Farm Supplies Machinery & Equipment

Wheel kits to suit 8ft SXM Twin Rotor slasher.
Two kits recommended for the 8ft slasher.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY H/DUTY SLASHER WHEEL KITS - SUIT SXM 8FT TWIN ROTOR SLASHER

Daken Depth wheel (ONLY) for D180.
About the Grader Blade the wheel belongs to:
The Daken D180 Grader Blades are suitable for tractors up to 60hp and feature a deep reinforced mould board fitted to a reversible cutting edge that can pivot through 360 deg. The Grader Blade itself includes a bolt-on, reversible cutting edge, and pin adjustment offset control. The depth wheel option (this listing) helps to assist with levelling and road work.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN ADJUSTABLE DEPTH WHEEL (ONLY) TO SUIT GRADER BLADE

This rear mounting hydraulic folding six metre mulcher is German engineering at its best.
Ideal for both pasture and stubble management along with general wide area mulching.
Manufactured from high quality QSt/E Steel with Headstock Cat. II & III for rear mounting.
Recommended for tractors 140-250HP.
Four rubber trailing wheels with 360° swivel.
Features:
Manufactured from High Quality Qst/E Steel with Headstock Cat.II & III for rear mounting.
Four rubber wheels, 360° swivel, height adjustable, 23X10.50-12.
Gearbox with integrated over run clutch for 1000 r.p.m.
Automatic belt tensioning.
Hood wear plates.
Hydraulic transport safety lock at an angle of 90°.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Well balanced spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Patented removable shredding bar System : Shark Fin.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the wheels guarantees perfect contour following and an even quality of cut.
Two single acting spool valves requested.
PTO shaft with cap bottom lubrication.
Warning signs and lights (LED mounted).
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Scrapper rail for MU-M/F 600 Vario (2 units must be ordered for entire working width).
Additional protection device for heavy duty work in extremely stony conditions.
Second screw-type short chopping bar system: "shark-fin design" - A Muthing patent (2 units must be ordered for entire working width).
Hydraulic powered central strip mulcher.
Operating hours counter with sensor, time recording via angular momentum.
Quick-hitch adapter, Cat. 3.
Model:
MU-M600 41.1 (4 Wheels) 6000mm 250 HP WW 6000mm Overall width 6200mm Weight 2500kg Flails 52
MU-M600 41.2 (Support Rollers) 6000mm 250 HP WW 6000mm Overall width 6200mm Weight 2500kg Flails 52
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-M600 MULCHER - HYDRAULICALLY FOLDING INC 4 SUPPORT WHEELS

Rasspe Radura Mower Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA MOWER BLADE TAPERED - 131 X 50 X 4MM (RH & LH) - REPLACEMENT FOR TAARUP

Mower Blade Retainer.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX MOWER BLADE RETAINER - M12, 33MM LENGTH - REPLACEMENT FOR KUHN, TAARUP

Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
Features on our Mulchers make the full range stand out from the opposition.
The AMM series is a medium duty mulcher suitable for pastures and crops. Residues are finely chopped and the swath evenly spread over the ground providing a mulch to improve soil moisture retention and seed germination.
Features:
- 155cm cutting width
- European gearbox (30HP)
- Clevis hitch cat 1 three point linkage.
- Chain top link.
- 4mm Body panel to withstand obstacle impact.
- Blades pivoting on hardened bushes and grade 8 bolts.
- Adjustable height skids.
- Built-in mulching bar.
- 6 series European driveshaft comes with integral clutch
Optional extras:
- Friction clutch
- Height roller
- Twin height wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM MULCHER AMM SERIES 155CM (30HP) - AMM/155

SHW Loader Tine Nut. Specifications shown in images.

SHW LOADER TINE NUT - M20

500mm DR4 Series Auger (Dedicated rock - Rotating Picks) up to 5T for Ramdrill PHD - Hydraulic drive.
Price inclusions: Auger, teeth, pilot, pin and clip.
DR4 dedicated rock
DR augers feature rotating rock picks for drilling from soft fracturable rock to very hard rock. Featuring short flighting, the design encourages regular spoil removal, allowing cool air to enter the hole, and facilitate regular tooth inspection. Watch our rock auger overview video.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: Dedicated rock
- Standard Hub: 65mm Round
- Hub Options: 75mm square
- Overall Length: 1200 mm
- Flights (Lead): 12 mm
- Flights (Carry): 8 mm
- Teeth: 19 mm Rotating Rock Pick
- Pilot: DRP-19-15
Optimum Drilling Speeds - RPM:
- Earth: not recommended
- Clay: not recommended
- Shale (Fracturable Rock): 25-45
- Heavy Rock: 10-25
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 500MM AUGER (DEDICATED ROCK) FOR RAMDRILL - HYDRAULIC DRIVE

600mm 4 Series Auger up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 600MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

400MM 4 Series Auger (Heavy conditions-(MFT) Multi Facet Tungsten-Hard ground) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 400MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD - HYDRAULIC DRIVE

150mm - 1 Series Auger for Post Hole Borer.
Standard conditions - Tungsten Carbide.
A1 soft earth
Bladed teeth for soft earth/clay.
Earth Auger for general purpose drilling.
Designed to reduce auger jam, the A1 auger features its cutters on one side as well as a restrictor plate to reduce overrun.
Available in earth or tungsten carbide (TC), providing longer wear life and greater cutting performance. Not suited for rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
Specifications:
- Drilling Conditions: Soft earth
- Hub: Stihl Style 25mm Round
- Overall Length: 960mm
- Flights (Lead): 6mm
- Flights (Carry): 6mm
- Teeth: TS
- Pilot: PS
- Ideal Drives: One man borer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 150MM AUGER (STANDARD - TUNGSTEN CARBIDE) FOR POST HOLE BORER

Mower Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA MOWER BLADE TWISTED - 122 X 45 X 4MM (LH) - REPLACEMENT FOR KUHN, CLAAS, NEW HOLLAND, JOHN DEERE

Find Machinery Attachments For Sale. Browse 1356 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

SOUTHERN CROSS AG MACHINERY H/DUTY SLASHER WHEEL KITS - SUIT SXM 8FT TWIN ROTOR SLASHER

DAKEN ADJUSTABLE DEPTH WHEEL (ONLY) TO SUIT GRADER BLADE

MUTHING MU-M600 MULCHER - HYDRAULICALLY FOLDING INC 4 SUPPORT WHEELS

RASSPE RADURA MOWER BLADE TAPERED - 131 X 50 X 4MM (RH & LH) - REPLACEMENT FOR TAARUP

SPAREX MOWER BLADE RETAINER - M12, 33MM LENGTH - REPLACEMENT FOR KUHN, TAARUP

AGRIFARM MULCHER AMM SERIES 155CM (30HP) - AMM/155

SHW LOADER TINE NUT - M20

DIGGA 500MM AUGER (DEDICATED ROCK) FOR RAMDRILL - HYDRAULIC DRIVE

DIGGA 600MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

DIGGA 400MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD - HYDRAULIC DRIVE

DIGGA 150MM AUGER (STANDARD - TUNGSTEN CARBIDE) FOR POST HOLE BORER

RASSPE RADURA MOWER BLADE TWISTED - 122 X 45 X 4MM (LH) - REPLACEMENT FOR KUHN, CLAAS, NEW HOLLAND, JOHN DEERE

Farm Supplies Machinery & Equipment

Dealer Address