Farm Supplies Machinery & Equipment

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 4130kg
No. of Bearings: 24
No. of axles: 12
Cutting width: 5.71m (18ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 48 PLATE X 24 INCH DISCS - 0977

Series 38 Manual winch rigid frame with 3 section rigid S08 Stump Jump Harrow. 2.59m. Transport width: 2.68m.
Centre Frame only, no wings, winch, locking pins or hinges included.
Please note that 3 point linkage pins are not supplied.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 2.59M (3 SECTION) RIGID FRAME STUMP JUMP HARROW

3.25m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3505 - 3.25m (10ft 8in) 2/12 Tine, 2/16 Tine - 58kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Murray 4 sections with bar, 3.86m Series 04 Diamond Harrow System. Complete set with standard drawbar.
4104 - 4 sections with bar - 3.86M
Suitable for open country and lighter loamy soils, Murray Diamond Harrows are an effective implement used for weed control and final seedbed preparation.
Specialising in shattering soil crusts allowing improved aeration and moisture penetration, it will give your crops every chance of reliable germination and subsequent vigour.
The Diamond frame design is constructed using flat bar material providing the Harrow with strength and rigidity. It features replaceable bolt-in 16mm square section High Carbon Steel tapered tines with a working depth between 50 to 80mm (2 to 3).
Murray Diamond Harrows are supplied in sets complete with drawbars, ranging from 2 sections 2.03m (68) to 10 sections 10.16m (334). Lift type sets using our 3 Point Linkage Hoist Frame (Series 21) are available, making transportation of your Harrows easy and convenient. The complete set is comprised of a Front Lift Drawbar, Harrow Sections, Rear Lift Drawbar and 3 Point Linkage Hoist Frame (Series 21).
Features:
- 2 Point Pull (2PP). Replaceable bolt-in 16mm square section High Carbon Steel tapered tines.
- Manufactured from flat bar material
Specifications:
-30 kg (66lb).
- Coverage 0.97M (32).
- Tine Spacing 51mm (2).
- Tine Length 152mm (6) approx
- Centre to centre of Front Hooks 508mm (20).
- 5 Rank / 20 Tines.
- Tapered Tines with working depth between 50 80mm (2 3)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 3.86M DIAMOND HARROW SYSTEM 4 SECTIONS WITH BAR-COMPLETE SET WITH STANDARD DRAWBAR

Light duty power harrow for tractors up to 80 / 100hp. Suitable for small agricultural applications.
Specifications:
Actual Width: 205cm
Working Width: 200cm
Required HP: 50-80hp
Weight: Cage roller - 610kg, Packer roller - 690kg
No of Blades: 16
Features:
Rated up to 80hp
319 rotor speed
540 rpm
Category one linkage / two linkage
Rear levelling bar with winder height adjustment
Manual depth control
260 x 90 x 10mm tines
260mm working depth
45 degree sliding side plates
Shearbolt safety on Driveshaft
Greasable top bearings
Accessories:
Four speed gearbox (rated to 100hp)
Cam clutch (in lieu of shearbolt) on driveshaft
Options:
Roller Options
Cage roller (385mm diameter)
Packer roller (420mm diameter)
Models:
GO200 200cm Working Width 50-80HP 16 Tines
GO225 225cm Working Width 60-80HP 18 Tines
GO250 250cm Working Width 65-80HP 20 Tines
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2M (50-80 HP) GO POWER HARROW

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3500kg
No. of Bearings: 16
No. of axles: 8
Cutting width: 3.88m (12ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 32 PLATE X 26 INCH DISCS - 0961

Heavy duty rotary hoe suitable for tractors up to 190hp. 190F-280 (140-190 HP).
Specifications:
Actual Width: 307cm
Working Width: 285cm
Required HP: 130-190hp
Weight: 1120kg
No of Blades: 60
Features:
Rated up to 190hp
Two speed gearbox
1000rpm
Swinging lower links
Gear side drive
80x8mm L blades
6 blades per flange
250mm working depth
Side skids
Two piece adjustable, spring loaded frangor tailgates
Foot stand
Slip clutch
Options In Lieu of Standard:
Rotor Options
Spike rotor spike (30x30x170)
Anti-pan rotor (straight blade)
Roller Options
Cage roller (440mm diameter)
Packer roller (470mm diameter)
Accessories:
Oil cooler kit
Bolt on double flange kit per flange
Hydraulic adjustment for rear roller
Hydraulic tailgate adjustment
Rear steel wheels
C (speed) blades in lieu of L blades
Sugar Cane/Pineapple Version (Tiger 190F-305-SC):
Heavy headstock with oil cooler
100x100mm front beam
10mm blades
500mm diameter rear Cage roller
Hydraulic roller adjustment
Models:
TIGER190F-255 260cm Working width 130-190hp 1120kg 60 Blades
TIGER190F-280 280cm Working width 140-190hp 1180kg 66 Blades
TIGER190F-305 310cm Working width 155-190hp 1240kg 72 Blades
TIGER190F-305-SC 310cm Working width 155-190hp 1240kg 72 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.85M (140-190HP) TIGER ROTARY HOE

Heavy duty rotary hoes intended for large farms, specialised operations and contractors. They are designed to work in heavy conditions with a wide choice of accessories.
The versatility allows better tillage results on many ground types.
Features:
170 HP multi speed gearbox with rear PTO (1000 RPM).
2800mm working width.
66 x L blades total.
Side gear drive.
CE safety guards.
Floating front hitches.
Rear door with spring and pin adjustment.
1 3/8in 21 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Product Code: B170V-280
Min Tractor PTO HP: 90-170 HP
Working Width (mm): 2800
Working Depth (mm): 100-200
Product Weight (kg): 1080
Total Width (mm): 3000
Weight with Optional Cage Roller:
Product Weight (kg): 1200
Weight with Optional Packer Roller:
Product Weight (KG): 1360
Options:
Front Depth Wheels
Pair of Side Discs
Wheel Track Eradicator
Double Flange
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 2.8M B170 ROTARY HOE (MIN 90-170HP)

Note: This model does not include a crumbler, however, it is available as an option. The second & third picture of this listing shows the cultivator with a crumbler.
Features:
Heavy duty model features a 50×50 RHS frame throughout with larger tines, providing a heavier and more rigid machine for hard ground and primary cultivation.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16) tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 20
Tine Size: 45mm x 12mm
Frame Size: 50mm x 50mm RHS
Tractor HP Guide: 3HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Solid Rubber Depth Wheels
HD Tine helpers
3m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3M S-TINE (20 TINES) HEAVY DUTY CULTIVATOR - MIN 60HP

Designed for extremely tough conditions and is one of the strongest linkage disc ploughs available. Heavy weighted gangs provide excellent digging ability.
Features:
Each machine takes approximately 2-3HP per disc to pull, depending on conditions.
Prong scrapers are also available for heavy clay soil.
Twin spring loaded pressure screws prevent damage in rocky or undulating conditions.
Easy gang angle adjustment.
Fitted with hard wearing European Bellota Boron discs at 9 inch spacing. Available in 22x5mm(or optional 24x5mm sizes).
Cat 1 & 2 linkage.
28mm square high tensile axles.
Greaseable flanged disc bearings with excellent sealing to exclude contaminants.
Solid cast spools, individually machined, provide all the weight in the gangs rather than in the frame (which can add load onto the bearings.
Specifications:
Disc Size 22inch dia, 5mm thick, Scallop Disc
Approx Weight- 940kg
No. Bearings
No. Axles 4
Cutting Width 2.74m(9ft)
Options:
0950 Optional Scrapers suit 24 plate GM40.
0953 Optional Furrow filler (not sold separately).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GM40 24 PLATE HEAVY DUTY OFFSET DISCS - 0813,2-3HP PER DISC

3.25m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3305 - 3.25m (10ft 8in) - 2/9 Tine, 2/12 Tine - 46kg
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

The Doble rotary hoe is well suited to rugged conditions such as sugar cane, cotton, broadacre and large vegetable farms.
Its purpose built with two robust side frames that hydraulically fold for transport and storage.
Specifications:
Tractor HP: 180-220 HP
Connection Type: Linkage
Gearbox: single speed (1000 RPM)
Working Width: 4000mm
Working Depth: 100-200mm
Blades: 96 x L
Folded Width for Transport: 2680mm
Weight: 2180kg
Features:
- 220HP single speed gearbox (1000 RPM)
- 6 L blades per flange with double flanges
- Side gear drives
- 1 3/4" 20 spline PTO with cam clutch
- Store folded
- Wheel track eradicators
- Hardox rotor supports
- Duo cone seals
Options:
- Cage roller (450mm)
- Packer roller (500mm)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 4M DOBLE FOLDING ROTARY HOE (180-220HP)

Find Tillage AND Seeding For Sale. Browse 972 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 48 PLATE X 24 INCH DISCS - 0977

MURRAY 2.59M (3 SECTION) RIGID FRAME STUMP JUMP HARROW

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

MURRAY 3.86M DIAMOND HARROW SYSTEM 4 SECTIONS WITH BAR-COMPLETE SET WITH STANDARD DRAWBAR

CELLI 2M (50-80 HP) GO POWER HARROW

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 32 PLATE X 26 INCH DISCS - 0961

CELLI 2.85M (140-190HP) TIGER ROTARY HOE

BREVIGLIERI 2.8M B170 ROTARY HOE (MIN 90-170HP)

JOHN BERENDS 3M S-TINE (20 TINES) HEAVY DUTY CULTIVATOR - MIN 60HP

JOHN BERENDS GM40 24 PLATE HEAVY DUTY OFFSET DISCS - 0813,2-3HP PER DISC

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

BREVIGLIERI 4M DOBLE FOLDING ROTARY HOE (180-220HP)

Farm Supplies Machinery & Equipment

Dealer Address