develop vigorous deep root systems helping your plants become more drought resistant. Deep-rooted plants also have a far greater uptake of minerals and trace elements, ultimately resulting in healthier livestock.
When is it best to aerate your paddocks?
As we all know The best day to plant a tree is... 30 years ago. The second best day is today. It's the same for aeration.
The benefits of aeration are compounded treatment after treatment. we suggest using your Aervator the day it arrives. no matter what time of year that is providing your soil is not waterlogged.
Often we find that annual or biannual use gives the best results though this depends on your soil.
Aussie farmers also use aeration to greatly increase the availability of fertilizer to your plant's root zone by creating a path for the fertilizer to penetrate deep into the soil.
How to Aerate?
The rotating tine has a very clean action designed to aerate by opening and shattering the topsoil with minimal damage to existing plants, This action is vertical tillage AKA VerTill.
The Design of the Aervator's tines allows them to twist as they pass through the soil this is intentional. Through this motion, the Aervator is able to shatter the soil, greatly reduce compaction and create pathways for air-water, and nutrients to enter your plants' root zone.
For best results the Aervator requires two factors:
Weight. Weight is built into our heavy-duty, over-spec Australian steel frames. If you find your tines are not fully penetrating the soil you have a compaction issue but don't worry we have you covered, just add our optional concrete blocks and those tines will dig into even the most compact paddocks in as little as two passes.
Speed. The Aervator ideally needs to travel at 7 - 10 kph for the tines to achieve the shattering effect.
Specifications:
Size: 6000mm
Cultivation Width: 5750mm
Transport Width: 2800mm
No. Tines Per Rotor: 4
Rotors Per Gang: 8 on inner gangs, 4 on outer gangs
No. Gangs: 4
Mounting: Trailing
Approx Weight: 1800kg+
Min HP Req: 130
Standard Features:
- Hot dipped galv finish
- Two rows of gangs
- Tines are spaced at 95mm
- Large rotor bearings
- Multi-gang system
- Aeration and cultivation settings
- Gang angle adjustable from 0-10 degrees.
- Gang adjusting spanner supplied
- Rear tow hitch
- Cat 1-2 pick up
- Built-in weight trays
Available Configurations:
3PL or trailing
fixed or folding frame
2.4 to 5-meter working width
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AERVATOR GH SERIES FOLDING 6M - GH-6004 CFT. MIN 130+ HP (3PL)

Medium duty rotary hoe with gear side drive. Suitable for tractors up to 55 hp.
Specifications:
Actual Width: 190cm
Working Width: 175cm
Required HP: 25hp
Weight: 322kg
No of Blades: 36
Features:
Rated up to 55hp
Single speed gearbox
540 rpm
Side gear drive
70 x 7mm "L" blades
200mm working depth
Side-skids
Foot stand
Slip clutch
Models:
APLHA 155 160cm Working Width 25-55hp 310 kg 36 Blades
APLHA 165 175cm Working Width 25-55hp 322 kg 36 Blades
APLHA 185 185cm Working Width 30-55hp 330 kg 42 Blades
APLHA 155 155cm Working Width 35-55hp 342 kg 42 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.75M (55HP GEARBOX) ALPHA ROTARY HOE

Strong compact tandem disc ideal for vineyards, orchards and horticulture.
Features:
Excellent digging ability.
Easy ratchet gang adjustment.
Available in 16, 20 and 24 plate models.
Buster tine removes centre ridge to create a level finish.
Solid cast spools are individually machined to suit the disc for extra strength.
230mm (9 inch) spacing.
Fitted with 560mm x 5mm (22 inches x 3/16 inch) scalloped discs as standard.
28mm square high tensile gang bolts.
Triple sealed bearings.
Options:
0946 Optional Scrapers suit 16 plate TH30
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH30 16 PLATE HEAVY DUTY TANDEM DISCS - 0814

Flat Point specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX FLAT POINT - LH THICKNESS (LEMKEN)

Rigid box construction rotary hoes suitable for ground preparation on small farms and market gardens.
Features:
40 HP single speed gearbox.
1650mm working width.
Side chain drive with auto tensioner.
32 x C blades.
Cat I or II three point linkage.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Market: Ag Lifestyle
Connection Type: Linkage
Min Tractor PTO HP: 30-40 HP
Working Width (mm): 1650
Working Depth (mm): 50-150
Product Weight (kg): 245
Total Width (mm): 1820
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 1.65M B40F ROTARY HOE (MIN 30-40HP)

Reversible point specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX REVERSIBLE POINT - 295 X 65 X 8MM

Find Tillage AND Seeding For Sale. Browse 970 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 24 INCH 6MM SCALLOP DISCS - 0861, SUIT 75-165HP

JOHN BERENDS 1.6M S-TINE (16 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 32HP

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 5MM DISCS - 0832, SUIT 60-130HP

BREVIGLIERI 5.6M MAXI DOBLE FOLDING ROTARY HOE (240-400HP)

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 44 PLATE X 26 INCH DISCS - 0964

CELLI 3.5M (160-250 HP) MAXI POWER HARROW

AERVATOR GH SERIES FOLDING 6M - GH-6004 CFT. MIN 130+ HP (3PL)

CELLI 1.75M (55HP GEARBOX) ALPHA ROTARY HOE

JOHN BERENDS TH30 16 PLATE HEAVY DUTY TANDEM DISCS - 0814

SPAREX FLAT POINT - LH THICKNESS (LEMKEN)

BREVIGLIERI 1.65M B40F ROTARY HOE (MIN 30-40HP)

SPAREX REVERSIBLE POINT - 295 X 65 X 8MM

Farm Supplies Machinery & Equipment

Dealer Address